Simplicity 1692243, 1692244 manual Pivot Plate Lock

Page 13

Mounting Snowthrower

Note: The auger blades are shipped in identical position for shipping purposes. Remove either left or right hand shear bolt (refer to figure 18 on page 14) then turn one auger 180” and reinstall shear bolt.

1.Park tractor on hard level surface.

2.Stop engine, lock parking brake and remove key.

3.Place snowthrower’s shot pins (A, figure 7) in released position (shot pins shown in figure 7 are in locked position).

4.Make sure that PTO shaft is held in supporting rod. This is done to prevent PTO shaft from interfering with connection point and to help align the shaft for hookup.

5.See figure 8. Check that pivot plate is locked into straight forward position. Do not use any of the angle positions with the snowthrower. To lock pivot plate, push pin (A) down and turn until roll pin (B) fits securely into groove.

MOTE: An/e positions ofpivot plate.,aie used with other attachments.

6.See figure 7. From the tractor seat, start tractor and slowly drive toward snowthrower, while aligning pivot plate (B) with back adapter plate (C) of snowthrower.

7.When tractor is approximately one foot away from snowthrower, stop tractor and lower hitch so it is positioned just above the ground (i/4 to i/2 inch off the ground).

8.See figure 7. Slowly drive toward snowthrower until pivot plate (B) makes contact with back plate (C) of snowthrower.

9.Bring tractor to stop and slowly raise hitch until top lip of pivot plate slides into groove of back plate and shot pins (A) slide into place.

10.Stop engine, lock parking brake and remove key.

11.Check that snowthrower’s shot pins are fully seated into pivot plate. If pins are not yet seated, seat pins.

12.Return PTO support rod to retaining hook.

13.Attach snowthrower PTO coupling to tractor PTO shaft.

a.Pull outer ring (A, figure 9) of PTO shaft back.

b.Slide PTO coupling onto spline shaft of tractor, pushing coupling foward when splines are aligned.

c.Release outer ring, ensuring ring snaps forward, locking PTO into place.

MAKE SURE PIVOT

PLATE IS SEATED

Figure 7. Mounting Snowthrower

A. Shot Pins

C. Adaptor Plate

B. Pivot Plate

 

 

 

 

 

Figure 8. Pivot Plate Lock

A. Lock Pin

B. Roll Pin

Figure 9. Installing PTO Driveshaft (Tractor Side)

A. Outer (Locking) Ring

9

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Mfg . No OPERATOR’S ManualNUT Standard Fastener Identification Chart9118-12 Simplicity MANUFACTURING, INC Table of Contents Safe Operation Practices and Precautions Safety RulesSafe Operation of Snowthrower Safe Maintenance and Storage Safety Decals Parts Identification Tractor Preparation InstallationFlow Reduction Washer Chute Rotator BracketLift Rod Install Discharge ChuteMounting Hitch Install PTO DriveshaflPivot Plate Lock Skid Shoe Adjustment Checks Prior to UsingTransport Height Adjustment Discharge Spout AdjustmentSnowthrower Removal Using SnowthrowerHitch Removal Maintenance Maintenance & Storage RequirementsReversing Cutting Edge Inspecting Cutting EdgeShear bolts StorageProblem Corrective Cause Action TroubleshootingDrift Cutter KIT, MFG. no Specifications

1692243, 1692244 specifications

Simplicity 1692243 and 1692244 are innovative products designed to enhance user experience through advanced technologies and thoughtful features. These models embody the principles of simplicity and efficiency, making them ideal for both casual and professional environments.

One of the standout characteristics of Simplicity 1692243 and 1692244 is their sleek design. The streamlined profile and modern aesthetic make them visually appealing, while also ensuring that they fit seamlessly into any setting. The use of high-quality materials contributes to a premium feel and ensures durability, enabling them to withstand daily wear and tear.

When it comes to functionality, both models boast a host of smart features that cater to today's tech-savvy users. A key aspect is their user-friendly interface. Designed with simplicity in mind, the intuitive controls allow for quick navigation and seamless interaction. Users will appreciate the responsive touchscreens, which provide instant feedback and make operation effortless.

In terms of connectivity, Simplicity 1692243 and 1692244 support a variety of wireless options, including Bluetooth and Wi-Fi. This versatility enables users to easily connect to other devices, stream content, and access a wide range of applications without the hassle of tangled wires. The models are also compatible with popular smart home systems, allowing for integration into existing setups for additional convenience.

Both units come equipped with advanced performance technologies that ensure optimal functionality. These include energy-efficient components and enhanced processing capabilities. This means not only can users rely on consistent performance, but they can also enjoy longer usage times without frequent recharging, thanks to smart battery management systems.

Another notable feature is the emphasis on security. Simplicity 1692243 and 1692244 incorporate advanced encryption technologies and secure access protocols, ensuring that user data remains protected from potential threats. This focus on security demonstrates a commitment to user privacy and peace of mind.

In conclusion, Simplicity 1692243 and 1692244 represent a blend of modern design, smart technology, and user-centric features. With their high-quality construction, intuitive interfaces, robust connectivity options, and strong emphasis on security, these models stand out as reliable solutions for anyone seeking simplicity without sacrificing functionality. Whether for personal use or professional applications, they are set to enhance everyday experiences, making tasks not only easier but also more enjoyable.
Top Page Image Contents