Honda Power Equipment PL752A, 3755790 manual Operation, Width ofCut

Page 6

OPERATION

PLOWADJUSTMENTS

Width ofCut

Following proper assemblyand initial adjustments, the plow cut width will be 11" -12"when the right reatwheel is running against the furrow wall.

To change the width, loosen the U-Boltsand move the beam along the mast an inch at a time to find the best width: Move to the right to decrease, and to the left to increase the width.

,UPPER LINK

NOTE. Under extreme or heavy plowing conditions,you may prefer to reduce the cut width, rather than the plow depth, to avoid overloading the tractor.

Depth

UPPER UNK

The plow point pitch (orsuck1 iscontrolled

 

by the hitch upper link.Shortening the link

 

will make the plow go deepec lengthening the

DEPTH GAUGE WHEEL

link will cause the plow to runshallow. With

 

the link pre-adjusted as described earlier, the

 

plowing depth should be 5" - 6//when the

 

tractor wheels are running in a previously

 

plowed h w .

 

NOTE: Always readjust the gauge wheel and

 

check the plow lever ( s e e next page) after

 

changing the plowing depth.

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Page Warranty Service Assembly @,lrlock washers, and hex nutsPreparing Plow for Use PRE-OPERA’MONADJusTlyIENTs Operation Width ofCutCoulter Maintenance PlowingBadly worn plowshare American Honda Moldboard Plow Page IEOlpDA Code #

3755790, PL752A specifications

Honda Power Equipment continues to uphold its reputation for reliability and innovation with the introduction of the Honda Power Equipment 3755790, PL752A. This robust piece of equipment is designed for a variety of landscaping and power needs, making it a versatile choice for both commercial and residential users.

At its core, the PL752A is equipped with a powerful engine that ensures exceptional performance. Honda is known for its advanced four-stroke engine technology, which provides higher efficiency, reduced emissions, and lower noise levels compared to traditional two-stroke engines. This translates to a product that not only performs well but also aligns with environmental standards.

One of the standout features of the 3755790, PL752A is its advanced start system. The engine is designed for easy starting, reducing the hassle often associated with outdoor power equipment. The inclusion of an automatic choke and reliable recoil start ensures that users can get to work quickly without worrying about complicated starting procedures.

Durability is another hallmark of the Honda Power Equipment PL752A. Constructed with high-quality materials, this equipment can withstand the rigors of frequent use in various environments. The robust design makes it suitable for tackling tough jobs, whether it be landscaping, construction, or routine maintenance tasks.

The PL752A is also designed with user comfort in mind. It features ergonomic controls and a comfortable grip, allowing for extended use without discomfort. The lightweight design enhances maneuverability, making it easier for users to transport and handle the equipment.

Another impressive characteristic is the fuel efficiency of the PL752A. Honda’s engineering focuses on maximizing power output while minimizing fuel consumption. This not only saves users money but also reduces the frequency of refueling, allowing for longer work sessions.

Honda Power Equipment stands out in the market due to its commitment to quality and performance. The 3755790, PL752A is a testament to this ethos, combining innovative technology with practical features tailored for the demands of modern landscaping and power needs. Whether you’re a seasoned professional or a DIY enthusiast, this equipment promises reliability, efficiency, and ease of use, making it an essential addition to your toolkit. With Honda, you can trust that you're investing in durable equipment that will get the job done effectively.
Top Page Image Contents