PROCEDURE 11 | CROSSBRACES |
C R O S
MWD WHEELCHAIRS -
A.Reinstall the battery tray onto the wheelchair. Re- fertoINSTALLING/REMOVINGBATTERYTRAY in PROCEDURE 14 of this manual.
B.Reinstall the battery boxes onto the wheelchair. INSTALLING/REMOVING BATTERY BOXES in PROCEDURE 14 of this manual.
19.If necessary, reinstall the shrouds. Refer to REMOV- ING/INSTALLING SHROUDSin PROCEDURE 10 of this manual.
S B R A C E S
| Locknut | Crossbrace | |
Hex Bolt | (STEPS | ||
| |||
(STEPS | 7, 12) |
| |
4, 13) |
|
|
Locknut
(STEPS 4, 13)
Pivot Link |
|
Locknut (STEPS 4, 13) | Hex Bolts (STEPS 4, 13) |
|
Tie Wraps (STEPS 6, 14)
Wheelchair Frame
Washer (STEPS 7, 12)
Hex Bolts (STEPS 7, 12)
Black Dust Cover (STEPS 5, 15)
Pivot Tube Plug Pin (STEPS 9, 10)
DETAIL "B" - FWD WHEELCHAIRS | ||
RIGHT | ONLY | LEFT |
NOTE: Right and left is determined by sit- ting in the wheelchair.
DETAIL "A" - (STEPS 8, 11) |
| |
MWD WHEELCHAIRS | FWD WHEELCHAIRS | |
| Front of | Front of Wheelchair | |
Wheelchair | ||
|
Note orientation of hex bolt, washers, coved washers and locknut for installation of new crossbraces.
FIGURE 1 - ADJUSTING SEAT WIDTH - INTEGRATED SLING SEAT S
38
