Snapper 17524EX, E175246E manual CE Safety Icons & Compliance Specs, Refueling

Page 8

Warning: Read Operator’s Manual.

Read and understand the Operator’s Manual before using this machine.

Danger: Thrown Objects.

This machine is capable of throwing objects and debris. Keep bystanders away.

Warning: Remove Key Before Servicing.

Remove the key, disconnect spark plug wire, and consult technical litera- ture before performing repairs or maintenance.

Danger: Burn Hazard.

Never touch a hot engine or muffler.

CE Safety Icons & Compliance Specs

Danger: Dismemberment.

The auger can amputate limbs. Keep hands and feet away from auger and rotating parts. Keep bystanders and children away when engine is running.

Danger: Dismemberment.

The impeller can amputate limbs. Stop the engine, remove the key, and disconnect spark plug wire before clearing the discharge chute or per- forming service work. Keep hands and feet away from impeller and rotat- ing parts.

Danger: Breathing Hazard.

Do not run the engine indoors except for starting the engine or for transport- ing the snowthrower in or out of the building. Open the outside doors; exhaust fumes are dangerous.

Danger: Remove Key Before

Refueling.

Stop engine, remove key, and wait at least 2 minutes before refueling.

7

Image 8
Contents OPERATOR’S Manual Table of Contents Safety Rules & Information Safety Rules ChildrenPage Identification Numbers CE Identification TAG MarkingsNorth American / CE Models CE Models only ID Tag LocationSafety Decals GeneralNorth American Model Decals CE Model DecalsCE Safety Icons & Compliance Specs RefuelingFeatures, Controls, & Operation ALL ModelsFeatures & Controls Control LocationsEngine Controls Starting ControlsUnits with Optional Electric Start Manual StartGround Speed Controls Auger ControlDeflector Controls Scraper HeightOperation Checks Before Each START-UPStarting the Engine Briggs Stratton ModelsGround Speed Selector Operating the SnowthrowerClearing a Clogged Discharge Chute Deflector Scraper BAR & Skid ShoesKlik-Pin Outer Hole FREE-WHEELING Traction Drive LockAfter Each USE Check Auger Gear Case Lubrication Maintenance ScheduleChecking Tire Pressure Maintenance LubricationLubricating the Auger Shaft & Assembly StorageLubrication Check / Lubricate FREE-HAND Linkage StorageTroubleshooting Engine fails to startEngine starts hard or runs poorly Auger does not rotateScraper bar does not clean hard Auger does not stop when augerAuger rotates, but snow is not Thrown far enoughAdjustments Traction Drive Clutch Cable AdjustmentInitial Adjustment Run-In AdjustmentPinion Gear Adjustment Mounting NutsRelease auger control. Auger must stop within 5 seconds Auger Drive Clutch Cable AdjustmentDrive Belt Adjustment Belt Cover Checking Auger Belt & Belt Guide AdjustmentsAdjusting Auger Drive Belt Adjustments & Service Drive Belt ReplacementAdjusting Auger Belt Guide Traction Drive Belt ReplacementService Auger Drive Belt ReplacementRoller Chain Replacement Shear PIN ReplacementKeeper link Master link Direction of travelDimensions CE Compliance SpecificationsEngine ChassisTechnical Manuals Replacement PartsMaintenance Items