Simplicity 1692244, 1692243 manual Mounting Hitch, Install PTO Driveshafl

Page 12

Mounting Hitch

1.Park tractor on a hard level surface.

2.Stop engine, lock parking brake, and remove key.

3.Place hitch on ground in front of tractor with pivot plate facing away from tractor.

4.Rotate the hitch attaching links rearward toward the tractor.

5.Install the back of hitch so that hitch pins (A, figure 5) are cradled in tractor hitch bracket (B). The lift rod front clevis must be positioned over the hitch lift arm while raising hitch into position.

6.From inside hitch, install the left and right clevis pins (C)through attaching links and tractor hitch bracket

(B). Secure with spring clips (D).

7.Align the holes in the lift rod front clevis and tractor lift arm (may have to lift up on front hitch slightly). To avoid interference, install the clevis pin (E) from inside (flat head towards PTO belts). Secure the clevis pin with spring clip on outside of lift arm clevis.

8.Check the “Transport Height Adjustment” procedure on page 11 before snowthrower is installed.

Figure 5. Mounting Hitch

A. Hitch Pins

B. Tractor Hitch Bracket

C. Clevis Pin

D. Spring Clip (Hitch)

E. Clevis Pin

Install PTO Driveshafl

1.Install l/4” x 1” square key in keyway.

2.Install driveshaft (A, figure 6) with setscrew over key.

3.Secure the driveshaft with l/4-20 x 1 7/8”capscrew (Grade 5) and i/4-20 locknut at location B.

NOTE: 1/4-20x l-7/8 capscrew supplied in kit hard- ware bag has been ground to exact/y l-7/8 length for use in this step.

4.Rotate the PTO driveshaft and check clearance with the flat bearing boss just underneath. Peen end of capscrew to prevent locknut from backing off.

5.Tighten the setscrew over key with 3/16” allen wrench.

6.Release the PTO support rod (C) from retaining hook

(D) and support driveshaft with rod.

Figure 6. Installing PTO Drvieshaft

 

(Snowthrower Side)

 

A. Driveshaft

 

B. Capscrew Location

 

C. PTO Support Rod

 

D. Retaining Hook

 

(Note: Hydraulic chute rotator model shown in photo.)

8

Page 11 Page 13
Image 12
Page 11 Page 13
Contents OPERATOR’S Manual Mfg . NoStandard Fastener Identification Chart NUT9118-12 Simplicity MANUFACTURING, INC Table of Contents Safety Rules Safe Operation Practices and PrecautionsSafe Operation of Snowthrower Safe Maintenance and Storage Safety Decals Parts Identification Installation Tractor PreparationFlow Reduction Washer Chute Rotator BracketInstall Discharge Chute Lift RodInstall PTO Driveshafl Mounting HitchPivot Plate Lock Checks Prior to Using Skid Shoe AdjustmentDischarge Spout Adjustment Transport Height AdjustmentUsing Snowthrower Snowthrower RemovalHitch Removal Maintenance & Storage Requirements MaintenanceInspecting Cutting Edge Reversing Cutting EdgeShear bolts StorageTroubleshooting Problem Corrective Cause ActionSpecifications Drift Cutter KIT, MFG. no

1692243, 1692244 specifications

Simplicity 1692243 and 1692244 are innovative products designed to enhance user experience through advanced technologies and thoughtful features. These models embody the principles of simplicity and efficiency, making them ideal for both casual and professional environments.

One of the standout characteristics of Simplicity 1692243 and 1692244 is their sleek design. The streamlined profile and modern aesthetic make them visually appealing, while also ensuring that they fit seamlessly into any setting. The use of high-quality materials contributes to a premium feel and ensures durability, enabling them to withstand daily wear and tear.

When it comes to functionality, both models boast a host of smart features that cater to today's tech-savvy users. A key aspect is their user-friendly interface. Designed with simplicity in mind, the intuitive controls allow for quick navigation and seamless interaction. Users will appreciate the responsive touchscreens, which provide instant feedback and make operation effortless.

In terms of connectivity, Simplicity 1692243 and 1692244 support a variety of wireless options, including Bluetooth and Wi-Fi. This versatility enables users to easily connect to other devices, stream content, and access a wide range of applications without the hassle of tangled wires. The models are also compatible with popular smart home systems, allowing for integration into existing setups for additional convenience.

Both units come equipped with advanced performance technologies that ensure optimal functionality. These include energy-efficient components and enhanced processing capabilities. This means not only can users rely on consistent performance, but they can also enjoy longer usage times without frequent recharging, thanks to smart battery management systems.

Another notable feature is the emphasis on security. Simplicity 1692243 and 1692244 incorporate advanced encryption technologies and secure access protocols, ensuring that user data remains protected from potential threats. This focus on security demonstrates a commitment to user privacy and peace of mind.

In conclusion, Simplicity 1692243 and 1692244 represent a blend of modern design, smart technology, and user-centric features. With their high-quality construction, intuitive interfaces, robust connectivity options, and strong emphasis on security, these models stand out as reliable solutions for anyone seeking simplicity without sacrificing functionality. Whether for personal use or professional applications, they are set to enhance everyday experiences, making tasks not only easier but also more enjoyable.
Top Page Image Contents