Bolens 31AE6GKF500 warranty Shear Pin Storage optional, Drift Cutters If Equipped, Clean-Out Tool

Page 7

The extension cord is fastened with a cable tie to the rear of the auger housing for shipping purposes. Cut the cable tie and remove it before operating the snow thrower.

CAUTION: Prior to operating your snow thrower, refer to Auger Control Test on page 11. Read and follow all instructions carefully, and perform all adjustments to verify your snow thrower is operating safely and properly.

Shear Pin Storage (optional)

An area for convenient shear pin storage is located at the rear of the dash panel.

Drift Cutters (If Equipped)

Drift cutters should be used when operating the snow thrower in heavy drift conditions.

•On models so equipped, drift cutters and hardware are assembled to the auger housing inverted.

•Remove the carriage bolts and wingnuts securing the drift cutters to the housing.

•Reposition drift cutters so they face forward as shown in Figure 3-6. Secure with hardware previously removed, wingnuts should be fastened on the outside of the housing as shown.

If your unit is not equipped with drift cutters, you may contact Customer Support as instructed on page 2 for information regarding price and availability.

Clean-Out Tool

The clean-out tool is mounted to the rear of the auger housing and is designed to clear a clogged chute. Refer to page 9 for instructions on how to properly use it.

NOTE: This item is fastened with a cable tie to the rear of the auger housing at the factory. Cut the cable tie before operating the snow thrower.

WARNING: Never use your hands to clean snow and ice from the chute assembly or auger housing.

Lamp Wiring Harness (If equipped)

The post on the cable tie attaching the lamp wiring har- ness to the lower handle should be plugged into the hole in the lower handle. Pull the slack portion of the wiring harness through the cable tie to prevent interference with the recoil starter handle. See Figure 3-7.

Skid Shoes

Position the skid shoes based on surface conditions. Adjust upward for hard-packed snow. Adjust downward when operating on gravel or crushed rock surfaces. See “Making Adjustment” Section.

Figure 3-6

Figure 3-7

Tire Pressure

The tires are over-inflated for shipping purposes. Check the tire pressure before operating the snow thrower. Refer to the tire side wall for tire manufacturer’s recommended psi and deflate (or inflate) the tires as necessary.

NOTE: If the tire pressure is not equal in both tires, the unit may not travel in a straight path and the shave plate may wear unevenly.

3

Setting Up

Your Snow

Thrower

CAUTION

Prior to operating your snow thrower, refer to Auger Control Test on page 11. Read and follow all instructions care- fully and perform all adjustments to verify your unit is operating safely and properly.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 769-04208 Two-Stage Snow Thrower07/09/08 Finding and Recording Model Number Table of ContentsCustomer Support Your Responsibility Restrict the use Safety SymbolsThere are rotating blades inside Do not use the engine’s electric starter in the rainYour Responsibility Safe Operation PracticesTraining PreparationAverage Useful Life Maintenance & StorageOperation Do not modify engineSetting Up Your Snow Thrower Drift Cutters If Equipped Clean-Out ToolLamp Wiring Harness If equipped Shear Pin Storage optionalKnow Your Snow Thrower Operating Your Snow Thrower$26% #/.42 Engines with Starter Handle non-electric start Gas & Oil Fill-UpStarting the Engine Stopping the EngineTo Engage Augers To Engage DriveAuger Control Test Drive Control & Shift Lever Making AdjustmentsShift Cable Chute ControlTo adjust the auger control, refer to You can also check the adjustment as followsSpace between the skid shoes and the ground can be adjusted To adjust the skid shoesAugers Maintaining Your Snow ThrowerEngine LubricationRoll the auger belt off the engine pulley. See Figure Auger Belt ReplacementUnhook the support bracket spring from the frame To inspect the friction wheel, proceed as follows Drive Belt ReplacementFriction Wheel Inspection Remove and replace belt in the reverse orderProblem Cause Remedy Trouble Shooting12.08.06 WarrantyAuger Housing COMPONENTS/COMPOSANTS DU Logement DES Tarières 42C Optional/en optionPart RÉF Pièce Description Remarque Lhabitacle peut être légèrement différent 5952 30 in/poPart Description RÉF Pièce 31AE6GKF500 La page 2 pour ce qui concerne les pièces et/ou accessoires Parts List Pièces DétachéesFor parts and/or accessories refer to customer support on Adressez-vous au «Service après-vente»Way Chute Control with tall chute Manual Chute ControlPart RÉF Pièce Description Page Page 06.08.12 GarantieDépannage Solution Causes ProblèmePropre Remisage de InstructionsSouffleuse Souffleuse Transmission de courroie la de RemplacementVis la REMARQUEréinstaller de PAS N’oubliez Tarières La de courroie la de RemplacementPatins et plate Lame TarièreRéglages Vitesses de changement de Câble Et transmission la de CommandeGoulotte la de Commande Vitesses de levierMoteur du Arrêt Faites Ne Moteur du marche en Mise’huile et d’essence Pleins ÉlectriqueGoulotte la de dégagement de Outil Fonctions 4 à goulotte la de CommandeRoues des d’orientation Commande PhareLa sur consignes Souffleuse la de CommandesAmorçeur Explosif sont peurs Va les et inflammableÉchéant cas le Phare du câblage de FaisceauPneus des Pression Option en cisaillement De goupille la de RemisageLes Remarque Cette RemarqueGaz de émissions les concernant Avis Remisage et EntretienResponsabilité Votre Moyenne utile vie de Durée’essence de Manipulation PréparationFormation VotreMachine la d’utiliser Sécurité de Symboles’utilisation La voir détachées Pièces Vente-après ServiceModèle de numéro le trouver Pour Matières des Table07/09/08 04208-769 Phases deux neige à Souffleuse

31AE6GKF500 specifications

The Bolens 31AE6GKF500 is a standout model in the realm of outdoor power equipment, particularly designed for homeowners looking for a reliable and efficient lawn tractor. This machine combines innovative technology with a robust construction, catering to various landscaping tasks while ensuring superior performance.

One of the most prominent features of the Bolens 31AE6GKF500 is its powerful engine. Equipped with a reliable 382 cc OHV engine, this tractor provides ample power to tackle even the most challenging terrain. The engine is designed for easy starting and fuel efficiency, making it a practical choice for homeowners. The 31AE6GKF500 also features a hydrostatic transmission, which delivers smooth and responsive shifting without the need for manual gear changes. This allows users to focus on their mowing tasks without the interruption of gear management.

The cutting deck is another significant highlight of this lawn tractor. The 31AE6GKF500 hosts a 30-inch cutting deck, designed to provide a clean and even cut. This size is particularly advantageous for homeowners with smaller lawns or those navigating tighter spaces. The deck offers multiple cutting heights, allowing users to adjust the mower to suit their lawn's specific needs. This flexibility encourages a healthier lawn by promoting better grass growth.

In addition to its cutting capabilities, the Bolens 31AE6GKF500 is designed with user comfort in mind. It features a high-back padded seat, providing support during extended mowing sessions. The ergonomically designed controls are easily accessible, ensuring that users can operate the tractor with minimal effort. Furthermore, the compact size of the tractor ensures excellent maneuverability, making it easy to navigate around flower beds, trees, and other obstacles.

Maintenance is also a breeze with the Bolens 31AE6GKF500. It is designed for easy access to engine components, ensuring that routine maintenance tasks such as oil changes and air filter replacements can be performed with minimal hassle. The durable construction further guarantees longevity, allowing this lawn tractor to withstand the rigors of regular use.

Overall, the Bolens 31AE6GKF500 stands out as an excellent choice for homeowners seeking efficiency and reliability in their lawn care equipment. Its powerful engine, innovative cutting deck, user-friendly design, and easy maintenance make it a valuable addition to any outdoor toolkit. Whether you're mowing the lawn, navigating tight spaces, or simply maintaining your yard, the Bolens 31AE6GKF500 proves to be a dependable partner in achieving a well-manicured landscape.
Top Page Image Contents