Snapper 42" Single-Stage Snowthrower manual Belt Replacement

Belt Replacement

1.Move tension release lever to the released position (C, Figure 6).

2.Remove the belt from the snow thrower pulley (D, Figure 7).

3.Remove the belt from the machine.

4.Install the new belt as shown in Figure 7.

5.Move the belt tension lever to the locked position (B, Figure 6).

Troubleshooting, Adjustments, & Service

E

C

B

A

D

Figure 7. Belt Routing

A.V-Pulley

B.Idler Pulley

C.Electric Clutch Pulley (V-pulley)

D.Snow thrower Pulley (V-pulley)

E.Idler Pulley

13