Snapper manual Adjustments, Speed Selector Adjustment, Auger Drive Tension

Page 23

Adjustments

C

AB

A

D

C

B

Figure 18. Speed Selector Linkage

A.Shift Rod

B.Carriage Bolts

C.Nuts

SPEED SELECTOR ADJUSTMENT

1.Loosen the two nuts (C, Figure 18).

2.Place the shift lever in 5th gear.

3.Push the lower rod into the housing and tighten the two nuts (C). Do not lift up or down on rods while tightening. Make sure the shoulders of the carriage bolts (B) are in the slots.

4.Always check traction drive tension and auger drive tension after adjusting speed selector.

AUGER DRIVE TENSION

WARNING

Do not over-tighten, as this may lift the lever and cause auger drive to be engaged without depressing the Auger Control.

CHANNEL HANDLE MODELS

1.With the drive lever released, the hook (B, Figure 19) should barely touch the lever (C) without raising it. There can be a maximum 1/32” clearance as shown.

2.To adjust, loosen the two nuts (D) and hold the lower rod to keep from rotating. Turn the turnbuckle (A) toward the right to lower the spring hook (B), or toward the left to raise the spring hook (B).

3.Tighten the two nuts (D) against the turnbuckle (A). Hold the turnbuckle (A) with pliers while tightening the nuts (D).

TUBE HANDLE MODELS

1.With the drive lever released, the hook (B, Figure 20) should barely touch the lever (C) without raising it. There can be a maximum 1/32” clearance as shown.

2.To adjust, loosen nut (D, Figure 20) by holding the

Figure 19. Auger Drive Linkage (Channel Handle Models)

A.Turnbuckle

B.Spring Hook

C.Lever

D.Nuts

A

D

E

C

B

Figure 20. Auger Drive Adjustment (Tube Handle Models)

A.Adjusting Flats

B.Spring Hook

C.Lever

D.Nut

E.Adjustment Screw

adjusting flats (A)and turning nut (D). Turn adjust- ment flats and hold screw. The adjustment screw is a phillips screw and the head can be held or turned by inserting a screwdriver through the spring.

3. Hold adjusting flats (A) and tighten nut (D).

ALL MODELS

4.Start unit and check auger. auger must not be engaged unless auger control is depressed.

5.With engine running, fully depress auger control, the auger should engage and run normally.

6.Release auger control. Auger must stop within 5 seconds.

22

Image 23
Contents Models OPERATOR’S ManualTable of Contents Training Safety Rules & InformationChildren Safety RulesPage CE Model Decals DecalsDecals North American Model DecalsSafety Icons Safety IconsCE Models Identification NumbersCE Identification TAG Markings North AmericanManual Electric Rotator Model Features, Controls, & OperationControl Locations Features & Controls Checks Before Each START-UP OperationManual Start Starting ControlsStarting the Engine Units with Optional Electric StartEngine Speed Operating the SnowthrowerClearing a Clogged Discharge Chute Ground Speed SelectorModels with Remote Deflector Control DeflectorScraper BAR & Skid Shoes Models with Chute Deflector KnobEasy Turn When Pushing the SnowthrowerFull Traction Easy Turn Traction Easy Turn Freewheeling Traction Drive LockStorage StorageAfter Each USE Auger Gear Case Lubrication Regular MaintenanceMaintenance Schedule Checking Tire PressureLubrication Regular MaintenanceCheck / Lubricate FREE-HAND Linkage Lubricating the Auger Shaft & AssemblyPage Troubleshooting Troubleshooting, Adjustments, ServicePoor traction Auger does not stop when augerAuger rotates, but snow is not Thrown far enoughRelease auger control. Auger must stop within 5 seconds AdjustmentsSpeed Selector Adjustment Auger Drive TensionTraction Drive Tension Initial AdjustmentRun-In Adjustment Mounting Hardware Pinion Gear AdjustmentGear Bracket Adjustment Shear PIN Replacement Adjustments & ServiceEasy Turn Cable Adjustment Belt Cover Screws Belt ReplacementService Chassis SpecificationsDimensions EngineTechnical Manuals Parts & AccessoriesReplacement Parts Maintenance Items

1694602 9247E, 11694602 9247E, 1694589 9560E, 1694597 9560M, 1694606 E9247, 1694590 1060E, 1694598 1060M, 1694603 10287E, 1694607 E10287, 1694591 1170E, 1694599 1170M, 1694604 11327E, 1694608 E11327, 1694592 1280E, 1694600 1280M, 1694605 12387E, 1694609 E specifications

Snapper 1694602 9247E is a versatile outdoor power equipment, known for its efficient lawn care capabilities. Built with a powerful engine, it delivers robust performance, ensuring that even the toughest grass can be tackled with ease. The design incorporates advanced ergonomic features, allowing users to maintain comfort during lengthy operation times.

The model 11694602 9247E is equipped with state-of-the-art cutting technology, allowing for precision trimming and an even lawn finish. Its durable construction features all-weather materials, ensuring longevity in various outdoor conditions. Additionally, it often includes adjustable height settings, allowing for customization based on user needs and specific lawn types.

Snapper models like 1694589 9560E and 1694597 9560M highlight the manufacturer's commitment to innovation with their user-friendly controls and responsive handling. These models are designed to minimize user fatigue while maximizing efficiency. Enhanced safety features are also embedded in these versions, making them suitable for both seasoned professionals and casual gardeners.

The Snapper 1694606 E9247 and 1694590 1060E bring forward technological advancements such as electric start options. This eliminates the hassle of traditional pull-start systems, providing an effortless start-up experience. Additionally, these models often boast features such as low-emission engines to cater to environmentally conscious consumers.

Further enhancing the product line, the Snapper 1694598 1060M and 1694603 10287E integrate smart technology to aid in better lawn management. These models might include integrated sensors that optimize performance based on grass conditions, resulting in better fuel efficiency and reduced operational costs.

The Snapper 1694607 E10287 and 1694591 1170E stand out with their robust build quality, designed to withstand the rigors of regular use. Equipped with wide cutting decks, they promote faster mowing times, ideal for large areas.

Models like 1694599 1170M and 1694604 11327E carry on these beneficial characteristics with additional enhancements like mulching capabilities. This feature enables the grass clippings to be finely chopped and returned to the lawn as natural fertilizer, fostering healthier growth.

The Snapper 1694608 E11327 and 1694592 1280E rounds out the series with their efficiency-focused designs. They prioritize fuel economy and ease of maintenance, allowing users not only to care for their lawns but also save on operational costs.

In summary, Snapper’s extensive range, including models like 1694600 1280M, 1694605 12387E, and 1694609 E, represents a commitment to quality, innovation, and user convenience. Each model is engineered to deliver exceptional performance, making them a favorite choice among outdoor power equipment users.