Safety, Training, Preparation | Troy-Bilt 42051, 42052 specs

Section

Safety

SPARK ARRESTER WARNING TO RESIDENTS OF CALIFORNIA AND SEVERAL OTHER STATES

Under California law, and under the laws of several other states, you are not permitted to operate an internal combustion engine using hydrocarbon fuels on any forest, brush, hay, grain, or grass covered land; or land covered by any flammable agricul- tural crop without an engine spark arrester in continuous effec- tive working order.

The engine on the unit is an internal combustion engine which burns gasoline, a hydrocarbon fuel, and must be equipped with a spark arrester muffler in continuous effective working order. The spark arrester must be attached to the engine exhaust system in such a manner that flames or heat from the system will not ignite flammable material. Failure of the owner/operator of the unit to comply with this regulation is a misdemeanor under California law (and other states) and may also be a violation of other state and/or federal regulations, laws, ordinances or codes. Contact your local fire marshal or forest service for specific information about which regulations apply in your area.

Gear Shift Lever

Chute Directional Control Wheel Drive

Control Lever

Auger Drive Control Lever

Discharge Chute

Chute Deflector Cap

Collector (auger/impeller) Housing

Auger Assembly		Skid Shoe

Training

1. Read this Owner’s Manual and the sepa- rate Engine Owner’s

Manual carefully before operating the unit. Be completely familiar with the controls and the proper use of the unit. Know how to stop the unit and disengage the controls quickly. A re- placement manual is available by con- tacting the factory.

2.Never allow children to operate the unit. Never allow adults to operate the unit without proper instruction.

3.Keep the area of operation clear of

all persons, particularly small children and pets. Keep bystanders at least 25 feet away from the area of operation.

4.Exercise caution to avoid slipping or falling, especially when operating in reverse.

5.Familiarize yourself with all of the safety and operating decals on the unit and on any attachments or accessories.

6.Do not run the engine in an enclosed area. Engine exhaust contains carbon monoxide gas, a deadly poison that is odorless, colorless, and tasteless. Do not operate the unit near buildings, windows, or air conditioners.

7.Keep hands or any other part of the body or clothing away from the inside of the collector (auger/impeller) hous- ing, the discharge chute opening, or moving parts.

8.Do not operate the unit if you are under the influence of alcohol, medi- cation, or when tired or ill.

Preparation

1.Wear approved safety glasses or eye shields during operation or while per- forming an adjustment or repair to protect eyes from foreign objects that may be thrown from the unit.

2.Do not wear loose-fitting clothing, such as scarves, which could be caught by moving parts. Tie up or re- strain long hair.

3.Before starting the engine, check the tightness of all screws, nuts, bolts, and other fasteners. Replace or clean any damaged or unreadable safety and operating labels.

4.Wear adequate winter outer garments when operating the unit. Wear footwear that will improve footing on slippery surfaces.

5.Use extra care when handling gasoline or other fuels. Gasoline and its vapors are highly flammable and explosive.

To help prevent a fire or explosion:

a.Store gasoline only in an approved gasoline storage container, safely out of the reach of children.

b.Never remove the fuel fill cap on the fuel tank, or add fuel while the engine is running or hot.

c.Keep matches, smoking materials, open flames, and sparks away from the fuel tank and gasoline storage container.

d.Fill the fuel tank outdoors and with extreme care. Never fill the fuel tank indoors.

e.Replace the fuel fill cap on the fuel tank, the cap on the gasoline stor- age container, and clean up fuel spills before starting the engine.

f.Leave 1-1/2 inch (3.81 cm) of air space at the top of the fuel tank to allow for fuel expansion.

g.Do not store unit or gasoline stor- age container where there is a dan- ger of an open flame or spark, or where ignition sources are present such as hot water and space heaters, furnaces, clothes dryers, stoves, electric motors, etc.

6.For units equipped with electric-start:

a.Only use a 3-pronged, UL rated and approved, outdoor use power cord. Do not use any adapters on the cord.

42051, 42052 specifications

Troy-Bilt has long been a trusted name in outdoor power equipment, and the models 42051 and 42052 continue this tradition with their robust features and reliable performance. Designed for residential lawn care and landscaping tasks, these models are primarily known for their powerful engine, ease of use, and innovative technology that cater to both novice and experienced users.

At the heart of the Troy-Bilt 42051 and 42052 is a reliable 420cc engine that delivers exceptional power for tackling various yard tasks, whether it's mowing, mulching, or bagging. The engine’s design emphasizes efficiency and ease of starting, ensuring that users can get right to work without any hassle. This engine has been engineered to minimize vibrations, which adds to the overall comfort during prolonged use.

One standout feature of both models is their adjustable cutting height. With multiple positions, users can easily customize the cutting height to suit their lawn's needs, giving them the versatility to achieve the perfect cut no matter the grass type or terrain.

Equipped with a heavy-duty steel deck, the 42051 and 42052 are designed for durability and longevity. This robust construction not only withstands rough conditions and impacts but also facilitates a smooth cutting experience, ensuring consistent results with each pass.

Another notable technology found in these mowers is the TriAction cutting system. This innovative design combines a specially designed blade with a rake that lifts grass for an even, clean cut. The system enhances bagging capability by ensuring that more clippings are efficiently collected, keeping lawns tidy and reducing the need for additional clean-up.

Both models also feature a rear bagging attachment, making it easier to collect clippings and debris as you mow. This capability is particularly advantageous for those looking to maintain a neat and well-kept lawn without the mess that often accompanies traditional mowing.

Moreover, the user-friendly controls make these mowers easy to operate. With intuitive levers and simple starting mechanisms, even those who are new to lawn care can gain confidence quickly.

Overall, the Troy-Bilt 42051 and 42052 embody the brand’s commitment to quality, performance, and user satisfaction, making them excellent choices for homeowners seeking a reliable solution for their lawn care needs. Whether tackling vast yards or smaller spaces, these mowers demonstrate power, innovation, and ease of use, fulfilling the diverse requirements of modern landscaping.