Poulan 415242 owner manual Maintenance

Page 14

MAINTENANCE

GENERAL RECOMMENDATIONS

The warranty on this snow thrower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain snow thrower as instructed in this manual. Some adjust- ments will need to be made periodically to properly maintain your snow thrower. All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.

•Once a year, you should replace the spark plug and check belts for wear. A new spark plug will help your engine run better and last longer.

•Follow the maintenance schedule in this manual.

NOTE: Use only Original Equipment Manufacturer (OEM) parts to service this unit. Failure to do so can cause the unit to malfunction and pose a risk of injury to the operator.

BEFORE EACH USE

1.Check engine oil level.

2.Check for loose fasteners.

3.Check controls to be sure they are functioning properly.

LUBRICATION

Keep your snow thrower well lubricated (See “LUBRICATION CHART”).

LUBRICATION CHART

SAE 5W-30 Motor Oil

See “ENGINE” in Maintenance section

General

Purpose

Grease

Pivot points

Auger

 

grease fittings

Engine oil

SNOW THROWER

Always observe the safety rules when performing any maintenance.

TIRES

•Maintain proper air pressure in both tires (14–17 P.S.I. / 19-24.5 N-m).

•Keeptiresfreeofgasolineandoil,whichcanharmrubber.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

V-BELTS

Check V-belts for deterioration and wear after every 50 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. (See “TO REMOVE BELT COVER” in the Service and Adjustments section of this manual).

The V-belts on your snow thrower are of special construction and should be replaced by original equipment manufacturer (OEM) belts available from your nearest dealer. Using other than OEM belts can cause personal injury or damage to

14 the snow thrower.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Remove Snow Thrower from Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Unfold Upper HandleInstall Traction Drive Control ROD See Figs Install Auger Control ROD See FigsCheck Tire Pressure Install Discharge Chute / Chute Rotator Head See FigInstall Chute Deflector Remote Control See Figs Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements HOW to USE Your Snow Thrower StoppingUsing the CLEAN-OUT Tool See Fig To Move Forward and Backward See FigCheck Engine OIL Level See Fig To Adjust Skid Plates See FigBefore Starting the Engine ADD Gasoline See FigBefore Stopping Snow Throwing TipsTo Start Engine If Recoil Starter has FrozenMaintenance Cleaning EngineChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Shear Bolts See FigTo Replace Belts See Fig Storage Troubleshooting OtherRepair Parts 405986X479 405985X479205 414280 Knob, Lever Handles Repair Parts Repair Parts Drive Repair Parts Page 417014X428 KEY Part Description416954 Wheels / Decals KEY Part Description Limited Warranty

415242 specifications

The Poulan 415242 is a versatile and powerful chainsaw designed for both casual users and experienced professionals. Known for its reliability and cutting performance, this chainsaw has become a popular choice among homeowners and small landowners who require efficient tools for yard maintenance and light to medium-duty tasks.

At the heart of the Poulan 415242 is its robust engine. The chainsaw features a 42cc two-stroke engine that delivers a considerable amount of power for tackling various cutting jobs. With a maximum speed of around 8,500 RPM, users can expect efficient performance whether they're trimming branches, felling trees, or cutting firewood. The engine's design allows for easy starts, thanks to the inclusion of a simplified starting system that reduces the number of pulls needed to ignite the engine.

One of the standout features of the Poulan 415242 is its low-vibration technology. This feature significantly reduces the amount of vibrations transferred to the operator, resulting in a more comfortable cutting experience, especially during extended use. Coupled with an ergonomic handle design, users can maintain a secure grip without experiencing excessive fatigue.

Safety is a critical aspect of chainsaw operation, and the Poulan 415242 incorporates several safety features. It includes a chain brake that automatically engages to stop the chain in the event of kickback, providing an added layer of protection to the user. Additionally, the chainsaw comes equipped with a throttle lockout, preventing accidental acceleration during operation.

Another innovative characteristic of the Poulan 415242 is its easy-access air filter and tool-less chain adjustment system. The accessible air filter simplifies maintenance, ensuring the chainsaw remains in optimal condition for performance. The tool-less chain adjustment allows users to quickly and easily adjust the chain tension as needed, promoting efficiency and productivity.

The Poulan 415242 is equipped with a 16-inch guide bar, making it suitable for a range of cutting applications. The size strikes an excellent balance between maneuverability and cutting power, allowing users to navigate tight spaces while efficiently handling larger logs.

With its combination of power, safety, and user-friendly features, the Poulan 415242 stands out as a reliable and effective tool for those in need of a dependable chainsaw. Whether for trimming, pruning, or felling, this chainsaw provides the performance and comfort needed for a variety of tasks. Users can tackle their projects with confidence, knowing they have a quality tool at their side.
Top Page Image Contents