PRE-OPERA’MONADJusTlyIENTs

1.Installthe plow on the tractor: Secure the link pins to the lower links with spring pins. Install the hitch upper link at the top hole in the mast and securewith the hitch

Pin.

2.Working on flat ground, raise the left side of the tractor 6” - 7“ and block at this height (Thissimulates a plowing position-right tractor tires in furrow wall, left tires on land.)

3.Raise and lower the plow with the hydraulic lift; the plow bottom should contact the ground with the lift lever in the lowered or “float”position.

Next, raise the plow slightly offthe ground and adjust the upper and lower links so the plow bottom is completelylevel with the ground. Place!the hitch in the float position and check the plow bottom: it should rest cornpletelyflaton the ground.

Finally, adjust the upper link slightly so the landside heel is approximately Vi‘’ off the ground.

4.Align the plow directly behind the tractor (upperlink extended straight toward rear).

With a straightedge (2 x 4, steel bar, etc.), extend a line from the inside edge of the right rear tire on back to the plow bottom. (Thissimulates a furrow wall.) For the plow to cut 12‘‘ wide (standard width).the. bottom should reach this line.

To increase or decrease the standard cutting width, seePLOW ADJUSTMENTS on the next page.

5.Set the gauge wheel approximately 5” above the ground. This will provide a controlled 6”plow depth and prevent the plow from going too deep in soft and/or wet spots.

3755790, PL752A specifications

Honda Power Equipment continues to uphold its reputation for reliability and innovation with the introduction of the Honda Power Equipment 3755790, PL752A. This robust piece of equipment is designed for a variety of landscaping and power needs, making it a versatile choice for both commercial and residential users.

At its core, the PL752A is equipped with a powerful engine that ensures exceptional performance. Honda is known for its advanced four-stroke engine technology, which provides higher efficiency, reduced emissions, and lower noise levels compared to traditional two-stroke engines. This translates to a product that not only performs well but also aligns with environmental standards.

One of the standout features of the 3755790, PL752A is its advanced start system. The engine is designed for easy starting, reducing the hassle often associated with outdoor power equipment. The inclusion of an automatic choke and reliable recoil start ensures that users can get to work quickly without worrying about complicated starting procedures.

Durability is another hallmark of the Honda Power Equipment PL752A. Constructed with high-quality materials, this equipment can withstand the rigors of frequent use in various environments. The robust design makes it suitable for tackling tough jobs, whether it be landscaping, construction, or routine maintenance tasks.

The PL752A is also designed with user comfort in mind. It features ergonomic controls and a comfortable grip, allowing for extended use without discomfort. The lightweight design enhances maneuverability, making it easier for users to transport and handle the equipment.

Another impressive characteristic is the fuel efficiency of the PL752A. Honda’s engineering focuses on maximizing power output while minimizing fuel consumption. This not only saves users money but also reduces the frequency of refueling, allowing for longer work sessions.

Honda Power Equipment stands out in the market due to its commitment to quality and performance. The 3755790, PL752A is a testament to this ethos, combining innovative technology with practical features tailored for the demands of modern landscaping and power needs. Whether you’re a seasoned professional or a DIY enthusiast, this equipment promises reliability, efficiency, and ease of use, making it an essential addition to your toolkit. With Honda, you can trust that you're investing in durable equipment that will get the job done effectively.