Husqvarna 924SBE owner manual Unfold Upper Handle, Install Speed Control ROD See Figs

Page 5

ASSEMBLY / PRE-OPERATION

NOTE: The multi-wrench may be used for assembly of the chute rotator head to snow thrower and making adjustments to the skid plates.

UNFOLD UPPER HANDLE

1.Raise upper handle to the operating position and tighten handle knobs securely.

INSTALL SPEED CONTROL ROD (See Figs. 1 and 2)

1.Remove plastic tie securing rod to lower handle.

2.Insert rod into speed control bracket and secure with retainer spring.

SPEED

CONTROL

ROD

PLASTIC TIE

UPPER

HANDLE

HANDLE

KNOB

LOWER

HANDLE

FIG. 1

SPEED CONTROL ROD

RETAINER

SPRING

SPEEDSPEED

CONTROL CONTROL

BRACKET LEVER

FIG. 2

INSTALL TRACTION DRIVE CONTROL ROD (See Figs. 3 and 4)

The traction drive control rod has the long loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into pivot bracket with loop opening down as shown.

2.With top end of rod positioned under left side of control panel, push rod down and insert top end of rod into hole in drive control bracket. Secure with retainer spring.

TRACTION DRIVE

CONTROL ROD

RUBBER

SLEEVE

LOOP

OPENING

DOWN

PIVOT

BRACKET

FIG. 3

TRACTION DRIVE

RETAINER

CONTROL LEVER

SPRING

TRACTION

DRIVE

CONTROL

ROD

DRIVE

CONTROL

BRACKET

FIG. 4

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 924SBE Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents Remove Snow Thrower from Carton Parts Packed Separately in Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Unfold Upper Handle Install Speed Control ROD See FigsInstall Traction Drive Control ROD See Figs Check Tire Pressure Install Auger Control ROD See FigsInstall Discharge Chute / Chute Rotater Head See Fig Know Your Snow Thrower OperationPrimer Ignition KEYRecoil auxiliary starter handle used for starting the engine Meets A.N.S.I. Safety RequirementsStopping HOW to USE Your Snow ThrowerAuger EngineTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigTo Throw Snow See Fig To Start Engine Before Starting the EngineScraper BAR If Recoil Starter has Frozen Snow Throwing TipsBefore Stopping General Recommendations MaintenanceBefore Each USE LubricationEngine CleaningTo Adjust Snow Thrower Height Service and AdjustmentsChute Deflector Shear Bolts See FigTo Replace Belts See Fig Other StorageTroubleshooting Service Notes Repair Parts Auger Housing / Impeller Assembly KEY Part Description Repair PartsControl Panel / Discharge Chute KEY Part Description Handles Repair Parts Drive Repair Parts Chassis / Engine / Pulleys KEY Part Description Wheels / Decals 532 40 Sion Tmita ILD NA SON ITP Eexc 4ON ITC ES Rantywar Tementsta

924SBE specifications

The Husqvarna 924SBE is a powerful and reliable snow blower designed for homeowners who need to tackle heavy snowfall and challenging winter conditions. Built with a mix of durability, efficiency, and innovative technology, this machine is engineered to offer superior performance in clearing snow from driveways and walkways with ease.

One of the main features of the Husqvarna 924SBE is its robust 208cc engine that provides ample power for effective snow removal. This engine is not only powerful but also designed for easy starting and consistent performance in low temperatures, ensuring that the snow blower can be relied upon even in the harshest winter conditions. The friction disk transmission enables smooth gear changes, allowing users to adjust the speed according to their needs, providing optimal control and ease of operation.

The 924SBE features a 24-inch clearing width and a 23-inch intake height, making it suitable for handling moderate to heavy snowfall. Its efficient auger system breaks up and collects snow quickly, while the impeller ensures effective throwing of snow up to 30 feet away, allowing users to clear their paths swiftly and without hassle. The adjustable chute and deflector allow for precise control over where the snow is thrown, making it easier to maneuver in tight spaces.

Another noteworthy technology of the Husqvarna 924SBE is its heated handgrips, which provide comfort to the operator during those long snow-clearing sessions. This feature ensures that users can maintain a firm grip on the controls without the discomfort of cold fingers. Additionally, the snow blower is equipped with LED headlights, which enhance visibility during early morning or late evening snow clearing tasks.

Comfort and convenience are further enhanced by the snow blower's sturdy construction and user-friendly design. The folding handlebar allows for easy storage and transportation, making it manageable for users with limited storage space. With its rugged tires, the Husqvarna 924SBE provides excellent traction on slippery surfaces, ensuring stability and ease of movement even in the most challenging snow conditions.

In summary, the Husqvarna 924SBE is a powerful snow blower that combines strength, technology, and user-friendly features. With its efficient snow-clearing capabilities, comfortable design, and reliable performance, this machine is an excellent choice for anyone looking to handle winter weather effectively. Whether clearing snow from a driveway, sidewalk, or patio, the Husqvarna 924SBE stands out as a dependable tool for winter readiness.
Top Page Image Contents