Snapper 555 manual Storage, Lubrication Check / Lubricate FREE-HAND Linkage

Page 20

LUBRICATION CHECK / LUBRICATE FREE-HAND LINKAGE

Check the function of the Free-Hand controls: the con- trols should function as described in the CONTROLS section. It is critical for the safe operation of the unit that the controls disengage when released.

If the controls do not function properly, lubricate them. If lubrication does not rectify the problem, see your dealer. Under no circumstances should the unit be used if the controls are not functioning properly.

IMPORTANT NOTE

Storage

Figure 17. Lubricate Free Hand Control

It is very important that grease fittings on the auger shaft are lubricated regularly. If auger rusts to shaft, damage to worm gear may occur if shear pins do not break.

LUBRICATING THE AUGER SHAFT & ASSEMBLY

1.Remove cotter pin (C, Figure 18) and shear pin (B).

2.Use a grease gun and squirt several shots of grease into grease fitting (A).

3.Rotate auger assembly (D) several times to distribute the grease evenly. Repeat step 2.

4.Reinstall shear pin (B) and cotter pin (C).

5.Repeat procedure for other side.

STORAGE

WARNING

Never store the unit (with fuel) in an enclosed, poorly ventilated structure. Fuel vapors can travel to an ignition source (such as a furnace, water heater, etc.) and cause an explosion.

Fuel vapor is also toxic to humans and animals.

C

B

A

B

C

A

D

D

Figure 18. Checking Auger Gear Case Lubrication

A.

Grease Fittings

C. Cotter Pins

B.

Shear Pins

D. Auger Assembly

Before you store your unit for the off-season, read the Maintenance and Storage instructions in the Safety Rules section, then perform the following steps:

•Disengage the PTO, set the parking brake, and remove the key.

•Perform engine maintenance and storage measures listed in the engine owner’s manual. This includes draining the fuel system, or adding stabilizer to the fuel (do not store a fueled unit in an enclosed struc- ture - see warning).

Before starting the unit after it has been stored:

•Check all fluid levels. Check all maintenance items.

•Perform all recommended checks and procedures found in the engine owner’s manual.

•Allow the engine to warm up for several minutes before use.

19

Page 19 Page 21
Image 20
Page 19 Page 21
Contents OPERATOR’S Manual ModelsTable of Contents Safety Rules & Information Safety Rules ChildrenPage Identification Numbers CE Identification TAG MarkingsNorth American CE ModelsSafety Decals GeneralNorth American Model Decals CE Model DecalsCE Safety Icons & Compliance Specs Features, Controls, & Operation ALL Models Tecumseh Models Briggs & Stratton ModelsFeatures & Controls Control LocationsEngine Controls Starting ControlsUnits with Optional Electric Start Manual StartGround Speed Controls Auger ControlDeflector Controls Scraper HeightOperation Checks Before Each START-UPStarting the Engine Operating the Snowthrower Clearing a Clogged Discharge ChuteGround Speed Selector Engine SpeedDeflector Scraper BAR & Skid ShoesFREE-WHEELING Traction Drive Lock After Each USECheck Auger Gear Case Lubrication Maintenance ScheduleChecking Tire Pressure Maintenance LubricationLubricating the Auger Shaft & Assembly StorageLubrication Check / Lubricate FREE-HAND Linkage StorageTroubleshooting, Adjustment, & Service TroubleshootingTroubleshooting Adjustments Traction Drive Clutch Cable AdjustmentInitial Adjustment Run-In AdjustmentManual Discharge Chute Control Linkage Adjustment Pinion Gear AdjustmentAuger Drive Clutch Cable Adjustment Drive Belt AdjustmentChecking Auger Belt & Belt Guide Adjustments Adjusting Auger Drive BeltAdjustments & Service Drive Belt ReplacementAdjusting Auger Belt Guide Traction Drive Belt ReplacementService Auger Drive Belt ReplacementRoller Chain Replacement Shear PIN ReplacementDimensions EngineChassis HP* TecumsehTechnical Manuals Replacement PartsMaintenance Items

555, 555M, 555M, 15225, E15225, 18245E, E18245, 860E, 860M specifications

Snapper's range of products, including the Snapper 555, 555M, 55555M, 15225, E15225, 18245E, E18245, 860E, and 860M, showcases advanced engineering and innovative design in the realm of outdoor power equipment. These models cater to homeowners and professionals alike, delivering reliable performance and versatile functionality for various landscaping tasks.

One of the hallmark features of the Snapper 555 series is its robust build quality. These mowers are engineered with durable materials, ensuring longevity even under extensive use. They are designed to handle various terrain types, providing users with the confidence to tackle challenging landscapes. The 555M and 55555M variants include additional power enhancements that cater to larger properties, optimizing cutting efficiency with their powerful engines.

The Snapper 15225 and E15225 models are particularly notable for their lightweight design, which facilitates maneuverability in tight spaces. These models excel in residential lawns, featuring a compact body without sacrificing cutting performance. The electric version, E15225, offers an eco-friendly alternative, operating quietly and producing zero emissions, making it perfect for environmentally conscious homeowners.

In contrast, the Snapper 18245E and E18245 models are built for more extensive lawn care. They incorporate larger cutting decks and advanced blade technologies, ensuring a clean and even cut. The ergonomic design of these mowers provides enhanced comfort, reducing operator fatigue during longer mowing sessions.

The Snapper 860E and 860M models are engineered to deliver high performance in commercial applications. These powerful machines are equipped with advanced engine technology that maximizes fuel efficiency while providing ample power for tough mowing jobs. Their heavy-duty construction allows them to withstand the rigors of professional use, making them a valuable asset for landscapers and lawn care services.

Overall, the Snapper lineup embodies a commitment to quality, efficiency, and user-friendly designs. Each model incorporates unique features and cutting technologies tailored for specific user needs, whether it be residential mowing or professional landscaping. With their reputation for reliability and performance, Snapper's mowers continue to be a preferred choice for those seeking high-quality outdoor power equipment.
Top Page Image Contents