Poulan 415136 owner manual Install Auger Control ROD See Figs, Check Tire Pressure

Page 6

ASSEMBLY / PRE-OPERATION

INSTALL AUGER CONTROL ROD (See Figs. 5 and 6)

The auger control rod has the short loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into control arm with loop opening up as shown.

2.With top end of rod positioned under right side of control panel, push down on rod and insert end of rod into hole in auger control bracket. Secure with retainer spring.

AUGER

CONTROL

ROD

RUBBER

SLEEVE

CONTROL

ARM

LOOP

OPENING

UP

FIG. 5

AUGER CONTROL ROD

AUGER

RETAINER

CONTROL

LEVER

SPRING

 

AUGER

CONTROL

BRACKET

FIG. 6

INSTALL DISCHARGE CHUTE / CHUTE ROTATER HEAD (See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotater head.

1.Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

2.Position chute rotater head over chute bracket. If neces- sary, rotate chute assembly toalign square and pin on un- derside of chute rotater head with holes in chute bracket.

3.With chute rotater head and chute bracket aligned, position chute rotater head on pin and threaded stud of mounting bracket.

4.Install 3/8 washer and locknut on threaded stud and tighten securely.

CHUTE

 

 

ROTATER

 

3/8 LOCKNUT

HEAD

 

 

 

 

3/8 WASHER

 

 

PIN

 

 

THREADED

 

 

STUD

 

ALIGN BEFORE

ROTATER HEAD

CHUTE

MOUNTING

BRACKET

TIGHTENING LOCKNUT

BRACKET

FIG. 7

CHECK TIRE PRESSURE

The tires on your snow thrower were overinflated at the fac- tory for shipping purposes. Correct and equal tire pressure is important for best snow throwing performance.

•Reduce tire pressure to 14-17 PSI (19-24.5 N-m).

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerRemove Snow Thrower from Carton Install Speed Control ROD See Figs Install Traction Drive Control ROD See FigsUnfold Upper Handle Install Auger Control ROD See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for startingDischarge chute control lever used to change the di HOW to USE Your Snow Thrower StoppingUsing the CLEAN-OUT Tool See Fig To Throw Snow See FigTo Move Forward and Backward See Fig Check Engine OIL Level See Fig Before Starting the EngineScraper BAR ADD Gasoline See FigSnow Throwing Tips Before StoppingIf Recoil Starter has Frozen Maintenance Cleaning EngineService and Adjustments To Adjust Snow Thrower HeightChute Deflector To Remove Wheels See Fig Storage OtherTroubleshooting Service Notes AIG plugr1 KEY Part Description 07Chute-knob2 414280 Knob, Lever Repair Parts Snow Thrower - Model NO. PR5524ES Handles 178899 17000616Repair Parts Snow Thrower - Model NO. PR5524ES Drive Repair Parts Snow Thrower - Model NO. PR5524ES Drive Page 416717X004 KEY Part Description17490408 413429X479Page 181037 Decal, Danger Limited Warranty

415136 specifications

The Poulan 415136 is a powerful and versatile chainsaw designed for both professional loggers and homeowners alike. Its robust design and advanced technology make it suitable for various cutting tasks, from felling trees to pruning and firewood preparation. With a focus on reliability and performance, the Poulan 415136 stands out in the competitive chainsaw market.

One of the key features of the Poulan 415136 is its powerful engine. Equipped with a high-performance gas engine, it offers impressive cutting speed and efficiency. The engine's reliability ensures that users can rely on it for extended periods without worrying about performance degradation. Its 40cc displacement provides a perfect balance between power and weight, making it easy to maneuver during operation.

The Poulan 415136 also features an automatic lubrication system that ensures the chain and bar remain well-lubricated during use. This technology not only extends the life of the chain and bar but also helps maintain consistent cutting performance. The adjustable oil flow allows users to customize the lubrication according to their specific cutting needs, making the chainsaw versatile for various tasks.

Another standout characteristic is its ergonomic design. The chainsaw is equipped with a comfortable handle that minimizes user fatigue, allowing for longer hours of usage without discomfort. The anti-vibration system further enhances the experience by reducing vibrations transmitted to the user, promoting smoother operation during cutting.

Safety is a crucial consideration for any chainsaw, and the Poulan 415136 does not disappoint. It features a chain brake that stops the chain almost immediately in case of kickback, protecting the user from potential accidents. Additionally, the chainsaw's safety latch prevents accidental starting, adding an extra layer of security during operation.

The Poulan 415136 is also designed for easy maintenance. Its tool-less chain tensioning system allows users to easily adjust the chain tension without the need for additional tools, saving time and effort during operation. This feature is particularly beneficial for users who require quick adjustments on the job site.

In summary, the Poulan 415136 is an outstanding chainsaw that combines power, efficiency, and user-friendly features. With its high-performance engine, automatic lubrication system, ergonomic design, and enhanced safety features, it is ideal for both professional users and homeowners looking to tackle their cutting tasks efficiently. Whether you are clearing fallen trees or maintaining your property, the Poulan 415136 is a reliable choice that delivers exceptional performance.
Top Page Image Contents