Preparing Plow for Use

7.Insert the standard into the hub on the

.fork and secure it with the pin. Leave an equal amount of the pin extending on each side of the hub.

8.Assemble the coulter blade hub to the blade using three carriage bolts, flat

washers, hex lock nuts.

9.Assemble the fork and coulter with the axle, aligning the squares. Install two flat washers. and secure with the cotter pin. Bend the legs of the pin over the axle.

10.Mount the coulter/fork assembly on the left side of the plow beam using the clamp and U-bolt. Insert two spacers between the beam arms, then secure the U-bolt with 94" hex nuts: tighten the nuts securely.

After assembly, refer to PLOW

ADJUSTMENTS to set the coulter.

11. Install the hub on the gauge wheel using three !%// x 3/4't carriage bolts, plain washers, and hex lock nuts.

12.Install the flat washer on the hex bolt, insert the bolt through the hub. then add a second flat washer and the hex j a m nut. Secure with the lock washer and hex nut on the inside of the bracket as shown.

13.Mount the gauge wheel assembly on the plow beam standard using the short U-bolt and secure with 94" lock washers and hex nuts.

After assembly, clean the moldboard with a ragsoaked in turpentine, kerosene or naphtha so that dirt will be less likely to stick to the protective coating. The coating can be removed with an old brick or a pumice stone, but this usually isn't necessaq unless the soil is too wet or stice.

-b Work in a well-ventilated area and handle cleaning materials with care. Wipe up any spilled liquid immediately and make sure the area is dry before starting the tractor.

SPACERS NUTS '

-STANDARD

C O U L T E ~BLADE

WASHER

HEX BOLT

h1WASHERS

BRACKET

LOCK WASHERS, If / / I

3755790, PL752A specifications

Honda Power Equipment continues to uphold its reputation for reliability and innovation with the introduction of the Honda Power Equipment 3755790, PL752A. This robust piece of equipment is designed for a variety of landscaping and power needs, making it a versatile choice for both commercial and residential users.

At its core, the PL752A is equipped with a powerful engine that ensures exceptional performance. Honda is known for its advanced four-stroke engine technology, which provides higher efficiency, reduced emissions, and lower noise levels compared to traditional two-stroke engines. This translates to a product that not only performs well but also aligns with environmental standards.

One of the standout features of the 3755790, PL752A is its advanced start system. The engine is designed for easy starting, reducing the hassle often associated with outdoor power equipment. The inclusion of an automatic choke and reliable recoil start ensures that users can get to work quickly without worrying about complicated starting procedures.

Durability is another hallmark of the Honda Power Equipment PL752A. Constructed with high-quality materials, this equipment can withstand the rigors of frequent use in various environments. The robust design makes it suitable for tackling tough jobs, whether it be landscaping, construction, or routine maintenance tasks.

The PL752A is also designed with user comfort in mind. It features ergonomic controls and a comfortable grip, allowing for extended use without discomfort. The lightweight design enhances maneuverability, making it easier for users to transport and handle the equipment.

Another impressive characteristic is the fuel efficiency of the PL752A. Honda’s engineering focuses on maximizing power output while minimizing fuel consumption. This not only saves users money but also reduces the frequency of refueling, allowing for longer work sessions.

Honda Power Equipment stands out in the market due to its commitment to quality and performance. The 3755790, PL752A is a testament to this ethos, combining innovative technology with practical features tailored for the demands of modern landscaping and power needs. Whether you’re a seasoned professional or a DIY enthusiast, this equipment promises reliability, efficiency, and ease of use, making it an essential addition to your toolkit. With Honda, you can trust that you're investing in durable equipment that will get the job done effectively.