Craftsman 486.24838 manual Alternate Instructions for Weigrttray see Figure, Hitch

Page 26

ALTERNATE INSTRUCTIONS FOR WEIGRTTRAY STEP 83: (SEE FIGURE 61)

Block up the rea_ of the tractor to allow removal of rear wheels.

Remove the rear wheels from the axle, retaining the square key and all other parts for reassembly Remove the hex bolt from the top hole in the side of the tractor frame. If no bolt is present and the hole is

unthreaded, screw a 3/8" x 3/4" self threading bolt (H) into and out of the hole to create threads

Assemble the notched end of each side brace to the top hole in the each side of the tractor frame, using a 3/8-18 x 1" slotted truss head bolt (J) for each brace

*Assemble the weight tray to the side braces as instructed in step 80 or 62 on pages 24 and 25.

*Reassemble the wheels onto the axle, making sure to

reassemble the square keys and all other parts which were removed

DOLE WITH HEX

BO_HEMOVED

3/8" x 1" SLOTTED mUSS HEAD DOLT (J)

SQUARE KEY

t

TRACTOR

HITCH

SIDE BRACE

 

FIGURE 81

 

ATTACHING KEG TO WEIGHTTRAY

STEP 64: (SEE FIGURE 62)

*Place the ptastic keg on the weight tray and fill with approximately 75 Ibs. of dry sand.

*Secure the keg with the rubber tarp strap (FF) hooked into the holes in the cross brace.

/

!

TARP STRAP (FF)

FIGURE 62

ATTACH REFLECTORS TO REAR FENDER

STEP 68: (SEE FIGURE 63)

•If your tractor is not equipped with rear reflectors, assemble the supplied rear reflectors (QQ) to the rear fender Place the reflectors as close to the bottom of

the fender and as far apart as the shape of the fender will allow.

\

REAR REFLECTORS (QQ)

FIGURE 63

CHECKLIST

Before you operate your snow thrower, please review

the following checklist to help ensure that you will obtain the best performance from your snow thrower.

•Make sure air assembly instructions have been completed with aH bolts and nuts properly tightened.

•Make sure the correct dbve belt was installed.

•Make sure the drive belt and auger belt are routed properly around pulleys and inside all belt keepers

•Check discharge chute for proper rotation

•Check operation of tilt control for upper chute

•Verify that the _ifthandle will lock into and release from the raised transport position. (Refer to the Service and Adjustments section.)

•Check skid shoe adjustment (Refer to the Service and Adjustments section.)

The following additional items are available from Sears to help enhance the performance of your snow thrower. See Accessories and Attachments on page 2.

•Tire chains which can be installed to improve traction

•Rear wheel weights which can be installed in addition to the rear weight tray to improve traction.

•Drift cutter bars which can be installed to help slice off the edges of tall drifts

•Snow Cab which can be installed to help protect against wind and blowing snow.

28

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Crqftsnqn Sears, Roebuck and Co., D817WA, Hoffmn Estates, IL Exercisecautionatalltimes,whenusingpowerequipment Not Shown Actual SiZE Shown Actual SiZEQTY Description Belt,AugerAttachedtoHousingAssembly Additional Items Required Right Bide View Engine MountingPlate See Figure Manual Attachment ClutchIf your tractor has an electric attachment clutch go to on 16 x 3/4Pulley Attach Clutch Idler Assemblyto TractorViewed from Left Side Left Tractor Type t Deck SiZE Clutch TypeCLUTCH/IDLER Assembly Pulley Hairpin Cotter KK SEEFIGURE17Washerss See NoteRight \ I Thread Forming 3 3/8 LockRight Side View On Tractors With Foot Rest BracketsH.&NGER Installing CLUTCH/IDLER Assembly Tractorsclutch ARM Engagement RODGo to on Tractors Clutch Cable Carriage Bolt OCotter PIN JJ Hairpin Cotter See Figure See Table Tractor Type Deck SizeHairpin Cotter KK See Figure KeeperTrigger Assembly Left 81DEVIEW Chute CrankROD Chute Keeper HHTwist Attaching Weight Tray to Tractor Installing the Attachment PIN Refer Sackto onSetting the Auger Belt Tension See Figure Original Attachingtogtgarden Tractors with aCC Tighten all loose bolts at this time CrossHitch Attaching KEG to WeighttrayAlternate Instructions for Weigrttray see Figure Attach Reflectors to Rear FenderSkid Shoe Controlling Snow DischargeCheck Scraper and Shoes for Wear Customer ResponsibilitiesLubrication 65 onClutch Disengagement Adjustment Skid Shoe AdjustmentLift Release Cable Adjustment Spiral AugersStorage Recommendations Removing the Spiral Auger HousingProblem Cause CORRI=CTION Parts to Remove AT END of SeasonPage Page Page Repair Parts for Model 486.24838 42 Snowthrower Part QTY Description REE QTY. Description820 7879 REF Part NO. no QTY Description REE PartRepair Parts for Model Suggested Guide for Sighting Slopes for Safe Operation MY-HOME

486.24838 specifications

The Craftsman 486.24838 is a powerful and versatile tool, designed to meet the demands of both homeowners and professional landscapers. This versatile machine is particularly noted for its performance in lawn maintenance and is a favorite among gardening enthusiasts.

One of the key features of the Craftsman 486.24838 is its robust engine, which boasts impressive horsepower. This power is essential for tackling tough terrains and thick grass, ensuring reliable operation under various conditions. The engine is designed for efficiency, promoting fuel economy without sacrificing performance. It starts easily, providing users with a hassle-free experience every time they need to fire it up.

Another standout feature is the machine's cutting deck. The Craftsman 486.24838 is equipped with a wide, durable cutting deck that facilitates efficient mowing. This feature allows users to cover larger areas in less time, making it ideal for spacious lawns or commercial properties. The cutting height is adjustable, permitting users to customize their mowing experience to suit different grass types and lengths.

In addition to its powerful engine and cutting capabilities, the Craftsman 486.24838 incorporates cutting-edge technologies aimed at enhancing its usability. The unit comes with ergonomic handles that improve comfort during operation, reducing fatigue during prolonged use. The intuitive controls are easy to reach and operate, making it simple for users of all skill levels to navigate.

Moreover, the machine is equipped with high-quality, durable wheels that provide superior traction and stability on uneven terrain. This feature allows users to maintain control over the equipment, ensuring it can handle inclines and rough patches with ease.

The Craftsman 486.24838 is designed for longevity and user-friendly maintenance. The robust construction materials ensure that it withstands the rigors of regular use, while its easy-access maintenance points facilitate quick adjustments and upkeep.

Overall, the Craftsman 486.24838 is an excellent choice for those looking for a reliable, efficient, and user-friendly landscaping tool. It combines powerful performance with advanced features, making it suitable for both residential and commercial landscaping tasks. Whether you're maintaining a large estate or a modest backyard, this machine is designed to deliver results.
Top Page Image Contents