ASSEMBLY
SInsert plastic probe supplied into right handle hole, from the inside of the handle. This will ensure wire harness will not be pinched or damaged while inserting carriage bolt. Figure 4.
SInsert carriage bolt from outside of right handle while removing plastic probe. Figure 5.
SInsert carriage bolt into left handle assembly.
SAssemble locknuts to carriage bolts and fasten securely with mini wrench supplied.
SThe Snowthrower, although assembled at the factory, should be checked over for any loose or damaged parts prior to initial use.
Plastic Probe
Inside Right
Handle
Figure 4
Plastic Probe
Figure 5
Carriage Bolt
| 5 |