Troy-Bilt 769-03253 warranty Replacing Belts, Auger Belt

Page 17

Replacing Belts

To remove and replace either the auger belt or the drive belt, follow the steps below and then proceed to the specific steps listed under respective sub-headings.

1.Disconnect the chute crank assembly at the discharge chute end by removing the hairpin clip and the flat washer. See Figure 19.

2.Remove the plastic belt cover, located near the engine, by removing the three self-tapping screws that secure it. See Figure 23.

3.a. Loosen the bolt shown in Figure 24 securing the belt keeper bracket and remove the other bolt.

b.Push the belt keeper and bracket up off the engine pulley. See Figure 25.

Auger Belt

4.Remove the hairpin clip and flat washer from the ferrule in order to disconnect the auger idler rod from the brake bracket assembly. See Figure 26.

5.Unhook the spring found on the end of the auger cable from its respective actuator bracket. Refer to Figure 12.

6.Slip the auger control belt (the front belt) off the engine pulley.

7.Pull the brake bracket assembly towards the cable guide roller and unhook the auger cable “Z” fitting. See Figure 27.

8.Remove the upper bolts which attach the auger housing assembly to the frame assembly using a 1/2” wrench. Refer to Figure 28.

6

Maintaining

Your Snow

Thrower

IMPORTANT NEVER replace the auger shear pins with standard pins. Any damage to the auger gearbox or other com- ponents, as a result of

Figure 23

Remove

Loosen

Figure 24

Figure 26

 

Figure 25

Figure 27

 

doing so, will NOT be covered by your snow thrower’s warranty.

Check the condition of both auger belt and drive belt every 25 hours of snow thrower operation. Replace if either shows signs of wear and tear.

Specifications are subject to change without notification or obligation. Images may not reflect your exact model and are for refer- ence purposes only.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Two-Stage Snow Thrower OPERATOR’S ManualCustomer Support Table of ContentsFinding and Recording Model Number Your Responsibility Restrict the use Chute Clean-out ToolSafe Handling of Gasoline Safe Operation PracticesYour Responsibility Average Useful Life Do not modify engineSetting Up Your Snow Thrower Attaching the Shift Rod Attaching the Chute AssemblyDrift Cutters If Equipped Clean-Out ToolFinal Adjustments Tire Pressure Pneumatic Tires Skid ShoesAuger Auger ControlKnow Your Snow Thrower Operating Your Snow ThrowerDrive Control / Auger Control Lock Chute Clean-Out ToolTwo-Way Chute Control Ignition KeyStopping The Engine Recoil StarterStarting The Engine Electric Starter on certain modelsTo Engage Drive Always observe safety rules when performing any maintenanceTo Engage Augers Operating TipsMaking AdjustmentsShift Rod Drive ControlChute Bracket Adjustment Chute AssemblySee Figure Adjust skid shoes as follows Auger ControlLubrication Maintaining Your Snow ThrowerAuger Belt Replacing BeltsDrive Belt Friction Wheel Changing Friction Wheel RubberWipe equipment with an oiled rag to prevent rust Off-Season StorageProblem Cause Remedy Trouble Shooting12.08.06 WarrantyFor parts and/or accessories refer to customer support on
Related manuals
Manual 56 pages 17.46 Kb

769-03253 specifications

The Troy-Bilt 769-03253 is a standout model in the world of outdoor power equipment, specifically tailored for those looking for a robust and efficient gardening solution. This product, often recognized for its reliability and user-friendly design, is ideal for homeowners seeking to maintain their yards with minimal effort.

One of the most notable features of the Troy-Bilt 769-03253 is its powerful 270cc engine, which provides ample power for various yard tasks. This engine delivers strong performance, making it capable of handling tougher jobs like tilling hard, compacted soil or breaking new ground. The engine is designed for easy starting, thanks to its innovative recoil start system, making it accessible to users of all skill levels.

The tilling width of the Troy-Bilt 769-03253 is impressive at 18 inches, allowing users to cover a larger area in less time. This feature is particularly beneficial for larger gardens or landscaping projects. Additionally, the tiller is equipped with a depth adjuster, enabling precise control over how deep you can till into the soil, which is essential for different planting requirements.

Another key attribute of this tiller is its counter-rotating tines. This technology allows for better soil mixing and improved aeration, promoting healthier soil and more robust plant growth. The tines are made from durable materials, ensuring longevity even when used in tougher ground conditions. They are also designed for easy replacement, which adds to the overall convenience.

Ergonomics play a significant role in the design of the Troy-Bilt 769-03253, featuring adjustable handles that accommodate users of various heights. This ensures comfort during extended use, reducing fatigue and enhancing overall productivity. Furthermore, the tiller is designed for optimal stability, with a balanced build that prevents it from tipping during operation.

The Troy-Bilt 769-03253 also incorporates safety features such as an automatic clutch that ensures the tiller comes to a stop when not in use, helping to prevent accidents. With its combination of power, durability, and ease of use, the Troy-Bilt 769-03253 is a top choice for anyone looking to enhance their gardening and landscaping projects, making it a valuable addition to any homeowner's outdoor toolkit.
Top Page Image Contents