Snapper 2-9693 dimensions Battery

Page 2

STEP 5: Secure bracket and ground wire to auger housing with nuts; washers and bolts supplied with kit. See Figure 5.

STEP 6: Follow steps as described in #6-0770 Battery Kit to activate battery for mounting and usage.

STEP 7: Install battery and connect ground wire (black ground wire found in kit #6-0651) to negative terminal side of battery with nut and bolt as shown. Tighten nut and bolt securely; do not over tighten. See Figure 5 & 7.

STEP 8: Before mounting jump start switch connect positive red wire (longer red wire that mounts to battery) to switch button as shown. See Figure 6. Mount jump start switch onto control panel using nuts and bolts found in kit #6-0646 Jump Start Kit. See Figure 5.

STEP 9: Loosen nut that secures cable guide to engine base. Install black wire from jump start switch to stud and reinstall nut and tighten securely. See Figure 5.

STEP 10: Remove nut from starter motor and mount shorter red wire from jump start switch and reinstall nut and tighten securely. See Figure 5.

STEP 11: Before mounting positive red wire drill the end that mounts to battery terminal to 1/4” diameter. Mount positive wire (red) and charging wire to positive terminal side of battery with nut and bolt as shown. See Figure 5. NOTE: There are two different charging wires found in #6-0651 Battery Mounting Kit. Visually check charging wire and use the wire that corresponds with correct male and female connectors found on engine. Connect charging wire (male connector) into engine wire (female connector). Connect light wire harness (male connector) into charging wire (female connector).

STEP 12: Mount battery cover and secure with washers and wing nuts as shown. See Figure 7. Make sure all nuts and bolts are tight. All wire connections should be securely connected.

 

 

BATTERY

 

 

COVER

JUMP START

 

 

SWITCH

 

 

BLACK

ENGINE WIRE

 

WIRE

GROUND

 

 

POSITIVE RED

WIRE

SHORTER RED

GROUND

WIRE (TO

WIRE (TO

BATTERY)

WIRE

STARTER)

POSITIVE

 

 

TERMINAL

 

NEGATIVE

 

TERMINAL

STARTER

MOTOR

BATTERY

CABLE

STUD GUIDE CHARGING BATTERY

WIREMOUNTING

BRACKET

BATTERY

CLAMP

FIGURE 5

BLACK

FIGURE 7

WIRE

 

 

SHORTER

 

RED WIRE

 

(TO STARTER)

JUMP START

DRILL 1/4”

SWITCH

ASSEMBLY

RED WIRE

 

POSITIVE

 

RED WIRE

 

(TO BATTERY)

 

FIGURE 6

INSTRUCTION #2-9693 (I.R. 8/94)

PRINTED IN U.S.A.

Image 2
Contents Snapper Large Frame Snow Throwers Instruction #2-9693 I.R /94Battery

2-9693 specifications

Snapper 2-9693 is a versatile, high-performance garden tool that combines power, efficiency, and user-friendly design. This particular model stands out in the market due to its robust features and cutting-edge technologies, making it a preferred choice for both amateur gardeners and seasoned lawn care professionals.

One of the key features of the Snapper 2-9693 is its powerful engine, designed to deliver outstanding performance even in challenging conditions. The engine provides ample torque and speed, ensuring that grass and other garden materials are cut efficiently. It’s specifically designed to be both environmentally friendly and fuel-efficient, which means users can maintain their lawns while being conscious of their carbon footprint.

Equipped with a self-propelled drive system, the Snapper 2-9693 offers exceptional ease of use. This feature allows users to maneuver the mower effortlessly across various terrains, whether it be flat lawns, hilly yards, or uneven ground. The adjustable speed settings enable operators to set the pace that suits their particular garden, ensuring comfort and control throughout the mowing process.

The Snapper 2-9693 also boasts a wide cutting deck, which enables it to cover more ground in less time. This lessens the effort required to maintain larger lawns and gardens. Along with a variety of cutting heights, users can achieve the desired grass length while ensuring precision in their lawn care routine.

In terms of technological advancements, the Snapper 2-9693 incorporates an innovative blade technology that provides a clean, even cut. The design minimizes clumping and helps the clippings decompose faster, which enriches the soil naturally. Furthermore, the mower features a user-friendly starting system, which means users can get right to work without the frustration often associated with starting traditional mowers.

Durability is another hallmark of the Snapper 2-9693. It is constructed with high-quality materials that resist wear and tear, ensuring longevity and reliability. This resilience is crucial for users looking for a lasting investment in their gardening tools.

In summary, the Snapper 2-9693 is engineered for efficiency and ease of use, with its powerful engine, self-propelled drive, adjustable cutting heights, and advanced blade technology. These features make it an ideal choice for anyone seeking to maintain a beautiful lawn without compromising on performance or environmental responsibility.