CROSSBRACES | PROCEDURE 11 |
REPLACING CROSSBRACES - CAPTAIN'S SEATS (FIGURE 2)
1.Remove the captain's seat from the wheelchair. Refer toREMOVING/INSTALLINGCAPTAIN'SSEATinPRO- CEDURE 5 of the owner's manual, part number 1080722.
2.Remove the shrouds. Refer toREMOVING/INSTALL- ING SHROUDS in PROCEDURE 10 of this manual.
3.Perform one (1) of the following:
FWD WHEELCHAIRS -
A.Remove the battery boxes from the wheelchair. INSTALLING/REMOVING BATTERY BOXES in PROCEDURE 13 of this manual.
B.Foldthebatterytray.Referto FOLDINGBATTERY TRAY FOR TRANSPORT in PROCEDURE 13 of this manual.
MWD WHEELCHAIRS -
A.Remove the battery boxes from the wheelchair. INSTALLING/REMOVING BATTERY BOXES in PROCEDURE 14 of this manual.
B.Removethebatterytrayfromthewheelchair.Refer to INSTALLING/REMOVING BATTERY TRAY in PROCEDURE 14 of this manual.
4.Remove the hex bolts and locknuts that secure the two (2) pivot links to the existing crossbraces.
5.Remove the hex bolts, spacers, washers and locknuts that secure the two (2) push brackets to the existing crossbraces.
6.Removethe dustcovers from the bottomof the existing crossbraces.
NOTE: Note position of the tie wraps that secure the wiring harness to the existing crossbraces.
7.Cut the tie wraps that secure the wiring harness to the existing crossbrace.
8.Remove the hex bolts, washers and locknuts that se- cure the bottom of the two (2) existing crossbraces to the wheelchair frame.
9.Removethehexbolt,covedspacers,washersandlock- nutthatsecurethetwo(2)existingcrossbracestogether.
NOTE: Note coved spacer, washer and locknut order for reinstallation.
10.Remove the four (4) pivot tube plug pins from the bot- tom of the two (2) existing crossbraces.
11.Install the four (4) pivot tube plug pins into the bottom of the two (2) new crossbraces.
12.Assemble the two (2) new crossbraces together. Refer to DETAIL "C" in FIGURE 2 for hardware orientation.
13.Reinstall the hex bolts, washers and locknuts that se- cure the bottom of the two (2) new crossbraces to the wheelchair frame and tighten.
14.Secure the wiring harness to the new crossbraces with new tie wraps.
15.Reinstall the dust covers onto the bottom of the new crossbraces.
16.Reinstall the hex bolts, spacers, washers and locknuts thatsecurethe(2)pushbracketstothenew crossbraces and tighten securely.
17.Reinstall the hex bolts, washers and locknuts that se- cure the pivot links to the crossbraces and tighten se- curely.
18.Perform one (1) of the following:
FWD WHEELCHAIRS -
A.Unfold the battery tray. Refer to FOLDING BAT- TERY TRAY FOR USE in PROCEDURE 13 of this manual.
B.Reinstall the battery boxes onto the wheelchair. INSTALLING/REMOVING BATTERY BOXES in PROCEDURE 13 of this manual.
MWD WHEELCHAIRS -
A.Reinstall the battery tray onto the wheelchair. Re- fertoINSTALLING/REMOVINGBATTERYTRAY in PROCEDURE 14 of this manual.
B.Reinstall the battery boxes onto the wheelchair. INSTALLING/REMOVING BATTERY BOXES in PROCEDURE 14 of this manual.
19.Reinstall shrouds. Refer to REMOVING/INSTALLING SHROUDS in PROCEDURE 10 of this manual.
20.Reinstall the Captain's seat. Refer to REMOVING/IN- STALLING CAPTAIN'S SEAT in PROCEDURE 5 of the owner's manual, part number 1080722.
C R O S S B R A C E S
39
