Maintenance, Lubrication | Shindaiwa 75RS, 80045 specification

Maintenance

■ Never store unused material in the

spreader. Return unused material

to its original container.

■ Wash the spreader thoroughly after

each use. See Figure 12. Remove

the gear cover and wash the gears

thoroughly. Then dry completely in

the sun or a heated area.

■ Lubrication

a. Lubricate the face of the gear

teeth with dry graphite.

Reinstall the gear cover.

b. Lightly oil the axle bearings in

the frame. See Figure 13.

c. Apply oil to the impeller shaft

bearing in the hopper, pivot

points on the shut-off plate,

75RS

Figure 12

Oil Control knob and

Operation

Effective swath

width approximately

10-12 feet on center.

Overlap

and the spring in the housing

wire, shut-off plate,

Oil bearing in

behind the control plate.

See Figure 13.

■ Gear mesh should be checked

regularly, especially during high-

use periods. The clearance between

the axle gear and the pinion gear

should be very close, but not tight.

If adjustment is required:

a. Loosen the axle collar set screw

and hold the gears together.

b. Hold the axle gear lightly

against the gear support and

tighten the axle collar set

screw.

c. Spin the drive wheel to make

sure the gears run freely and

smoothly. See Figure 14.

■ Periodically clean the surface of the

impeller to remove buildup of

material. A buildup could cause the

spread pattern to change.

■ Maintain tire pressure at 20–25 psi.

and control plate

spring

Figure 13

Dry Graphite

Figure 14

the hopper

75RS

Oil

Axle

Collar

Oil

Figure 10

6.Where appropriate, apply header strips around the area to be treated, then push the spreader at a walking speed about 2 1/2 mph (18 feet in five seconds). To decrease the spread width in confined areas, reduce walking speed. Space your trips across the area as shown in Figure 10.

7.When transporting the spreader, make sure the control knob is pushed in and locked.

8.Empty the spreader after each use, and return leftover material to its original container.

75RS, 80045 specifications

The Shindaiwa 75RS,80045 is a highly regarded trimmer known for its robust performance and advanced features that cater to both professional landscapers and home garden enthusiasts. This model stands out due to its efficient and powerful engine, ergonomic design, and innovative technologies that make yard work more manageable and enjoyable.

At the heart of the 75RS,80045 lies a well-engineered 75cc engine that ensures reliable power delivery. This potent engine enables the trimmer to tackle thick grass, weeds, and underbrush with ease, making it suitable for various landscaping tasks. The engine is designed for fuel efficiency, allowing operators to work longer without frequent refueling. Additionally, it employs advanced low-emission technology, complying with stringent environmental standards while maintaining high performance.

One of the key features of the Shindaiwa 75RS,80045 is its ergonomic design. The handle is thoughtfully constructed to reduce operator fatigue, allowing for extended use without discomfort. The trimmer's balance and lightweight construction further enhance maneuverability, making it easy to navigate through tight spaces and around obstacles. This focus on user comfort ensures that both professional landscapers and hobbyists can operate the equipment efficiently.

The 75RS,80045 also incorporates innovative technologies to improve functionality. The Easy Start system significantly reduces the effort required to start the engine, allowing users to get to work quickly. Moreover, the advanced cutting system features durable and interchangeable cutting heads, enhancing versatility and performance. This adaptability makes it possible to switch between tasks, whether it's trimming, edging, or clearing brush.

Another noteworthy characteristic is the trimmer’s robust build quality. Constructed from high-grade materials, the Shindaiwa 75RS,80045 is designed to withstand harsh outdoor conditions, ensuring durability and longevity. This resilience means that it can handle the rigors of professional use while maintaining peak performance over time.

In summary, the Shindaiwa 75RS,80045 is a top-tier trimmer that combines exceptional performance, user-friendly features, and durable construction. Whether for commercial landscaping or personal use, this model is engineered to meet the demands of any user, making yard maintenance not just easier, but also more effective. Its blend of power, efficiency, and comfort makes it a valuable addition to any lawn care toolset.