Operating Your Snow Thrower | White Outdoor SB 45 specs

SECTION 4: OPERATING YOUR SNOW THROWER

Fuel and oil mixture

WARNING: Handle gasoline carefully; remember that it is highly flammable. Never fill fuel tank indoors, when engine is running or while engine is still hot. Do not smoke when filling fuel tank.

Your snow thrower uses a two cycle engine that requires a mixture of gasoline and two cycle engine oil. Refer to the engine operator’s manual for proper oil and fuel recommendations.

•A plastic cup was provided inside the fuel fill opening on the fuel tank. Remove and discard this cup before filling up the tank. Use the seperate fuel tank cap to close after fill-up.

Starting engine

•To start the engine of your snow thrower, follow the starting instructions in the engine operator’s manual.

Operating snow thrower

•Loosen hand knobs on two sides and adjust the upper discharge chute up or down as shown in Figure 10. Then use the chute crank to position the entire discharge chute in order to discharge

snow with the wind.

•Release the auger control handle to stop the snow throwing action and the forward motion.

Press auger control handle to engage auger

Turn handle to change discharge direction

Figure 11

Stopping engine

•Run the engine for a few minutes before stopping to help dry up any moisture on the engine.

•Turn ignition key to OFF position and remove it from the snow thrower.

IMPORTANT: Keep the ignition key in a safe place. Engine will not start without it.

• Wipe all snow and moisture from the unit. Move

the choke lever back and forth several times and

			r
		e
		t		e
		a		e
e			c
r			n
G		t
		a
		s
	i
D

	e	s	s	n	c	e
L		s	ta		c


	is
D

Hand

Knob

Upper Discharge Chute

Change position by chute crank

leave it in the ON position.

Operating tips

•For most efficient snow removal, remove snow immediately after it falls.

•Discharge snow downwind whenever possible. Slightly overlap each previously cleared path.

•Lifting up on the handle will allow the rubber on the augers to propel the snow thrower forward. Pushing downward on the handle will raise the augers off the ground and stop the forward motion.

Figure 10

WARNING: Do not throw snow towards a building as objects could be discharged with enough force to cause damage.

•After making sure no bystanders or obstacles are in front of the unit, engage the auger control handle. See Figure 11. As the snow thrower starts to move, maintain a firm hold on the handle, and guide the snow thrower along the path to be cleared.

NOTE: Excessive upward pressure on the handle will result in premature wear on the rubber auger blades which will not be covered by warranty.

•Run the engine for a few minutes before stopping to help dry any moisture on the engine.

•Clean the snow thrower thoroughly after each use.

WARNING: Do not operate this snow thrower on gravel as loose gravel can easily be picked up and thrown by the auger, causing injury to people around and/or damage to the snow thrower.

SB 45 specifications

The White Outdoor SB 45 is a versatile and robust snow blower designed for residential use, making it ideal for homeowners who need an efficient solution for snow removal during winters. With an emphasis on performance and durability, the SB 45 is equipped with features that ensure effective snow clearing and ease of use.

One of the standout features of the SB 45 is its powerful engine. Typically powered by a reliable four-stroke engine, the snow blower delivers considerable torque and operational efficiency. This allows it to tackle heavy snow accumulations and icy conditions, making it suitable for a variety of winter climates.

The SB 45 is designed with an adjustable snow throwing distance, which empowers users to control where the snow is discharged. This is achieved through a simple lever system that adjusts the direction of the chute, allowing for precise snow placement without the need for additional manual effort.

Another key technology integrated into the SB 45 is its two-stage snow removal system. The first stage involves an auger that breaks up the snow, while the second stage uses an impeller to throw the snow out of the chute. This two-stage system ensures that even compacted snow is efficiently cleared, making the machine more effective than single-stage models.

The construction of the SB 45 features durable materials and a robust build that can withstand the rigors of winter use. The steel auger and heavy-duty frame contribute to its longevity, while also providing the strength needed to navigate through tough snow conditions.

Ease of maneuverability is another important aspect of the SB 45. The snow blower comes with large all-terrain tires that offer excellent traction, allowing it to navigate icy sidewalks and driveways with ease. Additionally, the machine's compact size and lightweight design enhance its portability, ensuring that it can be stored conveniently when not in use.

Convenience features such as a self-propelled drive system allow users to operate the snow blower without the need for excessive physical effort. Multiple speed settings ensure that users can adjust the speed according to their preference and the snow conditions.

Overall, the White Outdoor SB 45 is a reliable and efficient snow blower that combines power, durability, and user-friendly features. Its advanced technologies and thoughtful design make it a valuable tool for anyone looking to keep their property clear of snow during the winter months.