Snapper 17524EX, 175246E Safety Decals, General, North American Model Decals, CE Model Decals

Page 7

Safety Decals

GENERAL

This unit has been designed and manufactured to pro- vide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing.

Although reading this manual and safety instructions it contains will provide you with the necessary basic knowl- edge to operate this equipment safely and effectively, we have placed several safety labels on the unit to remind you of this important information while you are operating your unit.

All safety and instructional messages on your unit should be carefully read and obeyed. Personal bodily injury can result when these instructions are not followed. The information is for your safety and it is important. The safety decals below are on your unit.

If any of these decals are lost or damaged, replace them at once. See your local dealer for replacements.

These labels are easily applied and will act as a constant visual reminder to you, and others who may use the equipment, to follow the safety instructions necessary for safe, effective, operation.

NORTH AMERICAN MODEL DECALS

Part No. 7100821

WARNING / Main Dash Decal, North American Models

Auger

Engage

Auger

Disengage

1726946

Part No. 1726946

Auger Control Decal

Part No. 1733057

Discharge Chute Danger Decal

DANGER

Amputation hazard

Contact with the auger will cause serious injury.

• Keep hands, feet, and clothing away.

• Shut off engine before servicing.

1716532

Part No. 1716532

Auger Danger Decal

Part No. 1722867 Lubrication Decal

CE MODEL DECALS

 

 

 

 

 

 

 

 

1727023

 

Part No. 7100822

Part No. 1727023

WARNING / Main Dash Decal, CE Models

Auger Control Decal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Part No. 1727207

Part No. 1727208

Part No. 1722867

Discharge Chute Danger Decal

Auger Danger Decal

Lubrication Decal

6

Image 7
Contents OPERATOR’S Manual Table of Contents Safety Rules & Information Children Safety RulesPage ID Tag Location Identification NumbersCE Identification TAG Markings North American / CE Models CE Models onlyCE Model Decals Safety DecalsGeneral North American Model DecalsRefueling CE Safety Icons & Compliance SpecsALL Models Features, Controls, & OperationControl Locations Features & ControlsManual Start Engine ControlsStarting Controls Units with Optional Electric StartScraper Height Ground Speed ControlsAuger Control Deflector ControlsChecks Before Each START-UP OperationBriggs Stratton Models Starting the EngineClearing a Clogged Discharge Chute Operating the SnowthrowerGround Speed Selector Scraper BAR & Skid Shoes DeflectorAfter Each USE FREE-WHEELING Traction Drive LockKlik-Pin Outer Hole Checking Tire Pressure Maintenance ScheduleCheck Auger Gear Case Lubrication Lubrication MaintenanceStorage Lubricating the Auger Shaft & AssemblyStorage Lubrication Check / Lubricate FREE-HAND LinkageAuger does not rotate TroubleshootingEngine fails to start Engine starts hard or runs poorlyThrown far enough Scraper bar does not clean hardAuger does not stop when auger Auger rotates, but snow is notRun-In Adjustment AdjustmentsTraction Drive Clutch Cable Adjustment Initial AdjustmentMounting Nuts Pinion Gear AdjustmentDrive Belt Adjustment Auger Drive Clutch Cable AdjustmentRelease auger control. Auger must stop within 5 seconds Adjusting Auger Drive Belt Checking Auger Belt & Belt Guide AdjustmentsBelt Cover Traction Drive Belt Replacement Adjustments & ServiceDrive Belt Replacement Adjusting Auger Belt GuideAuger Drive Belt Replacement ServiceMaster link Direction of travel Roller Chain ReplacementShear PIN Replacement Keeper linkChassis DimensionsCE Compliance Specifications EngineMaintenance Items Replacement PartsTechnical Manuals