Woods Equipment SB84S, SB54S Mouinting Hydraulic Chute DEFLEC- TOR Figure, Install Wiring Harness

Page 24

MOUINTING HYDRAULIC CHUTE DEFLEC- TOR (FIGURE 25)

1.Fasten cylinder (1) to discharge chute (8) using hardware (6) and (7). Do not over tighten.

2.Fasten elbows (4) to cylinder (1).

3.Fasten hoses (8) to elbows (4).

4.Fasten adapters (5) to hoses (8).

5.Fasten restrictor (3) to adapter (5).

6.Fasten couplers (2) to adapter (5) and restrictor

(3).

1.Hydraulic Cylinder

2.Male Coupler

3.Swivel Restrictor

4.Elbow

5.1/2 NPTF x 1/2 NPTM Adapter

6.3/8 NC Lock Nut

7.3/8 NC x 1-3/4 HHCS

8.1/4 Hydraulic Hose

Figure 23. Hydraulic Chute Deflector Installation

MOUNTING ELECTRIC CHUTE ROTATOR OPTION (FIGURE 25)

1.Remove rotator sprocket from lower hitch pin. Position rotator sprocket in square opening on chute adapter with hole facing towards hitch. Install shaft (7) into rotator sprocket (36) using roll pin (6). Make sure second hole on shaft is facing towards hitch.

2.Fasten rotary actuator (1) to mounting bracket (3) using hardware from actuator.

3.Fasten mounting bracket (3) and actuator (1) to upper three point channel using cap screws (12), link (8), and nuts (13). Leave hardware loose (See Figure 24).

12.3/8 NC x 4 HHCS

13.3/8 NC Locknut

Figure 24. Motor Mount Position 6.62" from Front

4.Fasten coupler (4) to shaft (7) with roll pin (6).

5.Slide rotary actuator and channel assembly into coupler (4) and attach with roll pin (6). Tighten loose hardware.

Install Wiring Harness

6.Attach connector "A" to the rotary actuator (1), (12" long from splice).

NOTE: Attach connector "B" to linear actuator on deflector, if equipped, (36" long from splice).

7.Tie the wire harness away from movable parts and pinching points using cable ties (5).

1.

Hydraulic Motor

8.

Mounting Link

2.

Wire Harness

9.

Spring Nut

3.

Mounting Bracket

10.

Thumb Screw

4.

Coupler

11.

Rotator Shield

5.

Cable Tie

12.

3/8 NC x 4 HHCS

6.

Roll Pin

13.

3/8 NC Lock Nut

7.

Shaft Rotator

36.

Rotator Sprocket

Figure 25. Electric Chute Rotator Installation

24 Assembly

MAN0869 (04/13/2011)

 

 

Image 24
Contents Snowblower Introduction To the DealerTable of Contents Specifications General InformationSafety Safety RulesTraining PreparationMaintenance Storage Safety & Instructional Decals Be Careful Operation OperationPrincipal Components Tractor Requirements Driveline AttachmentShortening Driveline Machine BREAK-INAfter operating for 1/2 hour After operating for 5 to 10 hours Shear Bolts Operating RequirementsAdjusting Discharge Chute Position TransportingCleaning PRE-OPERATION Check List Owners ResponsibilityOwner Service Owner ServiceService and Maintenance Intervals Lubrication InformationDriveline Shear Bolt Replacement Chain MaintenanceDischarge Chute Lubrication GearboxSkid Shoes PTO Driveline Guard Walterscheid DrivelineComer Driveline Trouble Shooting Problem Problem Causes Suggested SolutionAssembly Assembly InstructionsInstall Hand Crank Figure Dealer SET-UP InstructionsInstall Discharge Chute Figure Install Discharge ChuteHydraulic Chute Rotator Installation Mounting Hydraulic Chute ROTA- TOR Option FigureInstall Wiring Harness Mouinting Hydraulic Chute DEFLEC- TOR FigureMounting Electric Chute Rotator Option Figure Mounting Electric Chute Deflec TOR Figure Dealer Check Lists Dealer Check ListsPRE-DELIVERY Check List Delivery Check ListSnowblower PartsSB54S, SB64S Subcompact Snowblower Assembly SB54S, SB64S Subcompact Snowblower Parts List Part QTY DescriptionSB74C, SB84C Compact Snowblower Assembly SB74C, SB84C Compact Snowblower Parts List Hand Crank AssemblyGearbox Assembly Comer Shear Bolt Drive Assembly Optional SB54S, SB64SSB74C, SB84C Walterscheid Drive Assembly Optional SB54S, SB64S, SB74C, SB84CHydraulic Chute Rotator Optional Hydraulic Chute Deflector OptionalElectric Chute Rotator Optional Electric Chute Deflector OptionalBolt Torque Chart SAE Series Torque ChartAppendix Metric SeriesBolt Size Chart AbbreviationsWarranty Rev /3/2011 MAN0826 Woods Equipment Company

SB84S, SB54S, SB74S, SB64S specifications

Woods Equipment Company has established itself as a leader in the manufacturing of high-quality landscape equipment, and the SB series of landscape rakes—specifically the SB64S, SB74S, SB54S, and SB84S—stand out for their exceptional performance and innovative features.

The SB series is designed to meet the needs of both residential and commercial users. These models range in width from 54 inches to 84 inches, allowing for versatility in handling various tasks, whether you're maintaining a small garden or clearing a large lot. The difference in size also caters to different tractor sizes and horsepower ratings, making it easier for users to select a rake that fits their specific requirements.

A notable feature of the SB series is its durable construction. Built from high-strength steel, these rakes can withstand rigorous use in various environments. The rakes are further equipped with heavy-duty tines that are engineered to be resilient against breakage while providing optimal soil leveling and debris clearing performance.

The SB rakes utilize a patented Quick-Tatch mounting system. This system allows for fast and easy attachment and detachment from tractors, reducing downtime and enhancing productivity. Additionally, the rakes can be adjusted to various angles, enabling users to efficiently handle different tasks such as grading, levelling, or scarifying soil.

One of the key characteristics of the SB64S, SB74S, SB54S, and SB84S models is their ergonomic design. The rakes are built with user-friendly controls that facilitate operation. Operators can change the angle and height with ease, which contributes to overall efficiency while reducing the physical strain typically associated with manual adjustments.

The rakes also feature a heavy-duty frame that supports consistent performance across various job conditions, whether working on flat ground or uneven terrains. Enhanced stability during operation means users can trust that the rake will provide uniform results without compromising the integrity of the landscape.

Another technological advantage of the SB series is its versatility in compatible attachment options, which allows users to employ the rake for various applications beyond standard landscaping, including gravel leveling and road maintenance.

In conclusion, the Woods Equipment SB64S, SB74S, SB54S, and SB84S rakes offer a combination of strength, technology, and user convenience, making them essential tools for landscape management. Their wide range of sizes and features ensures that there is a suitable option for every need, allowing for efficient and effective work across diverse environments.