Functional Specifications
Quantum A-Series Tape Drives User’s Guide 38
Current and Power
Requirements 1The tape drive draws the highest current (and power) during the native
write modes. Standby is measured with the tape loaded and tensioned or
untensioned, and Idle is measured with power on with no tape loaded.
(The power drawn in these two modes is similar enough that they are
listed together.)
Table 12 Current
Requirements — SCSI
Interface
Application X,Y,Z axes Sweep rate = 1.0 octave/
minute
Note: In table 12, the current and DC power values pertain to the
internal tape drive, while the AC power values apply to the
tabletop tape drive.
Mode
5 V Current (A)
MaxPk1
MaxMean2
Typ3
12 V Current (A)
MaxPk1
MaxMean2
Typ3
DC Power (W)
Max4
Typ5
AC Power (W)
Max6
Typ7
Standby/Idle 2.5 2.5 2.5 0.7 0.7 0.7 2.5 2.5 2.5 0.7
Media Loading/
Unloading
3.8 3.8 3.4 2.2 2.1 1.7 3.8 3.8 3.4 2.2
600A Write –
Motor Start83.4 3.4 3.3 2.0 1.2 1.1 3.4 3.4 3.3 2.0
600A Write –
Streaming
3.7 3.7 3.5 2.0 1.1 1.1 3.7 3.7 3.5 2.0
Shock