Troy-Bilt 769-03244 warranty Maintaining Your Snow Thrower, Engine, Lubrication

Page 14

6

Maintaining

Your Snow

Thrower

WARNING

Before lubricating, repairing, or inspect- ing, disengage all controls and stop engine. Wait until all moving parts have come to a complete stop.

Engine

Refer to the separate engine manual packed with your unit for all engine maintenance.

Lubrication

Engine

Refer to the separate engine manual packed with your unit for all engine lubrication instructions.

Gear Shaft

The gear (hex) shaft should be lubricated at least once a season or after every 25 hours of operation.

1.Carefully pivot the snow thrower up and forward so that it rests on the auger housing.

2.Remove the lower frame cover by removing the two screws which secure it.

3.Apply a light coating of an all-weather multi-purpose oil to the hex shaft. See Figure 6-1.

NOTE: Avoid getting oil on rubber friction wheel and aluminum drive plate.

Wheels

At least once a season, remove both wheels. Clean and coat the axles with a multipurpose automotive grease before reinstalling wheels.

Chute Directional Control (optional)

Once a season, the joystick should be lubricated with petroleum jelly, linseed oil, mineral oil, paraffin wax or 3-in-1 oil.

Auger Shaft

At least once a season, remove the shear pins on auger shaft. Spray lubricant inside shaft, around the spacers. Also lubricate the flange bearings found at either end of the shaft. See Figure 6-2.

 

Figure 6-1

 

3HEARE0IN

3PACERS

"EARING

 

 

 

Figure 6-2

 

Keep all grease and oil off of the rubber friction wheel and aluminum drive plate.

Shave Plate and Skid Shoes

The shave plate and skid shoes on the bottom of the snow thrower are subject to wear. They should be checked periodically and replaced when necessary. To remove skid shoes:

1. Remove the four carriage bolts and hex flange nuts which secure them to the snow thrower.

2. Reassemble new skid shoes with the four carriage bolts (two on each side) and hex flange nuts. Refer to Figure 6-3.

To remove shave plate:

1. Remove the carriage bolts and hex nuts which attach

 

it and the skid shoes to the snow thrower housing.

Figure 6-3

 

2.Reassemble new shave plate, making sure heads of carriage bolts are to the inside of housing. Tighten securely.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Two-Stage Snow Thrower 769-03244Customer Support Table of ContentsFinding and Recording Model Number Chute Clean-out Tool Your Responsibility Restrict the usePreparation Safe Operation PracticesTraining Your ResponsibilityDo not modify engine Maintenance & StorageOperation Average Useful LifeSetting Up Your Snow Thrower Lamp Wiring Harness If equipped Clean-Out ToolHousing Ice from the chuteOperating Your Snow Thrower Know Your Snow Thrower$26% #/.42 Electric Starter on certain models Gas & Oil Fill-UpStopping The Engine Recoil Starter To Engage DriveTo Engage Augers Auger Control TestShift Cable Making AdjustmentsChute Assembly optional Drive ControlProperty Chute Bracket AdjustmentTire Pressure Lubrication Maintaining Your Snow ThrowerEngine Shave Plate and Skid ShoesUnhook the support bracket spring from the frame Auger Belt ReplacementRoll the auger belt off the engine pulley. See Figure Drive Belt Replacement Remove and replace belt in the reverse orderFriction Wheel Removal Remove the rubber ring from between the platesOff-Season Storage Wipe equipment with an oiled rag to prevent rustTrouble Shooting Problem Cause RemedyWarranty TWO Year Limited WarrantyAuger Housing COMPONENTS/COMPOSANTS DU Logement DES Tarières Manual Chute Control Part Description RÉF Pièce Optional/en option Part Description RÉF Pièce 30 in/po Remarque Lhabitacle peut être légèrement différentPart Description RÉF Pièce 31AE6GKF500 Part

769-03244 specifications

The Troy-Bilt 769-03244 is a versatile and powerful garden tiller designed for homeowners and gardening enthusiasts seeking to cultivate their outdoor spaces efficiently. This tiller stands out for its robust features, advanced technologies, and user-friendly characteristics, making it an ideal choice for both seasoned gardeners and those new to gardening.

One of the main features of the Troy-Bilt 769-03244 is its powerful 4-cycle engine, which provides sufficient torque and durability needed to break up tough soil and prepare it for planting. The engine’s design ensures lower emissions and quieter operation compared to conventional 2-cycle engines, making it a more environmentally friendly option. The rear-tine tiller design allows for better balance and control, ensuring that users can maneuver it effortlessly across various terrains.

Another significant characteristic is the tiller's adjustable tilling width. The Troy-Bilt 769-03244 comes with a tilling width of up to 16 inches, which can be adjusted depending on the size and needs of your garden. This feature enhances its versatility, allowing it to work well in tight spaces or larger plots of land. Moreover, the tiller offers a tilling depth of up to 8 inches, ensuring thorough soil preparation, which is crucial for healthy plant growth.

The Troy-Bilt 769-03244 also incorporates the company’s patented “Counter-Rotating Tines” technology. This feature allows the tines to spin in the opposite direction of the tiller’s forward motion, providing superior soil penetration and reducing the risk of the tiller bouncing or skipping across the ground. This innovation not only enhances tilling efficiency but also improves soil aeration, leading to healthier root systems for your plants.

Additional user-friendly characteristics include the adjustable handle, which can be modified to accommodate different heights for operator comfort and ease of control. The tiller’s lightweight design makes it easier to transport and store, adding to its practicality.

In summary, the Troy-Bilt 769-03244 is an excellent investment for anyone looking to cultivate their garden with ease and efficiency. Its powerful engine, adjustable tilling width and depth, counter-rotating tines technology, and user-centric design features work in harmony to create a tilling experience that is both effective and enjoyable. Whether you are preparing a new garden bed or maintaining an existing one, this tiller is equipped to meet your gardening needs with reliability and performance.
Top Page Image Contents