Yard Machines E6C0F, E610E, E660G Adjustments, Chute Assembly Adjustment, Auger Control Adjustment

Page 10

SECTION 6: ADJUSTMENTS

WARNING: NEVER attempt to clean chute or make any adjustments while engine is running. Refer to label in Figure 2 in safety section.

CHUTE ASSEMBLY ADJUSTMENT

The distance snow is thrown can be adjusted by adjusting the angle of the chute assembly. The sharper the angle, the shorter the distance snow is thrown. See Figure 13.

To adjust chute assembly, loosen the hand knob. Pivot the top of the chute assembly to position desired. Retighten the hand knob.

Hand Knob

Figure 13

Chute Directional Control

Support Bracket Adjustment

If the spiral at the base of the chute directional control isn’t fully engaging with the notches in the lower chute assembly, the support bracket can be adjusted inward or outward as follows:

1.Loosen, but do NOT remove the two hex nuts which secure the chute directional control support bracket to the snow thrower housing. See Figure 14.

 

Spiral

Hex Nuts

Support

 

Bracket

Figure 14

2.Adjust the support bracket inward or outward so that the spiral is fully engaged in the notches on the chute before retightening the hex nuts.

AUGER CONTROL ADJUSTMENT

To adjust the auger control, refer to FINAL ADJUST- MENTS in SECTION 4: ASSEMBLY.

SHIFT ROD ADJUSTMENT

1.Remove hairpin clip and slide shift rod connec- tor up to separate upper and lower shift rod. See Figure 15.

2.Place shift lever in sixth (6) position or fastest forward speed.

3.Rotate shift arm assembly counter clockwise as far as it will go.

4.Thread the upper shift rod on the ferrule to align upper shift rod elbow with lower shift rod hole.

5.Insert cotter pin and slide shift rod connector down. Tap to secure.

 

Shift

 

Lever

Upper

Ferrule

Shift Rod

 

Shift Rod

 

Connector

 

Lower

Hairpin

Clip

Shift Rod

 

 

Shift Arm

 

Assembly

Figure 15

CARBURETOR ADJUSTMENT

WARNING: If any adjustments are made to the engine while the engine is running (e.g. carburetor), keep clear of all moving parts. Be careful of heated surfaces and muffler.

10

Image 10
Contents OPERATOR’S Manual Finding Your Model Number Calling Customer SupportPreparation Important Safe Operation PracticesTraining OperationMaintenance and Storage Shut OFF Engine Before Unclogging Discharge ChuteAssembly AssemblyUnpacking Final Adjustments Skid Shoe AdjustmentOperation GAS and OIL FILL-UP Throttle ControlBefore Starting To Start EngineTo Engage Augers To Stop EngineTo Engage Drive Operating TipsAuger Control Adjustment AdjustmentsChute Assembly Adjustment Shift ROD AdjustmentDrive Wheel MaintenanceTraction Control Adjustment Lubrication Chute Directional ControlService Belt Removal and Replacement Auger Belts ScrewsDrive Belt Changing Friction Wheel RubberTrouble Shooting Guide OFF-SEASON StoragePage Gear Assembly Blower Housing Part Description Item #21 Goes to Ground Wire Light Assembly Part Description Frame Assembly Wheel Assemblies Model Size Engine and V-Belts E640F, E660G, E6C0F Page Page MANUFACTURER’S Limited Warranty for

E600E, E640F, E660G, E610E, E6C0F specifications

Yard Machines has built a solid reputation for producing robust and reliable lawn equipment, and the E600E, E6C0F, E640F, E610E, and E660G models are no exception. Each model combines advanced features and innovative technologies, making them ideal for homeowners seeking efficient lawn care solutions.

The Yard Machines E600E is designed for exceptional performance. It features a powerful engine that delivers reliable starting and consistent cutting power. The compact design allows for easy maneuverability around tight spaces, while its adjustable cutting height ensures a customized finish for various types of grass. The E600E also includes a mulching capability that recycles grass clippings, promoting a healthier lawn.

The E6C0F model stands out with its user-friendly controls, allowing even novice users to handle it with ease. This model incorporates a self-propelled system, which reduces user fatigue during extended periods of use. The durable construction and high-quality materials used in the E6C0F ensure longevity, allowing homeowners to tackle their lawns season after season without the worry of wear and tear.

Moving to the E640F, this model is equipped with an advanced cutting deck technology that delivers a cleaner cut and better grass management. The E640F’s ergonomic design enhances comfort, featuring a padded handle and lightweight body. Additionally, this model offers various speed settings to adapt to different mowing conditions, ensuring an efficient and effective mowing experience.

The E610E model is recognized for its versatility. With multiple attachment options, the E610E can easily switch from mowing to other tasks, such as leaf collection or aeration. Its robust engine ensures it can handle tougher jobs, giving homeowners the flexibility needed for year-round lawn maintenance.

Lastly, the E660G is a powerhouse in the Yard Machines lineup. It comes with a high-capacity bagging system that reduces the frequency of emptying during mowing sessions. The E660G also features all-wheel drive, providing superior traction on uneven terrain. Its sleek design and enhanced aesthetics make it a stylish addition to any tool shed.

In summary, the Yard Machines E600E, E6C0F, E640F, E610E, and E660G models are engineered to meet various lawn care needs, blending performance, efficiency, and ease of use. Whether for simple residential mowing or more complex landscaping tasks, these mowers prove to be invaluable assets for any homeowner. Each model showcases Yard Machines' commitment to quality and innovation in lawn care technology.