Throttle Control, Before Starting | Yard Machines E640F, E6C0F

THROTTLE CONTROL

The throttle control is located on the engine. It regu- lates the speed of the engine. See Figure 10.

BEFORE STARTING

WARNING: Observe all Warning Labels on the snow thrower prior to use. See Figure 2.

Your snow thrower is shipped with oil; however, you must check the oil level before operating. Be careful not to overfill.

The spark plug wire was disconnected for safety. Attach spark plug wire to spark plug before starting.

GAS AND OIL FILL-UP

Check oil level and add oil if necessary. Service the engine with gasoline as instructed in the separate engine manual packed with your snow thrower. Read instructions carefully.

WARNING: Never fill fuel tank indoors. Never fill fuel tank with engine running or while engine is hot. Do not smoke when filling fuel tank.

TO START ENGINE

1.Attach spark plug wire to spark plug. Make cer- tain the metal loop on end of the spark plug wire (inside the boot) is fastened securely over the metal tip on the spark plug. See Figure 11.

Metal Loop

on Spark

Plug Wire

Rubber Boot

Figure 11

2.Make certain the fuel shut-off valve is in the OPEN (vertical) position.

3.Make certain the auger and traction controls are in the disengaged (released) position.

4.Move throttle control up to FAST position. Insert ignition key into slot. Be certain it snaps into place. Do not turn key. See Figure 12.

Note: Engine will not start unless ignition key is inserted into ignition slot in carburetor cover. Do not turn ignition key.

Recoil Starter:

5.Rotate choke knob to FULL choke position (cold engine start).

6.If engine is warm, place choke in OFF position instead of FULL.

7.Push primer button three or four times for cold engine start.

8.If engine is warm, push primer button once only.

NOTE: Always cover vent hole in primer button when pushing. Additional priming may be necessary for first start if temperature is below 15 degrees Fahr- enheit.

9.Grasp starter handle and pull rope out slowly, until it pulls slightly harder. Let rope rewind slowly.

10.Pull starter handle rapidly. Do not allow handle to snap back. Allow it to rewind slowly while keep- ing a firm hold on the starter handle.

11.Repeat step 10 until engine starts.

12.As engine warms up and begins to operate evenly, rotate choke knob slowly to OFF position. If engine falters, return to FULL choke, then slowly move to OFF position.

Spark	Switch	Starter Button
Spark	Box	(If Equipped)
Plug
	Choke	Primer
		Rope Starter
Ignition		Handle
Ignition	Throttle
Key	Throttle
Key	Control
	Control

Figure 12

Electric Starter: (If Equipped)

WARNING: The electric starter is equipped with a three-wire power cord and plug, and is designed to operate on 120 volt AC household current. It must be properly grounded at all times to avoid the possibility of electric shock which may cause injury to the operator.

E600E, E640F, E660G, E610E, E6C0F specifications

Yard Machines has built a solid reputation for producing robust and reliable lawn equipment, and the E600E, E6C0F, E640F, E610E, and E660G models are no exception. Each model combines advanced features and innovative technologies, making them ideal for homeowners seeking efficient lawn care solutions.

The Yard Machines E600E is designed for exceptional performance. It features a powerful engine that delivers reliable starting and consistent cutting power. The compact design allows for easy maneuverability around tight spaces, while its adjustable cutting height ensures a customized finish for various types of grass. The E600E also includes a mulching capability that recycles grass clippings, promoting a healthier lawn.

The E6C0F model stands out with its user-friendly controls, allowing even novice users to handle it with ease. This model incorporates a self-propelled system, which reduces user fatigue during extended periods of use. The durable construction and high-quality materials used in the E6C0F ensure longevity, allowing homeowners to tackle their lawns season after season without the worry of wear and tear.

Moving to the E640F, this model is equipped with an advanced cutting deck technology that delivers a cleaner cut and better grass management. The E640F’s ergonomic design enhances comfort, featuring a padded handle and lightweight body. Additionally, this model offers various speed settings to adapt to different mowing conditions, ensuring an efficient and effective mowing experience.

The E610E model is recognized for its versatility. With multiple attachment options, the E610E can easily switch from mowing to other tasks, such as leaf collection or aeration. Its robust engine ensures it can handle tougher jobs, giving homeowners the flexibility needed for year-round lawn maintenance.

Lastly, the E660G is a powerhouse in the Yard Machines lineup. It comes with a high-capacity bagging system that reduces the frequency of emptying during mowing sessions. The E660G also features all-wheel drive, providing superior traction on uneven terrain. Its sleek design and enhanced aesthetics make it a stylish addition to any tool shed.

In summary, the Yard Machines E600E, E6C0F, E640F, E610E, and E660G models are engineered to meet various lawn care needs, blending performance, efficiency, and ease of use. Whether for simple residential mowing or more complex landscaping tasks, these mowers prove to be invaluable assets for any homeowner. Each model showcases Yard Machines' commitment to quality and innovation in lawn care technology.