Poulan 199350 owner manual Table of Contents

Page 3

6.When cleaning, repairing or inspecting the snow thrower, stop the engine and make certain the collector/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the plug to prevent someone from accidentally starting the en- gine.

7.Do not run the engine indoors, except when starting the engine and for transporting the snow thrower in or out of the building. Open the outside doors; exhaust fumes are dangerous.

8.Exercise extreme caution when operating on slopes.

9.Never operate the snow thrower without proper guards, and other safety protective devices in place and work- ing.

10.Never direct the discharge toward people or areas where property damage can occur. Keep children and others away.

11.Do not overload the machine capacity by attempting to clear snow at too fast a rate.

12.Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when operating in reverse.

13.Disengage power to the collector/impeller when snow thrower is transported or not in use.

14.Use only attachments and accessories approved by the manufacturer of the snow thrower (such as wheel weights, counterweights, or cabs).

15.Never operate the snow thrower without good visibility or light. Always be sure of your footing, and keep a firm hold on the handles. Walk; never run.

16. Never touch a hot engine or muffler.

Clearing a Clogged Discharge Chute

Hand contact with the rotating impeller inside the discharge chute is the most common cause of injury associated with snow throwers. Never use your hand to clean out the dis- charge chute. To clear the chute:

1.SHUT THE ENGINE OFF!

2.Wait 10 seconds to be sure the impeller blades have stopped rotating.

3.Always use a clean-out tool, not your hands.

Maintenance and Storage

1.Check shear bolts and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

2.Never store the machine with fuel in the fuel tank inside a building where ignition sources are present such as hot water heaters, space heaters, or clothes dryers. Allow the engine to cool before storing in any enclosure.

3.Always refer to operator’s manual for important details if the snow thrower is to be stored for an extended period.

4.Maintain or replace safety and instruction labels, as necessary.

5.Run the machine a few minutes after throwing snow to prevent freeze-up of the collector/impeller.

CONGRATULATIONS on your purchase of a new snow thrower. Ithasbeendesigned,engineeredandmanufactured to give best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center. We have competent, well-trained technicians and the proper tools to service or repair this unit.

Please read and retain this manual. The instructions will enable you to assemble and maintain your snow thrower properly. Always observe the “SAFETY RULES”.

SERIAL NUMBER: ___________________________

DATE OF PURCHASE: _______________________

THE MODELAND SERIAL NUMBERS WILL BE FOUND ONADECALATTACHED TO THE REAR OF THE SNOW THROWER HOUSING.

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

PRODUCT SPECIFICATIONS

Gasoline Capacity

2.0 Quarts (2,27 Liters)

and Type:

 

Unleaded Regular only

 

 

Oil Type

SAE 30 (above 40°F)

(API SG–SL):

SAE 5W-30 or 10W-30 (0° to +40°F)

 

SAE 0W-30 (below 0°F)

 

 

Oil Capacity:

21 Ounces (0,6 Liters)

 

 

Spark Plug:

Champion RJ19LM

Gap:

0.030" (0,762 mm)

 

 

 

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your snow thrower.

•Follow the instructions under “Maintenance” and “Stor- age” sections of this owner’s manual.

TABLE OF CONTENTS

SAFETY RULES

2-3

PRODUCT SPECIFICATIONS

3

CUSTOMER RESPONSIBILITIES

3

WARRANTY

32

ASSEMBLY / PRE-OPERATION

4-6

OPERATION

7-12

MAINTENANCE

13-14

MAINTENANCE SCHEDULE

13

SERVICE AND ADJUSTMENTS

15-17

STORAGE

17

TROUBLESHOOTING

18

3 REPAIR PARTS

20-31

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerRemove Snow Thrower from Carton Install Speed Control ROD See Figs Install Traction Drive Control ROD See FigsUnfold Upper Handle Install Auger Control ROD See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Ignition KEY OperationKnow Your Snow Thrower PrimerMeets A.N.S.I. Safety Requirements Stopping HOW to USE Your Snow ThrowerStopped. Disconnect the spark plug wire When traction drive control lever is engagedUsing the CLEAN-OUT Tool See Fig When cleaning, repairing, or inspecting, makeBefore Starting the Engine Scraper BARTo Start Engine If Recoil Starter has Frozen Snow Throwing TipsWarm Start Before StoppingMaintenance Engine CleaningService and Adjustments To Adjust Snow Thrower HeightChute Deflector To Remove Wheels See Fig Other StorageTroubleshooting Service Notes Limited Warranty

199350 specifications

The Poulan 199350 is a remarkable chainsaw designed for both amateur enthusiasts and professional users who require reliability and power for various cutting tasks. This model is known for its robust performance, making it a popular choice for homeowners and professionals alike.

One of the key features of the Poulan 199350 is its potent 50cc gas engine, which delivers impressive cutting power. This engine is engineered to provide high torque, allowing it to easily cut through thick branches and even small trees. The balanced design of the chainsaw ensures that users can maneuver it effortlessly, reducing fatigue during extended use.

A standout characteristic of the Poulan 199350 is its efficient air filtration system. This innovative feature helps to prolong the life of the engine by keeping dirt and debris from entering critical components. The air filter is easy to access and clean, which is vital for maintaining optimal performance and reliability over time.

In terms of safety, the Poulan 199350 is equipped with a chain brake system that provides an added layer of protection against kickback. This safety feature ensures that the chain stops quickly in the event of unexpected movement, giving users peace of mind while operating the saw. Additionally, the chainsaw has a low kickback chain that further minimizes the chances of accidents.

The Poulan 199350 also boasts an automatic oiler that maintains the chain's lubrication, which is crucial for smooth operation and reduced wear. This convenience allows users to focus on their cutting tasks without the hassle of manual lubrication.

Another significant advantage of the Poulan 199350 is its lightweight design, which enhances portability and ease of use. Weighing around 12 pounds, this chainsaw is easy to transport and handle, making it suitable for a variety of outdoor projects, from trimming and pruning to felling small trees.

Moreover, its tool-less chain tensioning feature allows for quick adjustments, ensuring that the chain remains at the ideal tension at all times. This attribute is particularly beneficial for users who require quick setup and operation while on the job.

In conclusion, the Poulan 199350 stands out in the chainsaw market due to its powerful engine, advanced safety features, efficient air filtration, and user-friendly design. Whether for home maintenance or professional landscaping, this chainsaw delivers exceptional performance and reliability, making it an excellent investment for anyone in need of a quality cutting tool.
Top Page Image Contents