Poulan 415242 Snow Throwing Tips, To Start Engine, Before Stopping, If Recoil Starter has Frozen

Page 13

OPERATION

TO START ENGINE

•Be sure fuel shut-off valve is in the “OPEN” position. Your snow thrower engine is equipped with a recoil starter.

COLD START

1.Insert safety ignition key (packed separately in parts bag) into ignition slot until it clicks. DO NOT turn the key. Keep the extra safety ignition key in a safe place.

2.Place throttle control in “FAST” position.

3.Rotate choke control to “FULL” position.

4.Push the primer four (4) times if the temperature is below 15°F, or two (2) times if temperature is between 15° and 50°F. If temperature is above 50°F, priming is not necessary.

NOTE: Over priming may cause flooding, preventing the engine from starting. If you do flood the engine, wait a few minutes before attempting to start and DO NOT push the primer.

5.Pull recoil starter handle quickly. Do not allow starter rope to snap back.

6.When the engine starts, release the recoil starter handle and slowly move the choke control to the “OFF” posi- tion.

Allow the engine to warm up for a few minutes. Engine will not develop full power until it has reached normal operat- ing temperature.

WARM START

Follow the steps above, keeping the choke in the “OFF” position. DO NOT push the primer.

BEFORE STOPPING

Run the engine for a few minutes to help dry off any mois- ture on the engine.

IF RECOIL STARTER HAS FROZEN

If the recoil starter has frozen and will not turn the engine, proceed as follows:

1.Grasp the recoil starter handle and slowly pull as much rope out of the starter as possible.

2.Release the recoil starter handle and let it snap back against the starter.

If the engine still fails to start, repeat the above steps.

SNOW THROWING TIPS

•Always operate the snow thrower with the engine at full throttle. Full throttle offers the best performance.

•Go slower in deep, freezing or heavy wet snow. Use the drive speed control, NOT the throttle, to adjust speed.

•It is easier and more efficient to remove snow imme- diately after it falls.

•The best time to remove snow is the early morning. At this time the snow is usually dry and has not been ex- posed to the direct sun and warming temperatures.

•Slightly overlap each successive path to ensure all snow will be removed.

•Throw snow downwind whenever possible.

•Adjust the skid plates to proper height for current snow conditions. See “TO ADJUST SKID PLATES” in this section of this manual.

•For extremely heavy snow, reduce the width of snow removal by overlapping previous path and moving slowly.

•Keep engine clean and clear of snow during use. This will help air flow and extend engine life.

•After snow-throwing is completed, allow engine to run for a few minutes to melt snow and ice off the engine.

•Clean the entire snow thrower thoroughly after each use and wipe dry so it is ready for next use.

WARNING: Do not operate snow thrower if weather conditionsimpair vis- ibility. Throwing snow during a heavy, windy snowstorm can blind you and be hazardous to the safe operation of the snow thrower.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton HOW to SET UP Your Snow Thrower Assembly / PRE-OPERATIONRemove Snow Thrower from Carton Unfold Upper HandleInstall Auger Control ROD See Figs Install Traction Drive Control ROD See FigsInstall Chute Deflector Remote Control See Figs Install Discharge Chute / Chute Rotator Head See FigCheck Tire Pressure Know Your Snow Thrower OperationPrimer Ignition KEYMeets A.N.S.I. Safety Requirements Stopping HOW to USE Your Snow ThrowerTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigBefore Starting the Engine To Adjust Skid Plates See FigCheck Engine OIL Level See Fig ADD Gasoline See FigTo Start Engine Snow Throwing TipsBefore Stopping If Recoil Starter has FrozenMaintenance Engine CleaningTo Adjust Snow Thrower Height Service and AdjustmentsChute Deflector Shear Bolts See FigTo Replace Belts See Fig Storage Other TroubleshootingRepair Parts 405985X479 405986X479205 414280 Knob, Lever Handles Repair Parts Repair Parts Drive Repair Parts Page 416954 KEY Part Description417014X428 Wheels / Decals KEY Part Description Limited Warranty

415242 specifications

The Poulan 415242 is a versatile and powerful chainsaw designed for both casual users and experienced professionals. Known for its reliability and cutting performance, this chainsaw has become a popular choice among homeowners and small landowners who require efficient tools for yard maintenance and light to medium-duty tasks.

At the heart of the Poulan 415242 is its robust engine. The chainsaw features a 42cc two-stroke engine that delivers a considerable amount of power for tackling various cutting jobs. With a maximum speed of around 8,500 RPM, users can expect efficient performance whether they're trimming branches, felling trees, or cutting firewood. The engine's design allows for easy starts, thanks to the inclusion of a simplified starting system that reduces the number of pulls needed to ignite the engine.

One of the standout features of the Poulan 415242 is its low-vibration technology. This feature significantly reduces the amount of vibrations transferred to the operator, resulting in a more comfortable cutting experience, especially during extended use. Coupled with an ergonomic handle design, users can maintain a secure grip without experiencing excessive fatigue.

Safety is a critical aspect of chainsaw operation, and the Poulan 415242 incorporates several safety features. It includes a chain brake that automatically engages to stop the chain in the event of kickback, providing an added layer of protection to the user. Additionally, the chainsaw comes equipped with a throttle lockout, preventing accidental acceleration during operation.

Another innovative characteristic of the Poulan 415242 is its easy-access air filter and tool-less chain adjustment system. The accessible air filter simplifies maintenance, ensuring the chainsaw remains in optimal condition for performance. The tool-less chain adjustment allows users to quickly and easily adjust the chain tension as needed, promoting efficiency and productivity.

The Poulan 415242 is equipped with a 16-inch guide bar, making it suitable for a range of cutting applications. The size strikes an excellent balance between maneuverability and cutting power, allowing users to navigate tight spaces while efficiently handling larger logs.

With its combination of power, safety, and user-friendly features, the Poulan 415242 stands out as a reliable and effective tool for those in need of a dependable chainsaw. Whether for trimming, pruning, or felling, this chainsaw provides the performance and comfort needed for a variety of tasks. Users can tackle their projects with confidence, knowing they have a quality tool at their side.
Top Page Image Contents