Cub Cadet 826 4x4 manual Final Adjustments, Auger Control Adjustment, Skid Shoe Adjustment

Page 6

Cable Guide

Figure 5

Final Adjustments

Auger Control Adjustment

Check the adjustment of the auger control as follows:

•Push forward on the auger control until the small rubber bumper contacts the upper handle. There should be slack in the cable. See Figure 6.

•Release the auger control. The cable should be

straight. Make certain you can depress the auger control against the left handle completely.

If adjustment is necessary, proceed as follows:

•Loosen the jam nut and thread the cable in (for less slack) or out (for more slack) as necessary. See Figure 6.

•Recheck the adjustment before retightening the jam nut against the cable.

Auger

Control

Z-End

Jam Nut

Auger

Control Cable

Figure 6

Traction Control and Shift Lever Adjustment

To check the adjustment of the traction control and shift lever, proceed as follows:

•Move the shift lever into sixth (6) position.

a.With the traction control (refer to Figure 8) released, squeeze in triggers and gently push the snow thrower forward, then pull it back. Disregarding the overall weight of the

snow thrower, the machine should otherwise move freely.

b.Engage the traction control and attempt to move the machine both forward and rearward. You should experience resistance as the wheels should not be turning.

•Move the shift lever into the fast reverse (R2) position and repeat the previous steps (a & b).

If you experienced resistance either when repositioning the shift lever from 6 to R2 or when attempting to move the machine forward or rearward with the traction control released, your snow thrower’s traction control is in need of adjustment and you should NOT operate the machine before completing the adjustment as follows:

•Loosen the jam nut on the traction control cable and UNTHREAD the cable one full turn.

•Recheck the adjustment.

•Retighten the jam nut to secure the cable when correct adjustment is reached.

If the machine can be moved freely both forward and rearward when the traction control fully depressed, proceed as follows:

•Loosen the jam nut on the traction drive cable and THREAD the cable in one full turn.

•Recheck the adjustment and repeat adjustment as necessary.

•Retighten the jam nut to secure the cable when correct adjustment is reached.

NOTE: If you are uncertain that you have reached the correct adjustment, refer to Traction Control Adjust- ment in Adjustment Section.

Skid Shoe Adjustment

The space between the shave plate and the ground can be adjusted by repositioning the skid shoes found on either side of the snow throwers auger housing. For close snow removal, place skid shoes in the low position. Use middle or high position when area to be cleared is uneven. See Figure 7.

IMPORTANT: It is NOT recommended that this snow thrower be operated on a gravel surface, as loose stones can be easily picked up and thrown by the machine. If you must operate on a gravel surface, ALWAYS adjust the skid shoes into the HIGH position to allow the shave plate maximum clearance.

Adjust skid shoes as follows:

•Loosen, but do NOT remove, the three hex nuts which fasten the skid shoe to the auger housing.

•Raise or lower the skid shoe to desired position.

NOTE: Make certain the entire base of both skid shoes are against the ground to avoid uneven wear on the skid shoes. When one side does wear out, the skid shoes are reversible.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents OPERATOR’S Manual Table of Contents Preparation Important Safe Operation PracticesTraining OperationMaintenance And Storage Your ResponsibilityUnpacking AssemblyAssembling Your Snow Thrower Loose PartsTraction Control and Shift Lever Adjustment Final AdjustmentsAuger Control Adjustment Skid Shoe AdjustmentKnow Your Snow Thrower Tire PressureOperating Your Snow Thrower Recoil Starter To Start EngineElectric Starter To Stop EngineChute Assembly Adjustment Skid Shoe AdjustmentAuger Control Adjustment Traction Control AdjustmentShift Rod Adjustment Maintaining Your Snow ThrowerLubrication Engine Belt Removal And ReplacementServicing Your Snow Thrower AugersDrive Belt Servicing Friction Wheel Rubber Off-season Storage Trouble Shooting Guide Trouble Possible Causes Corrective ActionModel DescriptionModel Description Model 22 -0473 Sprocket 714-0104 Cotter Pin 714-0474 716-0102 Model Model For Reference Only Part Description Page Page MANUFACTURER’S Limited Warranty for

826 4x4 specifications

The Cub Cadet 826 4x4 is a powerful and versatile snow blower designed for homeowners who face harsh winter conditions. It combines robust engineering with user-friendly features, making snow removal a more manageable task. This machine is equipped with a 26-inch clearing width, allowing it to tackle significant snow accumulations efficiently.

One of the standout features of the Cub Cadet 826 4x4 is its 4-wheel drive capability. This ensures that users can navigate snowy terrain with ease, providing enhanced traction and stability on slopes and uneven surfaces. The hydrostatic transmission allows for smooth speed adjustments and effortless maneuvering. This feature is particularly beneficial when operating in tight corners or delicate areas where precision is essential.

The snow blower is powered by a reliable 2-stage engine, which generates ample power for heavy-duty snow clearing. The two-stage system means that after the auger gathers snow, it is thrown out of the discharge chute with significant force, making it ideal for dealing with packed snow and deep drifts. The adjustable chute also allows users to direct the snow far away from the cleared area, preventing it from being blown back onto already cleared surfaces.

In terms of comfort, the Cub Cadet 826 4x4 prioritizes ease of use. It features heated hand grips that keep operators warm during extended periods of cold weather. Moreover, the large, easy-to-operate controls are designed to minimize fatigue, allowing users to focus on the job at hand. The machine’s generous fuel tank capacity ensures longer operation times without frequent refueling, adding to its convenience.

Durability is another key characteristic of the Cub Cadet 826 4x4. Built with high-grade materials, it is designed to withstand the rigors of winter use. The high-impact, snow-resistant construction ensures longevity, making it a smart investment for homeowners looking to manage snow effectively year after year.

In summary, the Cub Cadet 826 4x4 is an exceptional snow blower that combines power, technology, and user comfort. Its robust features make it suitable for tackling even the most challenging winter conditions, ensuring users can clear their paths quickly and efficiently. With its combination of durability, performance, and ease of use, the Cub Cadet 826 4x4 is a top choice for anyone looking to conquer snow this winter.
Top Page Image Contents