Servicing Your Snow Thrower, Engine, Augers

Drive and Shifting Mechanism

Lubricate at least once a season or after every 25 hours of operation. Remove the rear cover, lubricate any chains, sprockets, gears, bearings, shafts, and shifting mechanism at least once a season. Use engine oil or a spray lubricant. Avoid getting oil on the friction wheel rubber and aluminum drive plate. Refer to Figure 9.

There is a grease fitting on the top of the axle shaft which drives the rear track drive wheels on both sides of the unit. Grease these fittings every 25 hours or once a season.

Chute Directional Control

The spiral on the end of the chute directional control and the base of the discharge chute itself should be lubed with multi-purpose automotive grease once a season. See Figure 12.

Lube Spiral

and Chute Base

Figure 12

Traction Control / Auger Control Lock

The cams on the ends of the control rods which interlock the traction drive and auger drive controls must be lubricated at least once a season or every 25 hours of operation. The cams can be accessed beneath the handle panel. Use a multi-purpose automotive grease.

Auger Shaft

At least once a season, remove the shear bolts on the auger shaft. Spray lubricant inside the shaft. Also lubricate the plastic auger bearings at least once a season and grease the fittings on the end of the auger shaft with a standard grease gun. See Figure 13.

Vent Plug	Grease Fitting
Vent Plug
Plastic		Plastic
Bearing	Shear Bolts	Bearing

Figure 13

Gear Case

The gear case is equipped with a grease fitting on the left housing and should be lubricated with Shell Alvania grease EPR00, part number 737-0168 every 25 hours. See Figure 13.

Do not overfill the gear case. Damage to the seals could result. Be sure the vent plug is free of grease in order to relieve pressure.

Engine

Refer to the separate engine manual packed with your unit for all engine lubrication instructions.

IMPORTANT: When following instructions in separate engine manual for draining oil, be sure to protect frame to avoid oil dripping onto transmission parts.

SECTION 7: SERVICING YOUR SNOW THROWER

WARNING: Before servicing, repairing, or inspecting, disengage all clutch levers and stop engine. Wait until all moving parts have come to a complete stop. Disconnect spark plug wire and ground it against the engine to prevent unintended starting.

Engine

Refer to the separate engine manual packed with your unit for all engine maintenance procedures.

Augers

•The augers are secured to the spiral shaft with two shear bolts and hex lock nuts. If you hit a hard foreign object or ice jam, the snow thrower is designed so that the bolts may shear.

Refer to Figure 13.

•If the augers will not turn, check to see if the bolts have sheared. Replacement shear bolts and hex lock nuts have been provided with the snow thrower. When replacing bolts, spray an oil lubricant into shaft before inserting new bolts.

750T specifications

The White Outdoor 750T is a robust and reliable machine designed to meet the demands of outdoor maintenance tasks. This versatile piece of equipment is particularly well-regarded for its performance in various applications, including landscaping, snow removal, and light-duty towing. Below are the key features and technologies that distinguish the White Outdoor 750T.

Powerful Engine: At the heart of the White Outdoor 750T is a potent engine that provides ample power for a range of tasks. This engine is designed for efficiency and durability, ensuring that it can withstand prolonged use in challenging conditions. Coupled with its reliable performance, it allows users to tackle tough jobs with ease.

Superior Cutting Deck: The 750T features an innovative cutting deck that maximizes efficiency and effectiveness. Its design allows for a clean and precise cut, which is crucial for maintaining a well-groomed lawn. The deck is adjustable, enabling users to easily change cutting heights to suit different grass types and environmental conditions.

Rugged Construction: Built with high-quality materials, the White Outdoor 750T is designed to endure heavy usage. Its rugged construction ensures that it can tackle rough terrain without compromising performance. This durability makes it a favored choice among both homeowners and professional landscapers.

User-Friendly Controls: The machine's user-friendly control layout makes it accessible for operators of all skill levels. Intuitive controls allow users to quickly familiarize themselves with the functions, enhancing overall efficiency and safety during operation.

Advanced Safety Features: Safety is a top priority in the design of the White Outdoor 750T. Equipped with several safety features, including an automatic shut-off mechanism, it helps prevent accidents and enhances user confidence during operation. This focus on safety ensures that both the operator and bystanders remain protected.

Versatility: One of the standout characteristics of the 750T is its versatility. Users can attach various accessories, such as plows and spreaders, allowing the machine to adapt to different tasks throughout the year. This multifunctionality makes it a valuable asset for homeowners who seek an all-in-one solution for their outdoor needs.

In summary, the White Outdoor 750T combines a powerful engine, superior cutting deck, rugged construction, user-friendly controls, advanced safety features, and the ability to handle various attachments. Its blend of performance and durability makes it an excellent choice for anyone looking to maintain their outdoor space.