Installation (Cont.)
7)If you plan to attach the Sub10F directly to the joists using screws, use wood shims to prevent dam- age to the Sub10F enclosure. It is important to use wood shims so that there are no gaps between the sides of the Sub10F and the joists. Remember to drill pilot holes. See diagram below.
Wood Shims
8)Attach the speaker wire securely to the terminals on the end of the Sub10F.
9)Install the floor register. For installations on hardwood floors, a foam gasket may need to be placed under the floor register.
Specifications
| SA1 Power Amplifier | Sub10F |
|
|
|
Frequency Response (±3dB) | — | |
|
|
|
Recommended Amplifier Power | — | Must use with SA1 amplifier |
|
|
|
Nominal Impedance |
| 8 Ohms |
|
|
|
Bass Unit | — | 10" DCDTM copolymer |
Amplifier Power < 1% THD | 140 watts continuous, 8 ohms | — |
| 210 watts continuous, 4 ohms |
|
|
|
|
Crossover Frequency | ||
| 24dB/Octave Lowpass |
|
|
|
|
Inputs | L&R stereo RCA line level | — |
| & LFE RCA line level for |
|
| crossover bypass |
|
|
|
|
— | ||
| max. 1/8" diameter female |
|
| plug with tip positive |
|
|
|
|
External Dimensions | 31/2 x 19 x 121/2" (89 x 483 x 318mm) | 141/16 x 311/2" (357 x 800.1mm) |
| [H x W x D w/o feet] |
|
| 35/8 x 19 x 121/2" (92 x 483 x 318mm) |
|
| [H x W x D w/feet] |
|
| 2 EIA rack space w/feet removed |
|
|
|
|
Mounting Depth (from surface) | — | 81/4" (209.55mm) |
|
| 91/4" including 1” gasket |
5