Husqvarna 924SBE owner manual Install Auger Control ROD See Figs, Check Tire Pressure

Page 6

ASSEMBLY / PRE-OPERATION

INSTALL AUGER CONTROL ROD (See Figs. 5 and 6)

The auger control rod has the short loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into control arm with loop opening up as shown.

2.With top end of rod positioned under right side of control panel, push down on rod and insert end of rod into hole in auger control bracket. Secure with retainer spring.

AUGER

CONTROL

ROD

RUBBER

SLEEVE

CONTROL

ARM

LOOP

OPENING

UP

FIG. 5

AUGER CONTROL ROD

AUGER

RETAINER

CONTROL

LEVER

SPRING

 

AUGER

CONTROL

BRACKET

FIG. 6

INSTALL DISCHARGE CHUTE / CHUTE ROTATER HEAD (See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotater head.

1.Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

2.Position chute rotater head over chute bracket. If neces- sary, rotate chute assembly to align square and pin on un- derside of chute rotater head with holes in chute bracket.

3.With chute rotater head and chute bracket aligned, position chute rotater head on pin and threaded stud of mounting bracket.

4.Install 3/8 washer and locknut on threaded stud and tighten securely.

CHUTE

 

 

ROTATER

 

3/8 LOCKNUT

HEAD

 

 

 

 

3/8 WASHER

 

 

PIN

 

 

THREADED

 

 

STUD

 

ALIGN BEFORE

ROTATER HEAD

CHUTE

MOUNTING

BRACKET

TIGHTENING LOCKNUT

BRACKET

FIG. 7

CHECK TIRE PRESSURE

The tires on your snow thrower were overinflated at the fac- tory for shipping purposes. Correct and equal tire pressure is important for best snow throwing performance.

•Reduce tire pressure to 14-17 PSI (19-24.5 N-m).

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 924SBE Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerRemove Snow Thrower from Carton Install Speed Control ROD See Figs Install Traction Drive Control ROD See FigsUnfold Upper Handle Install Auger Control ROD See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for starting the engineAuger HOW to USE Your Snow ThrowerStopping EngineUsing the CLEAN-OUT Tool See Fig To Throw Snow See FigTo Move Forward and Backward See Fig Before Starting the Engine Scraper BARTo Start Engine Snow Throwing Tips Before StoppingIf Recoil Starter has Frozen Before Each USE MaintenanceGeneral Recommendations LubricationCleaning EngineChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Shear Bolts See FigTo Replace Belts See Fig Storage OtherTroubleshooting Service Notes Repair Parts Auger Housing / Impeller Assembly Repair Parts KEY Part DescriptionControl Panel / Discharge Chute KEY Part Description Handles Repair Parts Drive Repair Parts Chassis / Engine / Pulleys KEY Part Description Wheels / Decals 532 40 Rantywar Tementsta Sion Tmita ILD NA SON ITP Eexc 4ON ITC ES

924SBE specifications

The Husqvarna 924SBE is a powerful and reliable snow blower designed for homeowners who need to tackle heavy snowfall and challenging winter conditions. Built with a mix of durability, efficiency, and innovative technology, this machine is engineered to offer superior performance in clearing snow from driveways and walkways with ease.

One of the main features of the Husqvarna 924SBE is its robust 208cc engine that provides ample power for effective snow removal. This engine is not only powerful but also designed for easy starting and consistent performance in low temperatures, ensuring that the snow blower can be relied upon even in the harshest winter conditions. The friction disk transmission enables smooth gear changes, allowing users to adjust the speed according to their needs, providing optimal control and ease of operation.

The 924SBE features a 24-inch clearing width and a 23-inch intake height, making it suitable for handling moderate to heavy snowfall. Its efficient auger system breaks up and collects snow quickly, while the impeller ensures effective throwing of snow up to 30 feet away, allowing users to clear their paths swiftly and without hassle. The adjustable chute and deflector allow for precise control over where the snow is thrown, making it easier to maneuver in tight spaces.

Another noteworthy technology of the Husqvarna 924SBE is its heated handgrips, which provide comfort to the operator during those long snow-clearing sessions. This feature ensures that users can maintain a firm grip on the controls without the discomfort of cold fingers. Additionally, the snow blower is equipped with LED headlights, which enhance visibility during early morning or late evening snow clearing tasks.

Comfort and convenience are further enhanced by the snow blower's sturdy construction and user-friendly design. The folding handlebar allows for easy storage and transportation, making it manageable for users with limited storage space. With its rugged tires, the Husqvarna 924SBE provides excellent traction on slippery surfaces, ensuring stability and ease of movement even in the most challenging snow conditions.

In summary, the Husqvarna 924SBE is a powerful snow blower that combines strength, technology, and user-friendly features. With its efficient snow-clearing capabilities, comfortable design, and reliable performance, this machine is an excellent choice for anyone looking to handle winter weather effectively. Whether clearing snow from a driveway, sidewalk, or patio, the Husqvarna 924SBE stands out as a dependable tool for winter readiness.
Top Page Image Contents