Husqvarna 96193002300 Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector

Page 16

SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before per- forming any service or adjustments:

1.Be sure throttle is in STOP position.

2.Remove safety ignition key.

3.Make sure the augers and all moving

parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute deflector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the deflector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deflector removed or damaged.

•To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 22)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a shoulder/shear bolt and hex nut. Should a for- eign object or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shoulder/shear bolt and spacer. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS

The impeller is secured to the impeller shaft with two (2) capscrew/shear bolts and hex nuts. Should a foreign object or ice become lodged in the impeller, the capscrews are designed to break, preventing damage to any other com- ponents. If impeller does not turn when auger control lever

is engaged, check to see if the capscrews have sheared. 16

To replace the capscrew/shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

1/4-20

1/4-20 x 1-5/8

1/4-20 x 2

LOCKNUT

CAPSCREW /

SHOULDER /

 

SHEAR BOLT

SHEAR BOLT

 

IMPELLER HUB

SPACER

 

 

 

IMPELLER

 

 

SHAFT

 

 

 

AUGER

 

 

HUB

1/4-20

 

 

LOCKNUT

AUGER HUB

AUGER SHAFT

FIG. 22

TO REMOVE BELT COVER (See Fig. 23)

1.Remove two (2) screws securing belt cover to frame.

2.Remove belt cover.

•Replace belt cover by installing cover and screws and tighten securely.

 

BELT

 

COVER

FRAME

SCREWS

FIG. 23

Page 15 Page 17
Image 16
Page 15 Page 17
Contents SBE OV Safe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerRemove Snow Thrower from Carton Unfold Upper HandleInstall Traction Drive Control ROD See Figs Install Auger Control ROD See FigsInstall Chute Deflector Remote Control See Figs Install Discharge Chute / Chute Rotator Head See FigCheck Tire Pressure Operation Know Your Snow ThrowerPrimer Ignition KEYMeets A.N.S.I. Safety Requirements Discharge chute control lever used to change the diHOW to USE Your Snow Thrower StoppingUsing the CLEAN-OUT Tool See Fig Power Steering Operation See FigTo Adjust Skid Plates See Fig To Move Forward and Backward See FigBefore Starting the Engine Check Engine OIL Level See FigScraper BAR see Fig To USE Drift Cutters See FigSnow Throwing Tips To Start EngineBefore Stopping If Recoil Starter has FrozenMaintenance General RecommendationsBefore Each USE LubricationSnow Thrower CleaningEngine Service and Adjustments To Adjust Snow Thrower HeightChute Deflector Shear Bolts See FigTo Replace Belts See Fig Storage OtherTroubleshooting Repair Parts KEY Part Description Control Panel / Discharge Chute KEY Part Description Handles Repair Parts Drive 532 41 Chassis / Engine / Pulleys Repair Parts Wheels / Decals 532 41 76-91 Wheel Assembly Warranty Statement

96193002300 specifications

The Husqvarna 96193002300 is a premium lawn mower known for its exceptional performance, durability, and advanced technology, making it an excellent choice for homeowners and professional landscapers alike. This mower combines innovation with user-friendly features, providing a seamless mowing experience.

One of the standout features of the Husqvarna 96193002300 is its powerful engine, which ensures reliable performance across various terrains. The engine is engineered for efficiency, offering strong torque while consuming less fuel. This not only translates to longer mowing times but also reduces the frequency of refueling, making it an economical choice for regular maintenance of your lawn.

The mower boasts a robust cutting deck that enhances its cutting capabilities. The wide deck design allows for a greater cutting swath, enabling faster mowing of larger areas. Additionally, the adjustable cutting height is another significant feature, allowing users to customize their mowing to achieve the desired lawn appearance. This versatility caters to different grass types and conditions, ensuring that the lawn is maintained to perfection.

Equipped with advanced technology, the Husqvarna 96193002300 offers a user-friendly interface that enhances the overall mowing experience. The intuitive controls and ergonomic handles provide comfort during prolonged use. The mower’s self-propelled functionality means that users can navigate across uneven ground with minimal effort, a feature that is particularly beneficial for those with larger properties or challenging landscapes.

Moreover, the Husqvarna 96193002300 incorporates innovative safety features that prioritize user protection. These include safety switches that stop the blade when the user releases the handle and a robust frame construction that minimizes vibrations, ensuring a steady grip and control during operation.

For added convenience, the mower features easy-to-access maintenance points, making it simple to keep the machine in peak condition. Regular maintenance is crucial for longevity, and Husqvarna has designed this model with the user in mind.

In conclusion, the Husqvarna 96193002300 is a top-notch lawn mower that excels in performance, features, and safety. Its combination of power, efficiency, and user-friendly technology makes it a leading choice for anyone serious about lawn care, providing excellent results season after season. Whether you are a homeowner seeking to maintain a pristine lawn or a professional landscaper looking for reliable equipment, this mower stands out as a valuable investment.
Top Page Image Contents