Simplicity 1692244, 1692243 manual Installation, Tractor Preparation, Flow Reduction Washer

Page 10

INSTALLATION

Tractor Preparation

1.Increase the front tire pressure to 20 PSI for use with snowthrower.

2.On tractors with Kohler Magnum engines, loosen the air cleaner cover wing nut, pull intake hose out of plenum hole and rotate cover slightly. For winter operation only, this allows warmer air to be taken in through the air cleaner. This is not necessary for Kohler Command engines.

Flow Reduction Washer

A washer is provided which must be added to the hydrau- lic valve. The purpose of the washer is to increase travel time when the snowthrower is lowered. This washer has an i/2’ O.D. and a hole in the middle slightly smaller than i/16” I.D.

1.Remove the upper left-hand panel from the tractor to expose the valve (A, figure 1).

2.Notice there are two elbows on the side. Disconnect the hose (B) from the front elbow (C). Remove the elbow.

3.Place the washer so it is fully seated inthe hole.

4:Reinstall the elbow (C) and then connect the hose (B). Tighten the nut securely after elbow is properly positioned.

Note: Flow reduction washer can be left installed in hydraulic valve for use with mower and other attachments.

Figure 1. Flow Reduction Washer

A. Valve

8. Hose

C. Front Elbow

Chute Rotator Bracket

Install the chute rotator bracket (A, figure 2) as follows:

1.Remove top front capscrew (B), lo&washer, and nut from the tractor. Retain hardware for reassembly.

2.Remove the bottom bolt (C) and discard. Retain the flange nut for reassembly.

3.Insert the bracket (A) between the tractor frame and footrest. Secure with existing hardware in the top front location, At the bottom hole, install 3/8-16x i-1/2” capscrew and flat washer from outside the frame, with a second flat washer placed between the rotator bracket and footrest bracket. Capscrew and flat washers are supplied in kit hardware bag. Secure with the existing flange nut.

4.Tighten all hardware.

Chute Rotator Bracket

Top Capscrew

C. Bottom Capscrew

6

Page 9 Page 11
Image 10
Page 9 Page 11
Contents OPERATOR’S Manual Mfg . NoStandard Fastener Identification Chart NUT9118-12 Simplicity MANUFACTURING, INC Table of Contents Safe Operation Practices and Precautions Safety RulesSafe Operation of Snowthrower Safe Maintenance and Storage Safety Decals Parts Identification Flow Reduction Washer InstallationTractor Preparation Chute Rotator BracketInstall Discharge Chute Lift RodInstall PTO Driveshafl Mounting HitchPivot Plate Lock Checks Prior to Using Skid Shoe AdjustmentDischarge Spout Adjustment Transport Height AdjustmentSnowthrower Removal Using SnowthrowerHitch Removal Maintenance & Storage Requirements MaintenanceShear bolts Inspecting Cutting EdgeReversing Cutting Edge StorageTroubleshooting Problem Corrective Cause ActionSpecifications Drift Cutter KIT, MFG. no

1692243, 1692244 specifications

Simplicity 1692243 and 1692244 are innovative products designed to enhance user experience through advanced technologies and thoughtful features. These models embody the principles of simplicity and efficiency, making them ideal for both casual and professional environments.

One of the standout characteristics of Simplicity 1692243 and 1692244 is their sleek design. The streamlined profile and modern aesthetic make them visually appealing, while also ensuring that they fit seamlessly into any setting. The use of high-quality materials contributes to a premium feel and ensures durability, enabling them to withstand daily wear and tear.

When it comes to functionality, both models boast a host of smart features that cater to today's tech-savvy users. A key aspect is their user-friendly interface. Designed with simplicity in mind, the intuitive controls allow for quick navigation and seamless interaction. Users will appreciate the responsive touchscreens, which provide instant feedback and make operation effortless.

In terms of connectivity, Simplicity 1692243 and 1692244 support a variety of wireless options, including Bluetooth and Wi-Fi. This versatility enables users to easily connect to other devices, stream content, and access a wide range of applications without the hassle of tangled wires. The models are also compatible with popular smart home systems, allowing for integration into existing setups for additional convenience.

Both units come equipped with advanced performance technologies that ensure optimal functionality. These include energy-efficient components and enhanced processing capabilities. This means not only can users rely on consistent performance, but they can also enjoy longer usage times without frequent recharging, thanks to smart battery management systems.

Another notable feature is the emphasis on security. Simplicity 1692243 and 1692244 incorporate advanced encryption technologies and secure access protocols, ensuring that user data remains protected from potential threats. This focus on security demonstrates a commitment to user privacy and peace of mind.

In conclusion, Simplicity 1692243 and 1692244 represent a blend of modern design, smart technology, and user-centric features. With their high-quality construction, intuitive interfaces, robust connectivity options, and strong emphasis on security, these models stand out as reliable solutions for anyone seeking simplicity without sacrificing functionality. Whether for personal use or professional applications, they are set to enhance everyday experiences, making tasks not only easier but also more enjoyable.
Top Page Image Contents