Troy-Bilt 772C0767 manual Operating Your Snow Thrower

Page 8

Fuel Shut-Off Valve (Optional Equipment)

On models so equipped, the fuel shut-off valve, located under fuel tank, controls fuel-flow from the fuel tank to the engine. See Figure 6.

Safety Ignition Key

The safety ignition key must be fully inserted and snapped in place before the unit will start. Remove the ignition key to prevent unauthorized use of equipment. See Figure 6.

IMPORTANT: Do NOT attempt to turn the key.

Headlight

The headlight is on whenever the engine is running.

Track Lock Lever

The track lock lever is located on the right side of the snow thrower and is used to select the position of the auger housing and the method of track operation. Move the lever to the right, then forward or backward to one of the three positions. See Figure 7.

Transport: Keeps the front end of the snow thrower up

for easy transport. May also be used on many gravel driveways to clear snow while leaving gravel undisturbed.

Normal Snow: Allows the tracks to be suspended independently for continuous ground contact.

 

Track Lock

 

Lever

Packed

 

Snow

 

Normal

Transport

Snow

 

Figure 7

Packed Snow: Locks the front end of the snow thrower down to the ground for hard-packed or icy snow conditions.

SECTION 4: OPERATING YOUR SNOW THROWER

Before Starting

WARNING: Read, understand, and follow all instructions and warnings on the machine and in this manual before operating.

Gas And Oil Fill-up

Service the engine with gasoline and oil as instructed in the separate engine manual packed with your snow thrower. Read instructions carefully.

WARNING: Use extreme care when handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel machine indoors or while the engine is hot or running. Extinguish cigarettes, cigars, pipes and other sources of ignition.

To Start Engine

NOTE: If unit shows any sign of motion (drive or augers) with the clutch grips disengaged, shut engine off immediately. Readjust as instructed in the Final Adjustments in the Assembly Section.

•Attach spark plug wire to spark plug. Make certain the metal loop on end of the spark plug wire (inside the boot) is fastened securely over the metal tip on the spark plug.

•Make certain the fuel shut-off valve, if so equipped, is in the OPEN (vertical) position.

•Make certain the auger and drive controls are in the disengaged (up) position.

•Move throttle control up to FAST position. Insert ignition key into slot and snap in place. See Figure 6. Be certain it snaps into place. Do not turn key.

NOTE: Engine will not start unless ignition key is inserted into ignition slot in carburetor cover.

Electric Starter (optional)

•Determine that your house wiring is a three-wire grounded system. Ask a licensed electrician if you are not certain.

•If your house wiring system is not a three-wire grounded system, do not use this electric starter under any conditions.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Operator’s Manual Table of Contents Important Safe Operation Practices TrainingMaintenance And Storage Do not modify engineAssembling Your Snow Thrower Drive Control / Auger Control Lock Clean-Out ToolKnow Your Snowthrower Heated Handles Switch on some models Chute CrankAuger Drive Control Shift LeverOperating Your Snow Thrower To Stop Engine To Engage DriveTo Engage Augers Recoil StarterDrift Cutters If Equipped Auger Control TestChute Assembly Operating TipsAuger Control Drive Control and Shift LeverShift Rod Adjustment Lubrication Maintaining Your Snow ThrowerCarburetor Shave Plate and Skid Shoes Servicing Your Snow ThrowerAugers Belt Removal And Replacement Auger BeltsReplacing Friction Wheel Rubber Drive BeltEngine Off-Season StorageTroubleshooting Problem Cause RemedyTWO Year Supreme Warranty Parts LISTS/LISTE DE Pièces Détachées Part RÉF Pièce Description 31A-701 Page 2227 38 44 31A-702 05.9.05 Page 31A-703 05.9.05 22 20 31A-704 352 31A-705 05.9.05 ANS Deux DE Suprème Garantie 9 Chapitre Dépannage DE Guide 8 Chapitre Remisage de Instructions Frottement Courroies les de Remplacement Patins et LameTarières Entretien 7 ChapitreLubrification PanneauVitesses de levier du Tige Patin’éjection Goulotte Tarière la de CommandeVitesses de levier et transmission la de Commande ’utilisation Conseils LA DE Dégagement DE OutilTarières les de Embrayage ’entraînement de Embrayage’huile et d’essence Pleins Démarrage le AvantGoulotte la de Manivelle ’inclinaison de Commande Vitesses de LevierTarière la de commande la de Blocage l’entraînement de CommandeGoulotte la de manivelle la de Montage Guidon du Montage’assemblage Avant ’assemblage pour requis ArticlesÉchéant Remisage ET Entretien Préparation FormationMoteur DE Information ’utilisation Notice

772C0767 specifications

The Troy-Bilt 772C0767 is a versatile and powerful string trimmer designed for homeowners and landscaping professionals who need an efficient tool for maintaining gardens, yards, and outdoor spaces. One of the standout features of this trimmer is its reliable engine, which delivers impressive performance and a consistent cutting power, making it ideal for tackling tough grass and weeds.

Equipped with a 159cc auto choke engine, the Troy-Bilt 772C0767 offers ease of starting and smooth operation, reducing the time you spend preparing to work. The innovative Easy Start technology is designed to minimize the effort required to start the trimmer, allowing users to quickly get to work without the frustrations often associated with traditional starting methods.

The trimmer boasts a 17-inch cutting width, enabling expansive coverage and efficiency as you navigate through larger areas. This cutting width makes it suitable for working around flower beds, fences, and other obstacles while providing a clean and precise cut. Furthermore, the dual-line bump head allows for quick line advancement, ensuring that you can keep cutting without frequent interruptions.

A significant aspect of the Troy-Bilt 772C0767 is its lightweight and ergonomically designed frame. Weighing in at just under 11 pounds, this trimmer is easy to maneuver and reduces user fatigue during longer tasks. The comfortable handle grip enhances control, while the adjustable shaft accommodates users of different heights, making it suitable for a wide range of individuals.

In addition to its physical features, the Troy-Bilt 772C0767 incorporates advanced technologies such as the Turbo-Spin feature. This unique design allows for better airflow around the trimmer line, improving cutting efficiency and ensuring optimal performance in various mowing conditions.

Durability is also a key characteristic of the Troy-Bilt 772C0767. Built with high-quality materials, this trimmer is designed to withstand regular use in tough outdoor environments. The solid construction ensures reliability, allowing you to invest in a tool that will serve you well over time.

Overall, the Troy-Bilt 772C0767 string trimmer combines power, efficiency, and user-friendly features to create an essential tool for anyone looking to maintain their yard or garden. With its combination of innovative technologies and quality construction, this trimmer is a smart choice for all your trimming needs.
Top Page Image Contents