5.Place approved plug, if present continue reading
6.Remove oil
7.Tip engine to the lowest point facturer’s
8.Drain oil into
Used oil must be
9.Install oil drain
10.Clean area page 18. below.
11.Remove oil fill
12.Fill with and Fuel Table 1 on page tions below.
DO NOT overfill
over to the equipment
DO NOT allow oil fill cap/dipstick. malfunction or
Contact your Tecumseh Oil.
13.Wipe away any
14.Install oil fill See Figure 42
15.Carefully
post, if provided See "G. Avoid 2. Afterward,
16.Carefully re- See Figures
OH318SA/OH358SA OH195SA/OH195SP
LH195SA/LH195SP LH318SA/LH358SA
Fill Between
FULL “FULL” and “ADD”
Marks
OK
ADD
File was named:
Page 19 |