Ope At O

....

KNOW YOUR SNOW THROWER,

READ THIS OWNER'S MANUALAND SAFETY RULES BEFORE OPERATING YOUR SNOW

THROWER. Compare the illustrations with your snow thrower to familiarize yourself with the location oi various controls and adjustments. Save this manual for future reference

AUGER CLUTCH

TRACTION

LEVER

.CLUTCHLEVER

SHIFT ROD LEVER

CHUTE DEFLECTOR

WEIGHT

CRANK

ASSEMBLY

BUTTON

DISCHARGE

CHUTE

TRANSFER

IGNITION

KEY

RECOIL

STARTER

HANDLE

CHOKE CONTROL

THROTTLE CONTROL

HEIGHT ADJUST

FIG. 7

SEARS TRAC-PLUS SNOW THROWERS conform to the safety standards of the American National Standards institute,

AUGER CLUTCH LEVER - Starts and stops the auger and impeller (snow gathering and throwing),

TRACTION CLUTCH LEVER-Propels the snow thrower forward and in reverse,

SHIFT ROD LEVER - Selects the speed of the snow thrower (6 speeds forward and 2 speeds reverse), CRANK ASSEMBLY - Changes the direction of snow throwing through the discharge chute.,

CHUTE DEFLECTOR - Changes the distance the snow is thrown,

DISCHARGE CHUTE - Changes the direction the snow is thrown..

WEIGHT TRANSFER PEDAL - Engage for heavy snow conditions, to keep the snow thrower from climbing drifts and hard-packed snow,, When released, it eases trans- port of the snow thrower,

HEIGHT ADJUST SKIDS - Adjusts the ground clear- ance of the auger housing.

IGNITION KEY - Must be inseded and turned to the ON

position to start the engine,

RECOIL STARTER HANDLE - Starts the engine manu- ally.

CHOKE CONTROL - Used to start a cold engine, PRIMER BUTTON - injects fuel directly into the carbu- retor manifold for fast starts in cold weather, THROTTLE CONTROL - Controls the engine speed