Craftsman 486.24838 manual Installing CLUTCH/IDLER Assembly, Tractorsclutch ARM Engagement ROD

Page 15

INSTALLING CLUTCH/IDLER ASSEMBLY

This section covers the installation of the Clutch/Idler assembly to tractors with attachment clutches that are either rod operated (p 15), cable operated (p. 17) or electric (p. 19) Use the appropriate instructions for your tractor.

ROD OPERATED MANUAL ATTACHMENT CLUTCH

STEP 29: (SEE FIGURE 29)

Move the attachment dutch lever on the dash pane{ to the disengaged (down) position.

Screw the trunnion (11)onto the end of the snow thrower engagement rod.

Locate the c_utcl_arm (where the mower clutch rod was connected) underneath the right hand side the tractor, iust to the inside of the suspension arm. if there is an extension attached to the clutch lever, the extension, bolt and nut must be removed and stored with the mower deck

iMPORTANT: Re-attach the extension to the clutch lever before reinstalling the mower deck

Position the engagement rod to the inside of the c_utch arm and insert the ddl{ed end of the rod through the arm Secure with a 5/64" hairpin cotter (JJ).

_, TRACTOR'SCLUTCH ARM

ENGAGEMENT ROD

/(H)

SUSPENSION ARM

5164" HAIRPIN

COTTER (JJ)

REMOVE EXTENSION,

BOLT AND NUT

(IF PRESENT)

FIGURE 29

RIGHT SIDE VIEW

STEP 30: (SEE FIGURE 30)

*Attach the two suspension arms to the inside of the clutch/idler assembly using two 5/16" x 3/4" hex bolts

(E), 5/16" washers (U) and 5/16" nylock nuts (CC) for each _rm. Place the washers between the arms and

the assembly frame

5/16" NYLOCK

5/16" x 3/4"

NUT (CC) 5/16" WASHER (U)

HEX BOLT (E)

FIGURE 30

 

STEP 31: (SEE FIGURE 31)

Two different length drive belts are included with your snow thrower. Tractors with manual attachment clutches and dual front deck suspension brackets use the 55" drive belt with #46989 printed on the outside of the belt. DO NOT USE timeother belt

SlightEy _oosen the hex bolt next to the flat idler pulley Install the drive belt down between the hex bolt and the flat idler pulley with the flat side of the belt against the pulley. Retighten the hex bolt

Loop the belt around the large v-pulley, placing it between the v-pulley and the hex bolt next to the pulley

HEX BOLTS

FLAT IDLER

 

PULLEY

\

 

\

 

\

 

\

 

(#46989)

DRIVE BELT

FIGURE 31

Did you choose the correct drive belt for your tractor? Us{ng the wrong length be{t may cause premature bearing or belt failure

15

Image 15
Contents Crqftsnqn Sears, Roebuck and Co., D817WA, Hoffmn Estates, IL Exercisecautionatalltimes,whenusingpowerequipment Shown Actual SiZE Not Shown Actual SiZEQTY Description Belt,AugerAttachedtoHousingAssembly Additional Items Required Engine Mounting PlateRight Bide View 16 x 3/4 Manual Attachment ClutchIf your tractor has an electric attachment clutch go to on See FigureAttach Clutch Idler Assemblyto Tractor Viewed from Left SidePulley Tractor Type t Deck SiZE Clutch Type LeftSEEFIGURE17 CLUTCH/IDLER Assembly Pulley Hairpin Cotter KK\ I Thread Forming 3 3/8 Lock See NoteRight WasherssOn Tractors With Foot Rest Brackets H.&NGERRight Side View Tractorsclutch ARM Engagement ROD Installing CLUTCH/IDLER AssemblyGo to on Carriage Bolt O Cotter PIN JJTractors Clutch Cable Hairpin Cotter See Figure Tractor Type Deck Size See TableKeeper Hairpin Cotter KK See FigureTrigger Assembly Chute Keeper HH Chute CrankROD Left 81DEVIEWTwist Installing the Attachment PIN Refer Sackto on Setting the Auger Belt Tension See FigureAttaching Weight Tray to Tractor Cross Attachingtogtgarden Tractors with aCC Tighten all loose bolts at this time OriginalAttach Reflectors to Rear Fender Attaching KEG to WeighttrayAlternate Instructions for Weigrttray see Figure HitchControlling Snow Discharge Skid Shoe65 on Customer ResponsibilitiesLubrication Check Scraper and Shoes for WearSpiral Augers Skid Shoe AdjustmentLift Release Cable Adjustment Clutch Disengagement AdjustmentParts to Remove AT END of Season Removing the Spiral Auger HousingProblem Cause CORRI=CTION Storage RecommendationsPage Page Page Repair Parts for Model 486.24838 42 Snowthrower QTY. Description Part QTY Description REE820 7879 QTY Description REE Part REF Part NO. noRepair Parts for Model Suggested Guide for Sighting Slopes for Safe Operation MY-HOME

486.24838 specifications

The Craftsman 486.24838 is a powerful and versatile tool, designed to meet the demands of both homeowners and professional landscapers. This versatile machine is particularly noted for its performance in lawn maintenance and is a favorite among gardening enthusiasts.

One of the key features of the Craftsman 486.24838 is its robust engine, which boasts impressive horsepower. This power is essential for tackling tough terrains and thick grass, ensuring reliable operation under various conditions. The engine is designed for efficiency, promoting fuel economy without sacrificing performance. It starts easily, providing users with a hassle-free experience every time they need to fire it up.

Another standout feature is the machine's cutting deck. The Craftsman 486.24838 is equipped with a wide, durable cutting deck that facilitates efficient mowing. This feature allows users to cover larger areas in less time, making it ideal for spacious lawns or commercial properties. The cutting height is adjustable, permitting users to customize their mowing experience to suit different grass types and lengths.

In addition to its powerful engine and cutting capabilities, the Craftsman 486.24838 incorporates cutting-edge technologies aimed at enhancing its usability. The unit comes with ergonomic handles that improve comfort during operation, reducing fatigue during prolonged use. The intuitive controls are easy to reach and operate, making it simple for users of all skill levels to navigate.

Moreover, the machine is equipped with high-quality, durable wheels that provide superior traction and stability on uneven terrain. This feature allows users to maintain control over the equipment, ensuring it can handle inclines and rough patches with ease.

The Craftsman 486.24838 is designed for longevity and user-friendly maintenance. The robust construction materials ensure that it withstands the rigors of regular use, while its easy-access maintenance points facilitate quick adjustments and upkeep.

Overall, the Craftsman 486.24838 is an excellent choice for those looking for a reliable, efficient, and user-friendly landscaping tool. It combines powerful performance with advanced features, making it suitable for both residential and commercial landscaping tasks. Whether you're maintaining a large estate or a modest backyard, this machine is designed to deliver results.