Invacare Ranger IISTANDARD Battery Tray Figure, Retaining Front Battery Box Strap Rear Strap Clip

MWD WHEELCHAIRS PROCEDURE 14

6.If necessary, reinstall the removeable footboard. Refer to REMOVING THE REMOVABLE FOOTBOARD ASSEMBLY FROM THE WHEEL- CHAIR in PROCEDURE 3 of this Owner's Manual, part number 1080722.

Retaining	Front Battery Box
Strap
Rear	Retaining
	Strap Clip
Battery
Box	Front of the
	Wheelchair
	Battery Box
Battery Connections on	Leads
Side of Wheelchair Frame

FIGURE 7 - INSTALLING/REMOVING BATTERY BOXES

BATTERY TRAY (FIGURE 8)

Installing Battery Tray onto Wheelchair NOT Equipped Weight Shift Basic Tilt

1.If necessary, remove the shrouds. Refer to REMOV-

ING/INSTALLING SHROUDS - MWD WHEEL- CHAIRS in PROCEDURE 10 of this manual.

2.Turn the battery tray slightly to one (1) side.

NOTE: Make sure the end of the battery tray labeled "FRONT" is towards the front of the wheelchair.

3.Position the battery tray pins over the mounting slots on the hanger brackets.

WARNING

Make sure pins of battery tray are secure in the mounting slots of the hanger bracket, otherwise injury or damage may result.

4.Push down on the battery tray to secure in place.

5.Install the battery boxes. Refer to INSTALLING/RE- MOVING BATTERY BOXES in this procedure of the manual.

6.If necessary, install the shrouds. Refer to REMOV-

ING/INSTALLING SHROUDS - MWD WHEEL- CHAIRS in PROCEDURE 10 of this manual.

Installing Battery Tray onto Wheelchair Equipped Weight Shift Basic Tilt

1.If necessary, remove the shrouds. Refer to REMOV-

ING/INSTALLING SHROUDS - MWD WHEEL- CHAIRS in PROCEDURE 10 of this manual.

2.Turn the battery tray slightly to one (1) side.

3.Position the battery tray pins over the mounting slots on the hanger brackets.

WARNING

Make sure pins of battery tray are secure in the mounting slots of the hanger bracket, otherwise injury or damage may result.

4.Push down on the battery tray to secure in place.

5.Install the battery boxes. Refer to INSTALLING/RE- MOVING BATTERY BOXES in this procedure of the manual.

6.If necessary, install the shrouds. Refer to REMOV-

ING/INSTALLING SHROUDS - MWD WHEEL- CHAIRS in PROCEDURE 10 of this manual.

Removing

1.If necessary, remove the shrouds. Refer to REMOV-

ING/INSTALLING SHROUDS - MWD WHEEL- CHAIRS in PROCEDURE 10 of this manual.

2.Remove the battery boxes from the wheelchair. Re- fer to INSTALLING/REMOVING BATTERY BOXES in this procedure of the manual.

3.Lift up on the battery tray to release the battery tray pins from the mounting slots on the hanger brack- ets.

4.Turn the battery tray slightly to one (1) side.

5.Remove the battery tray from the wheelchair.

M W D

W

H

E

E

L

C H A I R S

69