Chapter 2 Getting Started
Warranty Note
Quantum A-Series Tape Drives User’s Guide 9
Warranty NoteSee the warranty before installing your tape drive. Certain actions taken
during installation could void the warranty if not properly conducted.
Generally, the Limited Product and Limited Repair Warranties are
contingent upon proper use in the application for which the product is
intended; and do not cover the product if you perform any of the
following actions:
• Modify the product without the manufacturer’s written approval.
• Subject the product to unusual physical, environmental, or electrical
stress, including damage caused by handling or shipping in
unapproved containers or packaging.
• Disturb any warranty labels, or the integrity of the product in any
other way.
• Remove or damage the serial number label to the extent that
warranty status of the product cannot be determined.
Safety, Handling, and ESD ProtectionInappropriate or careless handling of the A-Series tape drives may result
in damage to the product. Follow the precautions and directions to
prevent damaging the tape drive.
Safety Precautions 2For your safety, follow all safety procedures described here and in other
sections of the manual.
1Power off the system before installing or removing the tape drive to
prevent the possibility of electrical shock or damage to the tape drive.
Unplug the unit that contains—or is to contain—the tape drive from
AC power to provide an added measure of safety.
2Read, understand, and observe all label warnings.