To Engage Track Drive, To Engage Augers

To Engage Track Drive

•With the engine running near top speed, move the shift lever into one of the six FORWARD positions or two REVERSE positions. Select a speed appropriate for the snow conditions that exist.

NOTE: Use slower speeds in higher snow and until you are familiar with the operation of the snow thrower.

•Squeeze the traction control against the right handle and the snow thrower will move. Release it and the drive motion will stop.

IMPORTANT: NEVER move the shift lever without first releasing the traction control. Doing so will cause premature wear to the drive system’s friction wheel.

To Engage Augers

To engage the augers and start the snow throwing action, proceed as follows:

•Squeeze the auger control against the left handle. To disengage power to the augers:

•Release both the auger control and the traction control, if engaged.

The auger control can be locked so you can turn the

electric chute directional control without interrupting the snow throwing process.

Operating Tips

NOTE: Allow the engine to warm up for a few minutes. The engine will not develop full power until it reaches operating temperature.

WARNING: The temperature of the muffler and the surrounding areas may

exceed 150°F. Avoid these areas.

•For the most efficient snow removal, remove snow immediately after it falls.

•Discharge the snow downwind whenever possible.

•Slightly overlap each previous path.

•Set the skid shoes 1/4" below the shave plate for normal usage. The skid shoes may be adjusted upward (to lower the shave plate) for hard-packed snow. Adjust downward (to raise the shave plate) when using on gravel or crushed rock.

•Be certain to follow the precautions found in the To Stop Engine section to prevent possible freeze-up.

•Clean the snow thrower thoroughly after each use.

SECTION 5: MAKING ADJUSTMENT

WARNING: NEVER attempt to make any adjustments while the engine is running, except where specified in the operator’s manual.

Auger Control Adjustment

Refer to the information found under Final Adjustments in the Assembly Section to adjust the auger control.

Traction Control Adjustment

Refer to the information found under Final Adjustment in the Assembly Section to adjust the traction control. If you are uncertain that you have reached the correct adjustment, proceed as follows:

WARNING: Drain the gasoline out of the snow thrower’s tank, or place a piece of plastic film under the gas cap to avoid spillage BEFORE making the adjustment.

•Tip the snow thrower forward, allowing it to rest on the auger housing.

•Remove the frame cover underneath the snow thrower by removing the six self-tapping screws.

•With the traction control released, there must be clearance between the friction wheel and the drive plate in all positions of the shift lever.

•With the traction control engaged, the friction wheel must contact the drive plate. See Figure 9.

Gear Shaft	Drive
Gear Shaft	Cable
Friction Wheel	Pivot Rod
Friction Wheel
Rubber
	Drive
	Plate

Figure 9

If adjustment is necessary:

•Loosen the jam nut on the traction drive cable. Adjust the cable as necessary. Refer to Figure 5.

•Retighten the jam nut to secure the cable when correct adjustment is reached.

•Reassemble the frame cover.

NOTE: If you placed plastic film under the gas cap, be certain to remove it before operating the snow thrower.

750T specifications

The White Outdoor 750T is a robust and reliable machine designed to meet the demands of outdoor maintenance tasks. This versatile piece of equipment is particularly well-regarded for its performance in various applications, including landscaping, snow removal, and light-duty towing. Below are the key features and technologies that distinguish the White Outdoor 750T.

Powerful Engine: At the heart of the White Outdoor 750T is a potent engine that provides ample power for a range of tasks. This engine is designed for efficiency and durability, ensuring that it can withstand prolonged use in challenging conditions. Coupled with its reliable performance, it allows users to tackle tough jobs with ease.

Superior Cutting Deck: The 750T features an innovative cutting deck that maximizes efficiency and effectiveness. Its design allows for a clean and precise cut, which is crucial for maintaining a well-groomed lawn. The deck is adjustable, enabling users to easily change cutting heights to suit different grass types and environmental conditions.

Rugged Construction: Built with high-quality materials, the White Outdoor 750T is designed to endure heavy usage. Its rugged construction ensures that it can tackle rough terrain without compromising performance. This durability makes it a favored choice among both homeowners and professional landscapers.

User-Friendly Controls: The machine's user-friendly control layout makes it accessible for operators of all skill levels. Intuitive controls allow users to quickly familiarize themselves with the functions, enhancing overall efficiency and safety during operation.

Advanced Safety Features: Safety is a top priority in the design of the White Outdoor 750T. Equipped with several safety features, including an automatic shut-off mechanism, it helps prevent accidents and enhances user confidence during operation. This focus on safety ensures that both the operator and bystanders remain protected.

Versatility: One of the standout characteristics of the 750T is its versatility. Users can attach various accessories, such as plows and spreaders, allowing the machine to adapt to different tasks throughout the year. This multifunctionality makes it a valuable asset for homeowners who seek an all-in-one solution for their outdoor needs.

In summary, the White Outdoor 750T combines a powerful engine, superior cutting deck, rugged construction, user-friendly controls, advanced safety features, and the ability to handle various attachments. Its blend of performance and durability makes it an excellent choice for anyone looking to maintain their outdoor space.