Poulan 414639 owner manual Maintenance

Page 14

MAINTENANCE

GENERAL RECOMMENDATIONS

The warranty on this snow thrower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain snow thrower as instructed in this manual. Some adjust- ments will need to be made periodically to properly maintain your snow thrower. All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.

•Once a year, you should replace the spark plug and check belts for wear. A new spark plug will help your engine run better and last longer.

•Follow the maintenance schedule in this manual.

NOTE: Use only Original Equipment Manufacturer (OEM) parts to service this unit. Failure to do so can cause the unit to malfunction and pose a risk of injury to the operator.

BEFORE EACH USE

1.Check engine oil level.

2.Check for loose fasteners.

3.Check controls to be sure they are functioning properly.

LUBRICATION

Keep your snow thrower well lubricated (See “LUBRICATION CHART”).

LUBRICATION CHART

SAE 5W-30 Motor Oil

See “ENGINE” in Maintenance section

General

Purpose

Grease

Pivot points

Auger

 

grease fittings

Engine oil

SNOW THROWER

Always observe the safety rules when performing any maintenance.

TIRES

•Maintain proper air pressure in both tires (14–17 P.S.I. / 19-24.5 N-m).

•Keeptiresfreeofgasolineandoil,whichcanharmrubber.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

V-BELTS

Check V-belts for deterioration and wear after every 50 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. (See “TO REMOVE BELT COVER” in the Service and Adjustments section of this manual).

The V-belts on your snow thrower are of special construction and should be replaced by original equipment manufacturer (OEM) belts available from your nearest dealer. Using other than OEM belts can cause personal injury or damage to

14 the snow thrower.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Remove Snow Thrower from Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Unfold Upper HandleInstall Traction Drive Control ROD See Figs Install Auger Control ROD See FigsCheck Tire Pressure Install Discharge Chute / Chute Rotator Head See FigInstall Chute Deflector Remote Control See Figs Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements HOW to USE Your Snow Thrower StoppingUsing the CLEAN-OUT Tool See Fig To Move Forward and Backward See FigCheck Engine OIL Level See Fig To Adjust Skid Plates See FigBefore Starting the Engine ADD Gasoline See FigBefore Stopping Snow Throwing TipsTo Start Engine If Recoil Starter has FrozenMaintenance Cleaning EngineChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Shear Bolts See FigTo Replace Belts See Fig Storage Troubleshooting OtherRepair Parts KEY Part Description 205 414280 Knob, Lever Handles Repair Parts Repair Parts Drive Repair Parts Page KEY Part Description 417014X428Wheels / Decals KEY Part Description Limited Warranty

414639 specifications

The Poulan 414639 is a robust and efficient chainsaw designed for both professional arborists and homeowners alike. Known for its reliable performance and ease of use, this model has gained popularity among individuals who need a dependable tool for cutting firewood, trimming trees, or tackling larger landscaping projects.

One of the main features of the Poulan 414639 is its powerful engine. Equipped with a 42cc two-stroke engine, this chainsaw delivers the right amount of power to handle challenging cutting tasks. The engine operates efficiently, providing a seamless cutting experience while minimizing fuel consumption. This feature is especially beneficial for users who need to work for extended periods without frequent refueling.

The chainsaw comes with a 16-inch guide bar and low-profile chain, making it versatile for different cutting applications. Whether users are making fast cuts in smaller trees or pruning larger branches, the Poulan 414639 is designed to deliver smooth and efficient results. The low profile contributes to reduced kickback and enhances safety when operating the saw.

Another key characteristic of the Poulan 414639 is its user-friendly design. The lightweight construction allows for extended use without causing unnecessary fatigue, making it suitable for both novice and experienced users. Additionally, the ergonomic handle is designed for comfort, providing a secure grip that enhances control during operation.

Safety features are also a priority in this model. The chainsaw is equipped with a chain brake for instant stopping in case of kickback, ensuring the operator's safety. The saw also features an inertia-activated chain brake that engages automatically when it detects sudden changes in motion, adding an extra layer of protection.

Poulan incorporates advanced technologies into the 414639 model to improve performance and maintenance. The Easy Start system ensures that starting the chainsaw is hassle-free, reducing the effort required to get it running. This technology is particularly valuable for those who may struggle with traditional pull-start mechanisms. Furthermore, the tool-less chain tensioning system allows users to adjust the chain’s tension quickly and easily, ensuring optimal performance at all times.

In conclusion, the Poulan 414639 is an excellent chainsaw that combines power, safety, and user-friendly features. With its reliable performance and thoughtful design, it caters to the needs of both casual users and professionals, making it a valuable addition to anyone's toolkit. Whether tackling small projects or larger jobs, the Poulan 414639 is a lightweight, efficient, and dependable choice for tackling a variety of cutting tasks.
Top Page Image Contents