Poulan 199350 owner manual Install Auger Control ROD See Figs, Check Tire Pressure

Page 6

ASSEMBLY / PRE-OPERATION

INSTALL AUGER CONTROL ROD (See Figs. 5 and 6)

The auger control rod has the short loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into control arm with loop opening up as shown.

2.With top end of rod positioned under right side of control panel, push down on rod and insert end of rod into hole in auger control bracket. Secure with retainer spring.

AUGER

CONTROL

ROD

RUBBER

SLEEVE

CONTROL

ARM

LOOP

OPENING

UP

FIG. 5

AUGER CONTROL ROD

AUGER

RETAINER

CONTROL

LEVER

SPRING

 

AUGER

CONTROL

BRACKET

FIG. 6

INSTALL DISCHARGE CHUTE / CHUTE ROTATER HEAD (See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotater head.

1.Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

2.Position chute rotater head over chute bracket. If neces- sary, rotate chute assembly to align square and pin on un- derside of chute rotater head with holes in chute bracket.

3.With chute rotater head and chute bracket aligned, position chute rotater head on pin and threaded stud of mounting bracket.

4.Install 3/8 washer and locknut on threaded stud and tighten securely.

CHUTE

 

 

ROTATER

 

3/8 LOCKNUT

HEAD

 

 

 

 

3/8 WASHER

 

 

PIN

 

 

THREADED

 

 

STUD

 

ALIGN BEFORE

ROTATER HEAD

CHUTE

MOUNTING

BRACKET

TIGHTENING LOCKNUT

BRACKET

FIG. 7

CHECK TIRE PRESSURE

The tires on your snow thrower were overinflated at the fac- tory for shipping purposes. Correct and equal tire pressure is important for best snow throwing performance.

•Reduce tire pressure to 14–17 PSI.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerRemove Snow Thrower from Carton Install Speed Control ROD See Figs Install Traction Drive Control ROD See FigsUnfold Upper Handle Install Auger Control ROD See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements HOW to USE Your Snow Thrower StoppingWhen cleaning, repairing, or inspecting, make When traction drive control lever is engagedUsing the CLEAN-OUT Tool See Fig Stopped. Disconnect the spark plug wireBefore Starting the Engine Scraper BARTo Start Engine Before Stopping Snow Throwing TipsWarm Start If Recoil Starter has FrozenMaintenance Cleaning EngineService and Adjustments To Adjust Snow Thrower HeightChute Deflector To Remove Wheels See Fig Storage OtherTroubleshooting Service Notes Limited Warranty

199350 specifications

The Poulan 199350 is a remarkable chainsaw designed for both amateur enthusiasts and professional users who require reliability and power for various cutting tasks. This model is known for its robust performance, making it a popular choice for homeowners and professionals alike.

One of the key features of the Poulan 199350 is its potent 50cc gas engine, which delivers impressive cutting power. This engine is engineered to provide high torque, allowing it to easily cut through thick branches and even small trees. The balanced design of the chainsaw ensures that users can maneuver it effortlessly, reducing fatigue during extended use.

A standout characteristic of the Poulan 199350 is its efficient air filtration system. This innovative feature helps to prolong the life of the engine by keeping dirt and debris from entering critical components. The air filter is easy to access and clean, which is vital for maintaining optimal performance and reliability over time.

In terms of safety, the Poulan 199350 is equipped with a chain brake system that provides an added layer of protection against kickback. This safety feature ensures that the chain stops quickly in the event of unexpected movement, giving users peace of mind while operating the saw. Additionally, the chainsaw has a low kickback chain that further minimizes the chances of accidents.

The Poulan 199350 also boasts an automatic oiler that maintains the chain's lubrication, which is crucial for smooth operation and reduced wear. This convenience allows users to focus on their cutting tasks without the hassle of manual lubrication.

Another significant advantage of the Poulan 199350 is its lightweight design, which enhances portability and ease of use. Weighing around 12 pounds, this chainsaw is easy to transport and handle, making it suitable for a variety of outdoor projects, from trimming and pruning to felling small trees.

Moreover, its tool-less chain tensioning feature allows for quick adjustments, ensuring that the chain remains at the ideal tension at all times. This attribute is particularly beneficial for users who require quick setup and operation while on the job.

In conclusion, the Poulan 199350 stands out in the chainsaw market due to its powerful engine, advanced safety features, efficient air filtration, and user-friendly design. Whether for home maintenance or professional landscaping, this chainsaw delivers exceptional performance and reliability, making it an excellent investment for anyone in need of a quality cutting tool.
Top Page Image Contents