White Outdoor 750T manual Servicing Friction Wheel Rubber, Off-season Storage

Page 14

NOTE: The support bracket must rest on the stop bolt after the new belt has been assembled.

Friction

 

Wheel

Drive Plate

 

Stop Bolt

 

Support Bracket

Auger Pulley

 

Figure 16

Servicing Friction Wheel Rubber

The rubber on the friction wheel is subject to wear and should be checked after 25 hours of operation, and periodically thereafter. Replace the friction wheel rubber if any signs of wear or cracking are found.

Drain the gasoline from the snow thrower.

Tip the snow thrower up and forward, so that it rests on the housing.

Remove six self-tapping screws from the frame cover underneath the snow thrower.

Remove the click pins which secure the wheels, and remove the wheels from the axle.

Using a 7/8" wrench to hold the shaft, loosen, but do not completely remove, the hex bolt and bell washer on the left end of gear shaft. See Figure 17.

Hex Bolt &

Bell Washer

Track

Figure 17

Lightly tap the hex nut to dislodge the ball bearing from the right side of frame before removing the hex nut and bell washer from left end of shaft.

Move the gear shaft to the right and slide the friction wheel assembly from the shaft. See Figure 18.

Remove the six screws from the friction wheel assembly (three from each side). Remove the friction wheel rubber from between the friction wheel plates. See Figure 18.

Reassemble new friction wheel rubber to the friction wheel plates and hub, tightening the six screws in rotation and with equal force.

Position the friction wheel assembly up onto the pin of the shift rod assembly, and slide the shaft through the assembly. Reassemble in reverse order.

Shift Rod

Assembly

Sprocket

Spacer

Pin

Friction Wheel

Assembly

Support

Bracket

Shaft

Screws

Friction Wheel Rubber

Hub

Screws

Friction Wheel Plates

Figure 18

Off-season Storage

WARNING: Drain fuel into an approved container outdoors, away from an open flame. Allow engine to cool. Extinguish cigarettes, cigars, pipes, and other sources of ignition prior to draining fuel. Fuel left in engine for extended periods deteriorates and will cause starting problems.

14

Image 14
Contents OPERATOR’S Manual Table of Contents Preparation Important Safe Operation PracticesTraining OperationMaintenance And Storage Your ResponsibilityUnpacking AssemblyAssembling Your Snow Thrower Loose PartsSkid Shoe Adjustment Final AdjustmentsAuger Control Adjustment Traction Control and Shift Lever AdjustmentAuger Drive Control Know Your Snow ThrowerChute Tilt Control Skid ShoeOperating Your Snow Thrower Recoil Starter To Start EngineElectric Starter To Stop EngineTo Engage Track Drive Auger Control AdjustmentTraction Control Adjustment To Engage AugersMaintaining Your Snow Thrower Augers Servicing Your Snow ThrowerEngine Auger Belts Belt Removal And ReplacementShave Plate and Skid Shoes Drive BeltServicing Friction Wheel Rubber Off-season StoragePage Troubleshooting Problem Cause RemedyModel 750T Part DescriptionLight ass’y 732-0193 Comp. Spring, .39 x .6 x Model 750T Flat Washer .656 ID x 1.25 OD Model 750T Models 750T 315 Model 750T 4039 Models 750T MANUFACTURER’S Limited Warranty for

750T specifications

The White Outdoor 750T is a robust and reliable machine designed to meet the demands of outdoor maintenance tasks. This versatile piece of equipment is particularly well-regarded for its performance in various applications, including landscaping, snow removal, and light-duty towing. Below are the key features and technologies that distinguish the White Outdoor 750T.

Powerful Engine: At the heart of the White Outdoor 750T is a potent engine that provides ample power for a range of tasks. This engine is designed for efficiency and durability, ensuring that it can withstand prolonged use in challenging conditions. Coupled with its reliable performance, it allows users to tackle tough jobs with ease.

Superior Cutting Deck: The 750T features an innovative cutting deck that maximizes efficiency and effectiveness. Its design allows for a clean and precise cut, which is crucial for maintaining a well-groomed lawn. The deck is adjustable, enabling users to easily change cutting heights to suit different grass types and environmental conditions.

Rugged Construction: Built with high-quality materials, the White Outdoor 750T is designed to endure heavy usage. Its rugged construction ensures that it can tackle rough terrain without compromising performance. This durability makes it a favored choice among both homeowners and professional landscapers.

User-Friendly Controls: The machine's user-friendly control layout makes it accessible for operators of all skill levels. Intuitive controls allow users to quickly familiarize themselves with the functions, enhancing overall efficiency and safety during operation.

Advanced Safety Features: Safety is a top priority in the design of the White Outdoor 750T. Equipped with several safety features, including an automatic shut-off mechanism, it helps prevent accidents and enhances user confidence during operation. This focus on safety ensures that both the operator and bystanders remain protected.

Versatility: One of the standout characteristics of the 750T is its versatility. Users can attach various accessories, such as plows and spreaders, allowing the machine to adapt to different tasks throughout the year. This multifunctionality makes it a valuable asset for homeowners who seek an all-in-one solution for their outdoor needs.

In summary, the White Outdoor 750T combines a powerful engine, superior cutting deck, rugged construction, user-friendly controls, advanced safety features, and the ability to handle various attachments. Its blend of performance and durability makes it an excellent choice for anyone looking to maintain their outdoor space.