White Outdoor SB 45 manual Installing chute crank, Assembling the chute

Page 6

the control handle. Hold the “Z” fitting with the pliers, not the cable, to avoid damaging the cable.

NOTE: The upper hole in the control handle provides for adjustment in belt tension. Refer to Belt Tension Adjustment Section of this manual for instructions.

Installing chute crank

Thread one 5/16” hex nut all the way onto the eyebolt. See Figure 5. All necessary hardware is included in the hardware pack shipped with your unit. See Figure 2 for more details.

Slide the eyebolt onto the chute crank. Insert eyebolt into the hole in the lower handle.

Chute Crank

Eye Bolt

Hex

Nuts

Saddle

Washer

Secure eyebolt with 5/16” saddle washer and hex nut. The cupped side of washer goes against the handle. Adjust lower hex nut until the eyebolt is positioned so that the chute crank turns freely (does not bind).

Move upper hex nut down against the lower handle. Tighten lower hex nut securely.

Assembling the chute

The snow thrower has been shipped with the upper chute pivoted all the way down. Assemble as follows:

Turn the chute crank until the chute faces straight to the front. See Figure 7.

 

Flat

Hand

Washer

Carriage

Knob

 

Bolt

Front

 

Upper

Chute

Figure 5

Insert the chute crank into the coupler at the top right side of the snow thrower. See Figure 6.

Rotate the crank to align holes, and insert the cotter pin. Bend ends of cotter pin in opposite directions to secure. See Figure 6.

Cotter Pin

Chute Crank

Coupler

Figure 6

Figure 7

Remove the hand knob, flat washer and carriage bolt from the upper chute. See Figure 7.

Pivot the upper chute up so that there is no gap between the upper and the lower chute. See Figure 8. Secure with hardware just removed.

No

Gap

Pivot upper

chute

Figure 8

6

Image 6
Contents Operator’s Manual Table of Contents Operation Important Safe Operation PracticesTraining PreparationMaintenance And Storage Your ResponsibilityAssembling Your Snow Thrower Installing chute crank Assembling the chuteKnow Your Snow Thrower Auger Control HandleOperating Your Snow Thrower Shave plate Belt tensionFasteners ServiceEngine Replacing beltGeneral Recommendations MaintenanceOFF-SEASON Storage LubricationTroubleshooting Guide Problem Cause RemedyParts List for Model SB45 & SB55 Model SB45 & SB55 Part DescriptionDescription Shipped 12 -0535- Hose, Fuel Line 13 -0540A Fuel Tank- 2 qt 751-0800 Your Notes Dates Your Notes Dates MANUFACTURER’S Limited Warranty for

SB 45 specifications

The White Outdoor SB 45 is a versatile and robust snow blower designed for residential use, making it ideal for homeowners who need an efficient solution for snow removal during winters. With an emphasis on performance and durability, the SB 45 is equipped with features that ensure effective snow clearing and ease of use.

One of the standout features of the SB 45 is its powerful engine. Typically powered by a reliable four-stroke engine, the snow blower delivers considerable torque and operational efficiency. This allows it to tackle heavy snow accumulations and icy conditions, making it suitable for a variety of winter climates.

The SB 45 is designed with an adjustable snow throwing distance, which empowers users to control where the snow is discharged. This is achieved through a simple lever system that adjusts the direction of the chute, allowing for precise snow placement without the need for additional manual effort.

Another key technology integrated into the SB 45 is its two-stage snow removal system. The first stage involves an auger that breaks up the snow, while the second stage uses an impeller to throw the snow out of the chute. This two-stage system ensures that even compacted snow is efficiently cleared, making the machine more effective than single-stage models.

The construction of the SB 45 features durable materials and a robust build that can withstand the rigors of winter use. The steel auger and heavy-duty frame contribute to its longevity, while also providing the strength needed to navigate through tough snow conditions.

Ease of maneuverability is another important aspect of the SB 45. The snow blower comes with large all-terrain tires that offer excellent traction, allowing it to navigate icy sidewalks and driveways with ease. Additionally, the machine's compact size and lightweight design enhance its portability, ensuring that it can be stored conveniently when not in use.

Convenience features such as a self-propelled drive system allow users to operate the snow blower without the need for excessive physical effort. Multiple speed settings ensure that users can adjust the speed according to their preference and the snow conditions.

Overall, the White Outdoor SB 45 is a reliable and efficient snow blower that combines power, durability, and user-friendly features. Its advanced technologies and thoughtful design make it a valuable tool for anyone looking to keep their property clear of snow during the winter months.