Yard-Man 31AE573H401, 31AE553F401 manual Important Safe Operation Practices, Training, Preparation

Page 2

SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

WARNING: THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS WHICH, IF NOT FOLLOWED, COULD ENDANGER THE PERSONAL SAFETY AND/OR PROPERTY OF YOURSELF AND OTHERS. READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE YOUR SNOW THROWER. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. WHEN YOU SEE THIS SYMBOL- HEED ITS WARNING.

WARNING: The Engine Exhaust from this product contains chemicals known to

the State of California to cause cancer, birth defects or other reproductive harm.

DANGER: Your snow thrower was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. If you violate any of these rules, you may cause serious injury to yourself or others.

1. TRAINING

Read this operators manual carefully in its entirety before attempting to assemble or operate this machine. Be completely familiar with the controls and the proper use of this machine before operating it. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

Never allow children under 14 years old to operate a snow thrower. Children 14 years old and over should only operate snow thrower under close parental supervision. Only persons well acquainted with these rules of safe operation should be allowed to use your snow thrower.

No one should operate this unit while intoxicated or while taking medication that impairs the senses or reactions.

Keep the area of operation clear of all persons, especially small children and pets.

Exercise caution to avoid slipping or falling, especially when operating in reverse.

2.PREPARATION

Thoroughly inspect the area where the equipment is to be used and remove all door mats, sleds, boards, wires and other foreign objects.

Disengage all clutches and shift into neutral before starting engine.

Do not operate equipment without wearing adequate winter outer garments. Do not wear jewelry, long scarfs or other loose clothing which could become entangled in moving parts. Wear footwear which will improve footing on slippery surfaces.

Before working with gasoline, extinguish all cigarettes and other sources of ignition. Check the fuel before starting the engine. Gasoline is an extremely flammable fuel. Do not fill the gasoline tank indoors, while the engine is running, or until

engine has been allowed to cool at least two minutes. Replace gasoline cap securely and wipe off any spilled gasoline before starting the engine as it may cause a fire or explosion.

Use a grounded three wire plug-in for all units with electric drive motors or electric starting motors.

Adjust collector housing height to clear gravel or crushed rock surface.

Never attempt to make any adjustments while engine is running (except where specifically recommended by manufacturer).

Let engine and machine adjust to outdoor temperature before starting to clear snow.

Always wear safety glasses or eye shields during operation or while performing an adjustment or repair, to protect eyes from foreign objects that may be thrown from the machine in any direction.

3.OPERATION

Do not put hands or feet near or under rotating parts. Keep clear of discharge opening and auger at all times.

Exercise extreme caution when operating on or crossing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic. Do not carry passengers.

After striking a foreign object, stop the engine, remove wire from spark plug, and thoroughly inspect the snow thrower for any damage. Repair the damage before restarting and operating the snow thrower.

If the snow thrower should start to vibrate abnormally, stop the engine and check immediately for the cause. Vibration is generally a warning of trouble.

Stop engine whenever you leave the operating position, before unclogging the collector/impeller housing or discharge guide, and making any

2

Image 2
Contents Important Read Safety Rules and Instructions Carefully MTD Products INC. P.O. BOX 368022 CLEVELAND, OhioPreparation Important Safe Operation PracticesTraining OperationMaintenance and Storage Safety Labels found on your unitUnpacking the Snow Thrower Finding Snow Thrower Model NumberCalling Customer Support SET-UP Instructions Final Adjustments Auger Drive ClutchTraction Drive Clutch and Shift Lever Skid ShoeControls To Start Engine OperationGAS and OIL FILL-UP To Stop EngineTo Engage Augers To Engage DriveTo Steer Snowthrower Tire PressureAdjustments Lubrication Shave Plate and Skid Shoes MaintenanceAugers Replacing BeltAuger drive belt from the front auger pulley Changing Friction Wheel Rubber Drive BeltOFF-SEASON Storage Trouble Shooting Guide Trouble Possible Causes Corrective ActionRepair Parts Ref. No Codes below. Please add the applicable color code Cable Guide Page 151 2732 Yard-Man Green Yard-Man Yellow0674 Powder Black Wheel Assembly Yard-Man Green Yard-Man Yellow 0674 Powder Black 0637 Optional Parts Tire Chain Part NumberMANUFACTURER’S Limited Warranty for Other Warranties

31AE553F401, 31AE573H401 specifications

The Yard-Man 31AE573H401 and 31AE553F401 are two exceptional garden tractors designed to cater to the needs of homeowners and gardening enthusiasts alike. These machines combine powerful performance with innovative features to make lawn care and maintenance a breeze.

One of the standout characteristics of both models is their robust engine performance. The Yard-Man 31AE573H401 is equipped with a reliable 500cc engine, while the 31AE553F401 comes with a slightly smaller yet powerful engine. This ensures that users have the horsepower necessary to tackle tough mowing tasks and maintain even large properties efficiently. With electric start options available, both models ensure a hassle-free start-up, eliminating the stress of manual pulls.

A defining feature of these tractors is their versatile cutting systems. Both the 31AE573H401 and the 31AE553F401 feature a durable 42-inch cutting deck, designed to deliver clean and precise cuts with different height adjustments, allowing users to customize their lawn's appearance. The cutting deck design enhances maneuverability, enabling users to navigate around obstacles such as trees and flower beds while maintaining an even cut.

User comfort is a significant consideration in both models. They come with a comfortable, high-back seat that provides ample support during longer mowing sessions, reducing fatigue. The ergonomic controls are conveniently placed, ensuring that operators can easily adjust speed and cutting height without taking their hands off the steering wheel.

Equipped with advanced technologies, these tractors offer exceptional durability and ease of maintenance. The reinforced frame construction enhances stability and longevity, while easily accessible maintenance points simplify routine care. The onboard diagnostics notify users of potential issues before they become major problems, which enhances the overall reliability of the machines.

Additionally, both models feature a hydrostatic transmission that allows for smooth acceleration and effortless operation. This technology provides seamless control, enabling users to navigate various terrains without the need for shifting gears manually.

In summary, the Yard-Man 31AE573H401 and 31AE553F401 are top-tier garden tractors that embody reliability, comfort, and innovative features. Whether it's mowing a vast lawn or maneuvering through tight spaces, these machines make the task efficient and enjoyable. Ideal for homeowners seeking a dependable solution for lawn maintenance, these tractors are a valuable addition to any gardening equipment arsenal.