Husqvarna 924SBE Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector

Page 15

SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before performing any service or ad- justments:

1.Be sure throttle is in STOP position.

2.Remove safety ignition key.

3.Make sure the augers and all moving parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute deflector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the deflector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deflector removed or damaged.

•To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 19)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a shoulder/shear bolt and hex nut. Should a for- eign object or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shoulder/shear bolt and spacer. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Connect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS

The impeller is secured to the impeller shaft with two (2) capscrew/shear bolts and hex nuts. Should a foreign object or ice become lodged in the impeller, the capscrews are designed to break, preventing damage to any other com- ponents. If impeller does not turn when auger control lever is engaged, check to see if the capscrews have sheared. To replace the capscrew/shear bolts:

15

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

4.Connect spark plug wire to spark plug.

1/4-20

1/4-20 x 1-5/8

1/4-20 x 2

LOCKNUT

CAPSCREW /

SHOULDER /

 

SHEAR BOLT

SHEAR BOLT

 

IMPELLER HUB

SPACER

 

 

 

IMPELLER

 

 

SHAFT

 

 

 

AUGER

 

 

HUB

1/4-20

 

 

LOCKNUT

AUGER HUB

AUGER SHAFT

FIG. 19

TO REMOVE BELT COVER (See Fig. 20)

1.Remove the two (2) screws securing belt cover to frame.

2.Remove belt cover.

•Replace belt cover by installing cover and screws and tighten securely.

 

BELT

 

COVER

FRAME

SCREWS

 

FIG. 20

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 924SBE Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerRemove Snow Thrower from Carton Install Speed Control ROD See Figs Install Traction Drive Control ROD See FigsUnfold Upper Handle Install Auger Control ROD See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Ignition KEY OperationKnow Your Snow Thrower PrimerRecoil auxiliary starter handle used for starting the engine Meets A.N.S.I. Safety RequirementsEngine HOW to USE Your Snow ThrowerStopping AugerUsing the CLEAN-OUT Tool See Fig To Throw Snow See FigTo Move Forward and Backward See Fig Before Starting the Engine Scraper BARTo Start Engine Snow Throwing Tips Before StoppingIf Recoil Starter has Frozen Lubrication MaintenanceGeneral Recommendations Before Each USEEngine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Other StorageTroubleshooting Service Notes Repair Parts Auger Housing / Impeller Assembly KEY Part Description Repair PartsControl Panel / Discharge Chute KEY Part Description Handles Repair Parts Drive Repair Parts Chassis / Engine / Pulleys KEY Part Description Wheels / Decals 532 40 Sion Tmita ILD NA SON ITP Eexc 4ON ITC ES Rantywar Tementsta

924SBE specifications

The Husqvarna 924SBE is a powerful and reliable snow blower designed for homeowners who need to tackle heavy snowfall and challenging winter conditions. Built with a mix of durability, efficiency, and innovative technology, this machine is engineered to offer superior performance in clearing snow from driveways and walkways with ease.

One of the main features of the Husqvarna 924SBE is its robust 208cc engine that provides ample power for effective snow removal. This engine is not only powerful but also designed for easy starting and consistent performance in low temperatures, ensuring that the snow blower can be relied upon even in the harshest winter conditions. The friction disk transmission enables smooth gear changes, allowing users to adjust the speed according to their needs, providing optimal control and ease of operation.

The 924SBE features a 24-inch clearing width and a 23-inch intake height, making it suitable for handling moderate to heavy snowfall. Its efficient auger system breaks up and collects snow quickly, while the impeller ensures effective throwing of snow up to 30 feet away, allowing users to clear their paths swiftly and without hassle. The adjustable chute and deflector allow for precise control over where the snow is thrown, making it easier to maneuver in tight spaces.

Another noteworthy technology of the Husqvarna 924SBE is its heated handgrips, which provide comfort to the operator during those long snow-clearing sessions. This feature ensures that users can maintain a firm grip on the controls without the discomfort of cold fingers. Additionally, the snow blower is equipped with LED headlights, which enhance visibility during early morning or late evening snow clearing tasks.

Comfort and convenience are further enhanced by the snow blower's sturdy construction and user-friendly design. The folding handlebar allows for easy storage and transportation, making it manageable for users with limited storage space. With its rugged tires, the Husqvarna 924SBE provides excellent traction on slippery surfaces, ensuring stability and ease of movement even in the most challenging snow conditions.

In summary, the Husqvarna 924SBE is a powerful snow blower that combines strength, technology, and user-friendly features. With its efficient snow-clearing capabilities, comfortable design, and reliable performance, this machine is an excellent choice for anyone looking to handle winter weather effectively. Whether clearing snow from a driveway, sidewalk, or patio, the Husqvarna 924SBE stands out as a dependable tool for winter readiness.
Top Page Image Contents