Poulan 414741 Assembly / PRE-OPERATION, Remove Snow Thrower from Carton, Unfold Upper Handle

Page 5

ASSEMBLY / PRE-OPERATION

Read these instructions and this manual in its entirety before you attempt to assemble or operate your new snow thrower. Reading the entire manual will familiar- ize you with the unit, which will assist you in assembly, operation and maintenance of the product.

Your new snow thrower has been assembled at the factory with the exception of those parts left unassembled for ship- ping purposes. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts bag. To ensure safe and proper operation of your snow thrower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.

REMOVE SNOW THROWER FROM CARTON

1.Remove all accessible loose parts and parts boxes from carton.

2.Cut down all four corners of carton and lay panels flat.

3.Remove the two (2) screws securing the auger housing to the pallet.

4.Remove all packing materials except plastic tie holding speed control rod to lower handle.

5.Remove the two (2) plastic ties securing the upper handle to the pallet.

6.Remove snow thrower from carton and check carton thoroughly for additional loose parts.

HOW TO SET UP YOUR SNOW THROWER

TOOL BOX (See Fig. 10)

A toolbox is provided on your snow thrower. The toolbox is located on top of the belt cover. Store the extra shear bolts, nuts and multi-wrench provided in parts bag in the toolbox.

NOTE: The multi-wrench may be used for assembly of the chute rotator head to snow thrower and making adjustments to the skid plates.

UNFOLD UPPER HANDLE

1.Raise upper handle to the operating position and tighten handle knobs securely.

INSTALL SPEED CONTROL ROD (See Figs. 1 and 2)

1.Remove plastic tie securing rod to lower handle.

2.Insert rod into speed control bracket and secure with retainer spring.

SPEED

CONTROL

ROD

PLASTIC TIE

UPPER

HANDLE

HANDLE

KNOB

LOWER

HANDLE

FIG. 1

SPEED CONTROL ROD

RETAINER

SPRING

SPEED SPEED

CONTROL CONTROL

BRACKET LEVER

FIG. 2

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton HOW to SET UP Your Snow Thrower Assembly / PRE-OPERATIONRemove Snow Thrower from Carton Unfold Upper HandleInstall Auger Control ROD See Figs Install Traction Drive Control ROD See FigsCheck Tire Pressure Install Discharge Chute / Chute Rotator Head See FigInstall Chute Deflector Remote Control See Figs Know Your Snow Thrower OperationPrimer Ignition KEYDeflector remote control lever used to change Meets A.N.S.I. Safety RequirementsStopping HOW to USE Your Snow ThrowerPower Steering Operation See Fig Using the CLEAN-OUT Tool See FigTo Adjust Skid Plates See Fig To Throw Snow See FigScraper BAR Before Starting the EngineCheck Engine OIL Level See Fig ADD Gasoline See FigTo Start Engine Snow Throwing TipsBefore Stopping If Recoil Starter has FrozenMaintenance Engine CleaningChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Remove the klik pin and remove wheel from axle To Remove Wheels See FigOther StorageTroubleshooting 2220 KEY Part Description Page 414280 Knob, Lever Repair Parts Snow Thrower Model PP11530ES Handles Repair Parts Snow Thrower Model PP11530ES Handles Repair Parts Drive Repair Parts Snow Thrower Model PP11530ES Drive Page 417014X428 KEY Part DescriptionRepair Parts Snow Thrower Model PP11530ES Wheels / Decals Repair Parts Limited Warranty

414741 specifications

The Poulan 414741 is a versatile and powerful chainsaw designed to meet the needs of both seasoned professionals and occasional users. With a blend of innovation, durability, and user-friendly features, this model stands out in the competitive market of handheld power tools.

One of the defining characteristics of the Poulan 414741 is its robust engine. Equipped with a reliable 40cc two-stroke engine, this chainsaw delivers impressive power that allows it to tackle a variety of cutting tasks, from trimming branches to felling medium-sized trees. The engine is designed for high performance while still ensuring fuel efficiency, making it an economical choice for users who require a balance between power and runtime.

A key feature of the Poulan 414741 is its LowVib technology, which significantly reduces vibration levels during operation. This innovation allows users to work longer without discomfort, providing a more pleasant cutting experience. The chainsaw is designed with an ergonomic handle that aids in maintaining a secure grip, further enhancing user comfort and control.

The Poulan 414741 also incorporates an automatic chain oiler system that ensures consistent lubrication of the chain and bar, promoting a longer lifespan and optimal cutting performance. This feature minimizes the need for manual intervention, allowing users to focus on their tasks without interruption. Additionally, the easy-access air filter and spark plug ensure straightforward maintenance, making it simple for owners to keep their chainsaw in peak condition.

Safety is a priority in the design of the Poulan 414741. The chainsaw comes equipped with a chain brake that engages immediately in the event of kickback, preventing potential accidents. A hand guard also provides added protection to the user's hands from debris and chainsaw kickback.

Weighing in at a manageable size, the Poulan 414741 is easy to maneuver during operation, making it suitable for various cutting jobs, including landscaping, firewood preparation, and even rugged outdoor projects. Whether you’re an avid gardener or a professional logger, this model’s combination of power, comfort, and safety features makes it an excellent choice for anyone in need of a reliable chainsaw.

In conclusion, the Poulan 414741 exemplifies effectiveness and reliability in cutting tools, offering users a high-quality, easy-to-use chainsaw loaded with modern technology and features.
Top Page Image Contents